How to Make a Fog Machine at home- Easy Way
HTML-код
- Опубликовано: 11 сен 2024
- Learn how to make a low cost fog machine at home using material like 12 volt chamber fan, plastic pipe, glycerin , water and 9 volt battery. almost material you can find from home or junkyard. Fog machine is used in stage performance , special effect and laser shows etc.
Yea, great! The can will get hot and burn through the styrofoam and eventually through the plastic container. Love it!
Do you really need a hose if that's just for fan to pull air? Smaller hole lower somewhere would just work fine?
That was so creative! Good job
nice
+Navin Khambhala # crazyNK nice nedi eee dindix
]
its all nicely done but what about having a heating wire instead of a fire?
how much ml you take .. glycerine ?? and how long (hours) it lasts ?? is it safe if we put our face in that Fog ?! please help to answer my questions .. i will thankful to you : )
How long are the drops?
And that is how you burn the house
NICE VIDEO
gliserin bisa diganti dengan bahan lain apa ?
I like this but the fan and hose don't seem to have a function really.Thanks nonetheless
the fan will melt because of heat. alumium can gets heat and foam piece will melt and plastic will burn.
Wie mann eine Nebelmaschiene Baut is rigt you writed Wie mann Nebelmaschiene this is false.
junkyard you are gujrati?
+chakshu trentiya why?
e tare .ești Roman ?
it's very simple
not bad nice.....................................
+vasanth vasanth sox icine
Okay, but better to have a drip system for thicker fog.
Сергей Бодров or to keep the can for not overheating once juice is out.
yo tengo una y es de 400 w y no parece de 400 parece de 900
It will brust out if kept it for some more time !!
TERRIBLE SAFETY PRACTICES: DO NOT USE EXACTO KNIFE, USE SCISSORS FOR THIS! DO NOT CUT TOWARD YOUR FINGERS ! also, areosol cans are under pressure!!! HE also cuts the METAL can down toward his thumb, WITHOUT GLOVES, later, he then hides his fingers under the plastic under the exacto knife! This guy is exhibiting self destructive behavior, and may be the type who wants to see you bleed and cry so he doesn't feel alone!! just a tip: if you don't want to be cut badly, point the tip of the blade away from you and cut outwards not toward your fingers. I wouldn't trust this suicidal fool to babysit my dog! He'd probably leave the gate open!
You are applying great force, and doing something you're not used to doing, namely: cutting through slippery thick, flexible plastic suspended in air. No one in industry would ever allow this character to work like this--he'd be advised on safety or sent home. Further, he be suspected and watched for unprofessional practices, and suspected of endangering others.
'Sharps' are only to be used on a flat surface with solid support!! It is a VERY sharp blade, like a razor blade, and not scissors. Scissors are the correct tool. So skip the ensuing drama when someone gets badly hurt. you'll sever a nerve and never feel the area around your finger again, or even loose a finger if you cut the vein. It will always feel cold your whole life, as a reminder. At the very least, you'll spoil your project and scare yourself, and ruin your day, not to mention the hospital expense. you've been compassionately advised.. now have safe fun and keep your fingers, kids.
like a vapor
Problem
Please mind your fingers.
bu nedi eee
Hindi ma kar
Gay
Vincent Morales are you fucking 8?
That's hella hard to make
nice