廃油ストーブの製作に挑戦【その16】高温が測れる放射温度計を購入。燃焼室温度を測定してみました。

Поделиться
HTML-код
  • Опубликовано: 10 фев 2025
  • 10月くらいから作り始めた廃油ストーブ。なかなか自分の理想の廃油ストーブになりません。愛白い炎を出すコツはなんとなくつかめてきましたが、もっといろいろテストして、最高の物を作りたい!ということで、今回もテストの動画です。というかしばらくテストが続きます。
    動画内で絶賛しているドリル
    NACHI(不二越)ステンレス用ドリル
    www.monotaro.c...
    廃油ストーブの製作を今からする方、作っているけど思うようにならない方の参考になればと思います。
    参考になったと思う方、次も見たいと思った方。イイね!とチャンネル登録お願いします。今後の励みになります。
    その他動画内で使用している材料は下記です(構成は少しづつ変わっています)
    ブロア
    www.sengoku.co...
    デジタルディレイタイマー コントロールスイッチ リレーモジュール 調整可能 0.1秒から999時間
    amzn.to/3EskgBL
    エアブロワー, ダブルボールタービンエアブロワー冷却ファンピクニックキャンプ用暖房器具バーベキュー12V
    amzn.to/3mpdztP
    Padarsey 直流安定化電源 AC DC 20A 12V コンバーター 安全保護 回路 装置 最大 (12v 20A)
    amzn.to/30Lk9TU
    ダイヤフラムポンプ
    アマゾンで購入ししましたが、現在購入できなくなっています。
    鋼材の購入はこちらからでした
    www.umemotosho...
     私は「自分でできることはやってみよう!」そういう考えでいろいろやってます。動画もいろいろ上げてるので見ていってください。
    チャンネルページ
    / @diychallengeclub
    #廃油ストーブ
    #廃油ストーブ自作
    #廃油ストーブDIY
    #Waste oil heate
    #廃油ストーブ

Комментарии • 10

  • @vgjadmwp
    @vgjadmwp Год назад +1

    はじめまして きれいな青に炎で素晴らしいですね。同じのを作りたいです。オイル送る装置と送風機 型番とか教えて下さい。それと、一辺250ミリの角パイプしか無いけど、本体は丸パイプの厚いのしかダメですか?

    • @DIYchallengeclub
      @DIYchallengeclub  Год назад

      ご視聴とコメントありがとうございます。
      動画の説明欄をご覧ください、そちらにリンクを貼っています。
      動画制作時点の情報なので、動画の回が進むにつれて商品の構成が変わっています。
      なので、引き続き動画のほうご視聴いただけたらと思います。

  • @InvernessFarm
    @InvernessFarm 2 года назад +1

    How big is the holes? What is the size of the drill bits?

    • @DIYchallengeclub
      @DIYchallengeclub  2 года назад

      Thank you for watching and commenting.
      The size of the hole is 1.5 mm, and the thing in the first half of the movie has 15 holes per step. In the second half of the video, there are 14 holes.

    • @InvernessFarm
      @InvernessFarm 2 года назад +1

      @@DIYchallengeclub do you think the second pipe works better than the first pipe?

    • @DIYchallengeclub
      @DIYchallengeclub  2 года назад

      From 16 minutes and 22 seconds of this video that received the comment, it is a state of combustion test using the newly produced blow pipe.
      Personally, I think that the performance is as good as the blow pipe used in the first half, or better than that.

    • @InvernessFarm
      @InvernessFarm 2 года назад +1

      @@DIYchallengeclub ok. Thanks. One more question. What is the distance between each section of the holes for the second pipe?

    • @DIYchallengeclub
      @DIYchallengeclub  2 года назад

      It is difficult to understand because there are no subtitles, but the nogis is applied to the one wrapped in paper in the first half. That distance is the distance that made a hole this time.

  • @helmutstarkloff2515
    @helmutstarkloff2515 2 года назад

    Hallo, was für Öl verwendest du?

    • @DIYchallengeclub
      @DIYchallengeclub  2 года назад +1

      Vielen Dank fürs Zuschauen und Kommentieren.
      Das verwendete Öl ist eine Mischung aus Altöl, die beim Ölwechsel von Auto und Motorrad, Bremsflüssigkeit und Kühlerflüssigkeit zu Hause herauskam.