Whether I or anyone else agrees with your wood selection, in my opinion, has nothing to do with your build. Your craftsmanship with what you have to work with is excellent. Thanks for another way to look at building a great woodworking bench.
I built a bench out of 2x4s, 2x6s, and 4x4s, figuring it would be temporary but 40 years later, I was still using it. It was more than adequate. The tail vice used a threaded rod for a screw and a coupling nut but it was hidden inside the wooden parts. You could do that. See Frank Klausz' workbench in Fine Woodworking magazine. Braise the long nut to a big washer and the thread rod never failed. You're doing a great job.
Your videos bring back great memories when I was an apprentice and worked with my father. We used mostly hand powered tools, rip, cross cut and coping saws, planes, chisels, brace and bits, miter box..ect that l would slowly acquire over time. l still have and use a sharpening stone that my Dad used when he was an apprentice, thanks for your great videos and memories.
It was great to see a new video, especially one as challenging as this bench. I'm always amazed at your willingness to do all of the complicated and exacting milling and joinery procedures by hand, especially when so many craftsmen are resorting to CNC machines. It's rare that we get to see how furniture was traditionally constructed, and can still be, with hand tools, patience, and attention to detail.
Thank you! I felt a bit bad for using the power planer and circular saw so much here, so I’m glad to hear that you think it still comes across as traditionally handmade!
I agree with Patrick. You’re a true craftsman capable of doing so much of the joinery by hand tools. I’m impressed. Good job, everything was a nice tight fit.
With my large delta table saw and an outfeed table and a small secondhand work bench, all in a very small room off the house, I realize I have to adjust my priorities and make some changes. I think the saw needs to go, and I need to make a larger bench as the center point of my work area. I have access to full cabinet shop tools if I ever need to do a massive amount of stock prep, but my small sanctuary should be rearranged to focus on my projects and not my stock prep.
Dude is a savage with that massive handsaw.. I've never seen anybody on RUclips cut wood with just a handsaw the way he does.. It's refreshing to see a real ols school woodworker at such a young age. I need to practice moe with my handssws. There's definitely a technique. I watch another guy @Wortheffort who uses hand tools most of the time too. He's a bit diffrent b'cos I think he teaches woodworking n college or something but this young guy here is special at his craft. I've not watched any of his vieos for ages. I will be back now watching as I go out into my shop again.. Beautifully crafted bench my friend
I really enjoyed watching your workbench build. I am an amateur luthier and I have lately been greatly enjoying using Northern European style (E.C. Emmerich and Ulmia) wooden bodied planes and tools and now I would like a traditional workbench with a tail vise and dog holes. My current bench does not have these as I am simply clamping things in place. I greatly appreciate your sharing your thinking / consideration about the build as well as the detailed construction video. Thanks again, I hope you get great service from your beautiful workbench.
I inherited my father's shop equipment. He had two, one in in the city house, which he built, and one at the family “Semester-Hus”. There were two of most of the machines along with many hand tool, including an almost complete set of metal planes, missing the #1 and #2 and a few specialty planes. So I have two bandsaws, two drill presses, two wood lathes (gave one away), two jigsaws, and multiple routers. All of them in or approaching the antique category. Three sets of carving chisels and a large variety of hand chisels most need sharpening, which brings me to a question…what methods do you use for sharpening? Recently just finished having my shop building insulated so the tools won’t be too hot or cold! Since repositioning equipment and benches I will be building a new base for one of my workbenches your excellent video will definitely be a rewatched video and the bench will incorporate some of your bench features. Will be looking forward to watching more of your videos.
good job man, I totally agree with not building a bench right away, I haven't really set up my shop yet either. I have been working for about a year to see what I need and where it is best for the space, build it once hopefully . Thaks for tsking the time out to make this
Thanks! Yeah I can see how it would be tricky to retrofit into an existing bench, that’s probably a downside of this tailvise style. But I’m sure it can be done if you want to!
I watched the whole video in one sitting. It was wonderful. I am going to be building a work bench for myself, it will probably be my last as I’m 70 and retired. I will be using some of your ideas and techniques. I am especially encouraged in using mostly non electric hand tools. I have the top which is 100 year old solid hard maple 30” x 72” x 3” which used to be a butchers cutting table. I’m getting a Sjoberg bench vise for the front, and already have my grandfathers tail vise. I would like to make the base out of yellow pine, and will be using your technique of joining it to the top. Thanks for taking the time to make the video.
Fantastic job Gillis. Well worth the wait. I love the way you work… very honest with no ego. A true craftsman who does not depend on power tools to create fine work.
I absolutely enjoyed watching you work on this bench. It's very refreshing to see you using mostly hand tools to create such a great piece! You are quite talented and I could serve as a great inspiration to young woodworkers. You are carrying on a craft that is usually practiced by folks with a few *ahem* decades under their belts! Well done, sir! Thank you for taking the time post the video. I look forward to seeing more of your work.... just subscribed!
I think it's not a torture to watch your video until the end, you did a lot of work for this bench and also do make the video 🎉 I'm glad to see your skills growing up 💪
I really appreciate the thorough analysis of what you like and dislike about the old bench. I’ve been thinking about making a more traditional joiner’s bench, and now I plan to first do a similar hard look at what I like/don’t like about my current bench so that the new one will work exactly as I want it to. Thanks!
loved this video. very cool to see the little things you do (like using a clamp to precision fit the long stretchers during assembly) that could help me
Your tape trick is brilliant. You're the first I've seen use it. Now it'll be a part of my practice. Thanks Gillis! Also the first time I've seen your channel.
What an awesome build! I've been looking for ideas for my next bench and you gave me some great ideas. As always, your thoughtful execution and skills are simply amazing.
@@GillisBjork Now, after watching the whole video (which by the way is not to lang ;-) ) I can say: You gave me some inspirations for my build, which will happen this autumn. Thanks a lot.
Wow, nice bench! You make me want to build a bench too. I am still using the mangy one I made 30 years ago from a solid core door. Don't drill holdfast holes until you need them, a lesson I learned long ago.
@@GillisBjork I can appreciate the gloves. I don't have a workshop, so my workbench is outside and has to be broken down when rain comes, so vises are not practical. I'm following your advise and converting to holdfast (Gramercy) Thanks for the video. (oh, and it will be 113 degrees in a couple of hours - I do project up to 108 then I quit for the day. Again great work - I'm subscribed and love watching your videos.
Glad I found this. Your skill is amazing and your interest in old school woodworking is inspiring. I subscribed and will be looking at everything else you put in RUclips. Thanks for taking the extra time to make videos of your fine work. .
You, young man, are a very talented woodworker. I was totally impressed with your skills. This is the first video of yours that I have seen, and I believe I’ll be busy for the next month watching your other videos and projects. I really enjoyed watching you work, thank you. Texas
Great video 👏👏👏 As a professional woodworker for 40+ years and now on RUclips. I commend you on your build. I wasn't entirely sure about your build but you did great. Onle one thing that I would have tried to talk you out of... Beech. I'm not a fan of it on larger pieces of work. It is the most unstable of timbers and is known for movement if the moisture/humidity levels change. Alf Martensson in his book The Woodworkers Bible, has it on a chart as the worst timber for movement. And due to it being right next to your dogs I hope it doesn't play you up too much. Keep it well sealed. I've subscribed too. 👍 Cheers. Jamie
It has been a while since the last video. Glad to see that you are doing well. I made a workbench on wheels 2 years ago because I also have a small space in my garage for a shop. Usually when the weather is good, I roll it out on the driveway. Those Gramercy hold fasts are great. I made Stumpy Nubs saw bench and used them there. So far I have been lazy about making dog holes in my bench. Someday we will both hopefully have our dream shops. Have a great summer and I hope to see your next video soon.
I didn't realize that 40+ minutes had already passed. Could you make the next video a little longer? 😊I'll watch this another time. Very fine bench you did.
Well, I just found your channel, but as an aspiring hand tool guy myself, I can confidently say that your work is excellent and you are very talented! I aspire to your level of precision and attention to detail. Keep on working my friend! Greetings from Hungary
The question you want to ask is why they are called bench dogs, dog holes are just where they reside. Dog, Noun. Any of various usually simple mechanical devices (such as an andiron or detent) for holding, gripping or fastening that consist of a spike, bar or hook. Not the current English usage for parking lot buggery.
Hand tool woodworking is not for everyone, but for those that enjoy the quiet, the satisfaction of achievement, the desire to create (with traditional methods), can you reveal how many hours were dedicated to this work? PS: Nice work, beautiful creation.
Thanks for the inspiration, and especially for the advice to make a usable bench before trying to make an ideal one. Congrats on a great video and on your new bench; so glad to see you so happy about it!
I'm glad you found it inspiring! Yeah it felt like an important point to make, I remember how overwhelming all the workbench videos were when I was starting out. Thank you!
Fellow “cat person” (27:45) here, loved the video! Workbench aside, a veritable masterclass on woodworking techniques, coupled with some not-so-basic tips, such as the rationale for the slightly angled dog hole (18:10) or the “bridges” for the router plane (21:10) - both a first for me. (Minor quibble: given the assortment of solid wood species, I hated the plywood at 29:30-30:00.)
Many thanks! Glad you got some tips! Regarding the plywood, I’m not a fan either, but in some applications the alternating grain direction is useful. The parts on the underside of the tailvise get stressed a lot when tightening the vise, and I worried such thin pieces would split if made from solid wood. I might very well be overthinking it, but that’s my reasoning!
@@GillisBjork Yes, I could tell why you did it, still I find it a bit discordant. (I wonder if you could have made your own “plywood” by glueing together two thin pieces of oak with the grain running at right angles.) But this is an insignificant detail that just happened to strike me as odd: overall a great build and an excellent workbench!
Whether I or anyone else agrees with your wood selection, in my opinion, has nothing to do with your build. Your craftsmanship with what you have to work with is excellent. Thanks for another way to look at building a great woodworking bench.
No sawstop, no woodpeckers, just a talented woodworker, great job.
Haha yeah, that would not fit in my workshop or my budget! Gotta make do. Thank you!
I don't think anyone pays for that woodpecker gear😅yay product placement
A true craftsman! A minimum use of power tools!! Excellent bench!!
Finally someone building beautiful workbench without fancy and expensive tools. Thank you 😊
I like old school woodworking
Me too :)
Ripping those slabs by hand. You're a beast.👍
Everything done by hand reminds me of grandfather and father. Thank you.
That was a pleasure you watch.
I built a bench out of 2x4s, 2x6s, and 4x4s, figuring it would be temporary but 40 years later, I was still using it. It was more than adequate. The tail vice used a threaded rod for a screw and a coupling nut but it was hidden inside the wooden parts. You could do that. See Frank Klausz' workbench in Fine Woodworking magazine. Braise the long nut to a big washer and the thread rod never failed. You're doing a great job.
Always a pleasure to watch your videos and best when it’s a long one! Great looking bench
Your videos bring back great memories when I was an apprentice and worked with my father. We used mostly hand powered tools, rip, cross cut and coping saws, planes, chisels, brace and bits, miter box..ect that l would slowly acquire over time. l still have and use a sharpening stone that my Dad used when he was an apprentice, thanks for your great videos and memories.
Glad I could bring back some memories, thanks for sharing!
Excelente veo sus videos desde Colombia y me parecen muy didácticos ,muchas gracias joven por su trabajo magistral ,todo mi respeto
Men, your work and the quality out of it leave me breathless everytime. And speechless :) All the best and keep on having fun and creation 🍀
Many thanks! Will do!
It was great to see a new video, especially one as challenging as this bench. I'm always amazed at your willingness to do all of the complicated and exacting milling and joinery procedures by hand, especially when so many craftsmen are resorting to CNC machines. It's rare that we get to see how furniture was traditionally constructed, and can still be, with hand tools, patience, and attention to detail.
Thank you! I felt a bit bad for using the power planer and circular saw so much here, so I’m glad to hear that you think it still comes across as traditionally handmade!
I agree with Patrick. You’re a true craftsman capable of doing so much of the joinery by hand tools. I’m impressed. Good job, everything was a nice tight fit.
Pure enjoyment watching you hand build the bench. Amazing skill and work!
In a far away land with no electricity lived a man with very sharp tools. Great work.
Thanks Gillis , you've come along way. This bench should last as long as it is used and then some.
Thank you very much! Yeah, hoping I won't have to do this again anytime soon haha
Bravo! That is both a functional workbench as well as a beautiful piece of "furniture".
Many thanks!
With my large delta table saw and an outfeed table and a small secondhand work bench, all in a very small room off the house, I realize I have to adjust my priorities and make some changes. I think the saw needs to go, and I need to make a larger bench as the center point of my work area. I have access to full cabinet shop tools if I ever need to do a massive amount of stock prep, but my small sanctuary should be rearranged to focus on my projects and not my stock prep.
Good call 👍
Dude is a savage with that massive handsaw.. I've never seen anybody on RUclips cut wood with just a handsaw the way he does.. It's refreshing to see a real ols school woodworker at such a young age. I need to practice moe with my handssws. There's definitely a technique. I watch another guy @Wortheffort who uses hand tools most of the time too. He's a bit diffrent b'cos I think he teaches woodworking n college or something but this young guy here is special at his craft.
I've not watched any of his vieos for ages. I will be back now watching as I go out into my shop again..
Beautifully crafted bench my friend
Haha thank you, I'll add "savage" to my resume!
You are an awesome craftsman and artist. I enjoy watching you work on your creations and they are a wonder to behold. Many thanks for sharing them.
Thank you so much for those nice words! I'm happy you enjoyed watching!
I really enjoyed watching your workbench build.
I am an amateur luthier and I have lately been greatly enjoying using Northern European style (E.C. Emmerich and Ulmia) wooden bodied planes and tools and now I would like a traditional workbench with a tail vise and dog holes. My current bench does not have these as I am simply clamping things in place. I greatly appreciate your sharing your thinking / consideration about the build as well as the detailed construction video. Thanks again, I hope you get great service from your beautiful workbench.
Many thanks, glad you liked it! I can imagine this style of bench would work for lutherie!
First time viewer in Sweden. I will take your advice and build a bench I can use. If I reach your skill level I may need another. Very impressive.
Thank you, that sounds great, good luck! You'll be surpassing me in no time!
Great project and execution. Love the commentary as well.
Thank you, that’s nice to hear!
Yes I agree the mix of voice to camera and voice over is excellent. Well balanced 👍
I inherited my father's shop equipment. He had two, one in in the city house, which he built, and one at the family “Semester-Hus”. There were two of most of the machines along with many hand tool, including an almost complete set of metal planes, missing the #1 and #2 and a few specialty planes. So I have two bandsaws, two drill presses, two wood lathes (gave one away), two jigsaws, and multiple routers. All of them in or approaching the antique category. Three sets of carving chisels and a large variety of hand chisels most need sharpening, which brings me to a question…what methods do you use for sharpening? Recently just finished having my shop building insulated so the tools won’t be too hot or cold! Since repositioning equipment and benches I will be building a new base for one of my workbenches your excellent video will definitely be a rewatched video and the bench will incorporate some of your bench features. Will be looking forward to watching more of your videos.
good job man, I totally agree with not building a bench right away, I haven't really set up my shop yet either. I have been working for about a year to see what I need and where it is best for the space, build it once hopefully . Thaks for tsking the time out to make this
Getting better with each video friend, well done
Many thanks!
I’m I’ll in bed, this video was some good medicine. Bravo, an excellent build and equally good recording and explanation of the process. Thank you.
Nice to hear I could provide some medicine! Thank you very much and I hope you'll feel better soon!
Excelente su trabajo joven ,muy motivante y didactico ,mis sinceras felicitaciones usted es un maestro
it's a great job. A long but not boring video. Thanks for sharing.
Thanks a bunch, glad you didn't find it boring!
@@GillisBjork Actually, I was falling asleep at work and your video woke me up 😄 Thanks again
@@animalivaganti360 Haha that's great
Nice job I’ve been wanting to add a wagon vice to my bench. But after watching you maybe I need to build a new bench.
Thanks! Yeah I can see how it would be tricky to retrofit into an existing bench, that’s probably a downside of this tailvise style. But I’m sure it can be done if you want to!
I watched the whole video in one sitting. It was wonderful. I am going to be building a work bench for myself, it will probably be my last as I’m 70 and retired. I will be using some of your ideas and techniques. I am especially encouraged in using mostly non electric hand tools. I have the top which is 100 year old solid hard maple 30” x 72” x 3” which used to be a butchers cutting table. I’m getting a Sjoberg bench vise for the front, and already have my grandfathers tail vise. I would like to make the base out of yellow pine, and will be using your technique of joining it to the top. Thanks for taking the time to make the video.
Thank you, glad I could give some inspiration for your bench! Good luck with the build!
Great looking bench , and the hold downs look like a great upgrade from the last bench
Thank you, yes the holdfasts are huge!
I seldom watch videos this long, but im glad I watched this one. Might watch it again soon too!
Thanks for taking the time!
Fantastic job Gillis. Well worth the wait. I love the way you work… very honest with no ego. A true craftsman who does not depend on power tools to create fine work.
Many thanks! I felt like I did go for power tools a bit much this time, so I'm glad you felt it wasn't too much!
Such a good job. I do like the mix of wood species and how cleverly they're used.
Thank you very much!
Tsa beauty! Just finished the top of my bastardised Moravian today and so shall take a few cues from you for the bottom half. Many thanks.
A thing of beauty! I really appreciated your explanation about the design in the beginning.
@GillisBjork thanks for the lesson. I suggest you try adding locking casters to make your bench easier to move around when necessary.
Daaaaang! 😮 This is an impressive build! Congrats.
Thank you very much!
Try nice job kid. It looks great. Wish you many happy and prosperous years of use.
I absolutely enjoyed watching you work on this bench. It's very refreshing to see you using mostly hand tools to create such a great piece!
You are quite talented and I could serve as a great inspiration to young woodworkers. You are carrying on a craft that is usually practiced by folks with a few *ahem* decades under their belts!
Well done, sir! Thank you for taking the time post the video.
I look forward to seeing more of your work.... just subscribed!
Very nice job. I like the choices you made in the design.
Thank you, glad to hear that!
Thanks for the workbench build, it was enjoyable and relaxing to watch. It's a beautiful bench. Cheers
I think it's not a torture to watch your video until the end, you did a lot of work for this bench and also do make the video 🎉
I'm glad to see your skills growing up 💪
Haha I’m glad it wasn’t torture! Thank you!
I really appreciate the thorough analysis of what you like and dislike about the old bench. I’ve been thinking about making a more traditional joiner’s bench, and now I plan to first do a similar hard look at what I like/don’t like about my current bench so that the new one will work exactly as I want it to. Thanks!
Awesome! Always worth having a proper thinking before enbarking on a big project!
Well done. Thanks for making that video!
loved this video. very cool to see the little things you do (like using a clamp to precision fit the long stretchers during assembly) that could help me
Thank you, glad you found that helpful! I use those quick grip clamps as extra hands a lot.
Your tape trick is brilliant. You're the first I've seen use it. Now it'll be a part of my practice. Thanks Gillis!
Also the first time I've seen your channel.
Glad you found something useful in the video!
What an awesome build! I've been looking for ideas for my next bench and you gave me some great ideas. As always, your thoughtful execution and skills are simply amazing.
Many thanks! Super happy that you got some ideas!
Very nice work. You got me at: There is a whole forest in this bench. ;-)
Haha thank you!
@@GillisBjork Now, after watching the whole video (which by the way is not to lang ;-) ) I can say: You gave me some inspirations for my build, which will happen this autumn. Thanks a lot.
@@klausschleicher523 glad to hear it! Good luck!
Brilliant build! Also, I’m now sold on holdfasts.
Wow, nice bench!
You make me want to build a bench too. I am still using the mangy one I made 30 years ago from a solid core door.
Don't drill holdfast holes until you need them, a lesson I learned long ago.
Thanks! Wow 30 years, that build was a good investment then! Yeah you are probably right about the holdfast holes, do you think I added too many?
If future videos are as good as this one is, don't worry about length. Excellent workbench build and really appreciate the logic behind the decisions.
Thank you so much!
@@GillisBjork I can appreciate the gloves. I don't have a workshop, so my workbench is outside and has to be broken down when rain comes, so vises are not practical. I'm following your advise and converting to holdfast (Gramercy) Thanks for the video. (oh, and it will be 113 degrees in a couple of hours - I do project up to 108 then I quit for the day. Again great work - I'm subscribed and love watching your videos.
Yep, holdfasts would be awesome if you're working without vises!
Glad I found this. Your skill is amazing and your interest in old school woodworking is inspiring. I subscribed and will be looking at everything else you put in RUclips. Thanks for taking the extra time to make videos of your fine work. .
Thats a fantastic bench which will serve you well for many years to come.
Many thanks!
Awesome work! ❤️
Very nice. I hope to see some nice projects build on this bench.
Thanks! They're coming for sure :)
Congrats on the holdfast add! They really are amazing, and so is the bench.
Thank you very much! They are fantastic indeed, don’t know how I lived without them!
Beech is a super-duper choice for the face. That stuff is hard!
My first visit in a long time. Amazing work as usual and wonderful video. That bench will last for centuries!!
Thank you very much!
A very impressive craftsman with good ideas skillfully executed. The bench looks great.
Thank you so much!
You, young man, are a very talented woodworker. I was totally impressed with your skills.
This is the first video of yours that I have seen, and I believe I’ll be busy for the next month watching your other videos and projects. I really enjoyed watching you work, thank you.
Texas
Thanks a bunch!
I have to say. That was a Very good vid!
Your work table came out Gr8!
Thanks for all your work and info.. You just got to Love those DOGS LOL
😇😁
Great video 👏👏👏 As a professional woodworker for 40+ years and now on RUclips. I commend you on your build. I wasn't entirely sure about your build but you did great. Onle one thing that I would have tried to talk you out of... Beech. I'm not a fan of it on larger pieces of work. It is the most unstable of timbers and is known for movement if the moisture/humidity levels change. Alf Martensson in his book The Woodworkers Bible, has it on a chart as the worst timber for movement. And due to it being right next to your dogs I hope it doesn't play you up too much. Keep it well sealed. I've subscribed too. 👍
Cheers. Jamie
please keep keepin' on
Thanks I will!
Wow, what a work ethic top notch results.
Thanks a bunch!
This is awesome mate, given me some very good points and pointers for me current bench and new one. Very impressed with the drawings, fine work
Thank you very much, I'm happy you got some pointers!
It has been a while since the last video. Glad to see that you are doing well. I made a workbench on wheels 2 years ago because I also have a small space in my garage for a shop. Usually when the weather is good, I roll it out on the driveway. Those Gramercy hold fasts are great. I made Stumpy Nubs saw bench and used them there. So far I have been lazy about making dog holes in my bench. Someday we will both hopefully have our dream shops. Have a great summer and I hope to see your next video soon.
It sure has been a while! Sorry about the wait! Sounds like a nice system, I hope you get a lot of good weather then, and thanks!
Lovely project, and a nice video. My only criticism is that there is some sapwood left in the oak.
Nice Bench!
Thank you for the detailed build video. Nice to see sensible use of old and new tools.
Thanks!
Great work ethic and keeping the old technique’s alive.Fabulous bench.
Thank you so much!
Very nice! Looking forward to more from you. Thanks.
Thank you!
I didn't realize that 40+ minutes had already passed. Could you make the next video a little longer? 😊I'll watch this another time. Very fine bench you did.
Haha we'll see, not sure I can stretch the next one out to 40+ unless I get a raid shadow legends sponsorship ;) Glad you enjoyed!
Congratulations on your new bench! The video was well done, and it was a pleasure to watch!
Many thanks!
Great job and super helpful! thanks
Well done, very well done and thank you.
Thanks a bunch!
Perfect Work!...
Good job Gillis. Very inspiring. This is the type iof build i am planning. Thank you.
Your chisel skills are amazing and inspiring. Great video
Very kind! Thank you!
Well, I just found your channel, but as an aspiring hand tool guy myself, I can confidently say that your work is excellent and you are very talented! I aspire to your level of precision and attention to detail.
Keep on working my friend! Greetings from Hungary
Thanks a bunch! Just a matter of putting in the time and getting the practice :)
Beautiful! We shared this video on our homemade tools forum this week 😎
Nice, thanks for sharing!
Very nice work there, fella!
Very well done my man well thought out and executed
So glad I found this channel great build mate 10 out of 10 👍
Amazing build Gil, I actually enjoy the long form videos
Thank you, happy to hear that!
Absolutely beautiful. Glad I came across your channel
With time, you will become an excellent master carpenter. Cheers
Haha time will tell I guess, thank you!
Such a nice build! - congrats on your new bench 🙏🏼
Thanks Gillis, fantastic build and great explanation of why and how!
Thank you very much!
The question you want to ask is why they are called bench dogs, dog holes are just where they reside.
Dog, Noun. Any of various usually simple mechanical devices (such as an andiron or detent) for holding, gripping or fastening that consist of a spike, bar or hook.
Not the current English usage for parking lot buggery.
Nicely done, thanks.
Thank you!
What can I say, super build. Alway enjoy your videos, keep them coming .
Happy to hear that! Many thanks!
Hand tool woodworking is not for everyone, but for those that enjoy the quiet, the satisfaction of achievement, the desire to create (with traditional methods), can you reveal how many hours were dedicated to this work?
PS: Nice work, beautiful creation.
Very true and thanks! I didn't count so I can only estimate, but somewhere in the 250-300 hours range I think.
@@GillisBjork wow, a lot more than I guessed. Thanks
Thanks for the inspiration, and especially for the advice to make a usable bench before trying to make an ideal one.
Congrats on a great video and on your new bench; so glad to see you so happy about it!
I'm glad you found it inspiring! Yeah it felt like an important point to make, I remember how overwhelming all the workbench videos were when I was starting out. Thank you!
Fellow “cat person” (27:45) here, loved the video! Workbench aside, a veritable masterclass on woodworking techniques, coupled with some not-so-basic tips, such as the rationale for the slightly angled dog hole (18:10) or the “bridges” for the router plane (21:10) - both a first for me.
(Minor quibble: given the assortment of solid wood species, I hated the plywood at 29:30-30:00.)
Many thanks! Glad you got some tips! Regarding the plywood, I’m not a fan either, but in some applications the alternating grain direction is useful. The parts on the underside of the tailvise get stressed a lot when tightening the vise, and I worried such thin pieces would split if made from solid wood. I might very well be overthinking it, but that’s my reasoning!
@@GillisBjork Yes, I could tell why you did it, still I find it a bit discordant. (I wonder if you could have made your own “plywood” by glueing together two thin pieces of oak with the grain running at right angles.) But this is an insignificant detail that just happened to strike me as odd: overall a great build and an excellent workbench!
A fascinating viewing experience. Thanks Gillis 👍
Thank you very much!
Very nice! I’m sure your bench will be around for your next generation to enjoy.
Thanks, I really hope so!
Really great bench! Just throw some shims under the legs and it will be sturdy as can be!
Thank you! Yep, that’ll do it!
Excellent and thank you. I think I will make your design this year.