The EASIEST Way to Fix Your Squarebody Window Roller

This is one of the easiest ways to fix a window that isn't rolling down smoothly. If you have a square body Chevy or GMC this is the fastest way to make your window work smooth again. If your K5 Blazer window wont roll up or your window wont roll down this fix will help you. This works on manual K5 blazer windows and will fix a manual K5 Blazer or GMC Jimmy rear window as well. You can take out the window gear to do this but I show you how to fix your window without taking it apart. #sinistersquares #squarebody #windowrepair #squarebodies
Wheel bearing grease affiliate link:
amzn.to/3jIBoyt

[@jacobfuckingjones]

Appreciate the easy to follow tutorial man 👌👌

[@TheBlazerBeam]

Happy to help! Stick around and you’ll find a bunch more

[@RobbyD-kn1gq]

​​@@TheBlazerBeamSo, what if the rear window is all the way down?! How would you get to the wire behind the rear window that rolls it up?!

[@TheBlazerBeam]

From experience with my Blazer, the switch and cable are all the way at the bottom so it’s still accessible

[@calebpratt78]

I’m kinda pissed I didn’t think of using wheel bearing grease, I gotta go take my door apart right now😂

[@TheBlazerBeam]

It was years before I even thought about using it so it’s all good!

[@markduvall5918]

Thank you so much I got to do this on my 74 C10..

[@PhilAVega]

Thanks

[@halleffect1]

Source for replacement rollers? my regulators are fine but the nylon rollers are shot

[@prodkivya]

🐐

[@samblnc]

Great video! So, when I close the driver door with the window down, the window falls out of the guide/channel (which makes it hard to open/close, even after greased). I have to keep resetting the window inside the channel. Any tips?

[@TheBlazerBeam]

Might have bad channel rubber within the door or roller mechanism. The rail could be degraded so the windows isn’t fully resting within it.

[@TEENWOLFFREAK]

Hi! My windows roll like this but also my window tilts (not inward or outward, but down the side) like one side is rising but the other isnt, however i can get it fully rolled up as long as i pull it back straight every inch or so. Any advice?

[@TheBlazerBeam]

Take off the door panel, look at the channel the window sits in and the guide channel on the sides. Watch what happens as you roll it up and down.