This is just a simple pellet trap inspired by another RUclipsrs video (Link Below) that i have added my own little twist to. • Quick And Not Dirty Pe...
What a great idea. My current outdoor backstop is quite a few electronic catalogs in an amazon box covered in gaffer tape placed in front of a paving slab for good measure. The amazon box is on its last legs now so now I’m being inspired by your backstop idea. Thanks for sharing.
just finished building one using your instructions, including the metal plates (thinner tho) rivetted to the bottom. Since before all I needed to backstop an air rifle was a phone book. Just got a regulated .30 throwing 50 plus grain pellets at around 800fps, so needed to step up my game. and since I live in an apartment with no back yard, and live in a city so paranoid about "guns" that they call the cops on a woman doing a cosplay photoshoot with a ridiculously anime-sized cartoon rifle, I needed something like this to tune and modify without having to make a special appointment (yay covid!) to spend $12 to use a rifle range lane. the spongy mat you suggested really makes the whole thing work a lot better than the "bucket full of cloth strips" I was recommended earlier. Looks almost professional now. I ended up cutting the matting with a big set of very sharp utility shears.
Shears why didn't i think of that it would have made things a lot easier. Glad you found the video so useful and hope you get out with your .30cal soon.
I use a small cardboard box packed with rubber pellets with a 1/2" plywood bottom. Works great for my 1000 FPS pellet rifles. I've never had a pellet go through. US Military Veteran and Patriot
I've made mine very similar to this but your rubber mat is a good addition. I've just put several layers of duct into the recess in the lid but I'm going to get a rubber mat to use next time I have to refresh the lid. Thanks for this idea.
I use cardboard boxes, wrap some jeans around the inner side of the boxes and fill them full of rubber mulch. The stuff works great for stopping lead. I need to make me some of these outside containers. Great video.
Haha this is the very first video I watched from you. Been subscribed for several months now and watched tons of ur videos. Just getting around to make a new/better pellet trap. Also looking for a good entry level PCP that can "grow" with me. What a pain in the rear! O well...keep up the good work buddy, I really enjoy your stuff.
Iv'e been using the smaller granules with great success , regarding the fi crony if you fix a couple of battery led lights to the underside of the diffuser over the sensors it works a treat 👍
Yeah i tried that with little success but then i might have been using the wrong sort of lights, and once i got the FX radar in my hands i used it instead problem solved.
I use a big old book like a old fat yellow pages or a argos catalogue cocooned in gaffer tape , as the years gone by I just keep wrapping it in tape leaving the target cards on in between the layers of tape and its like the gift that keeps on giving weighs a ton now but it does the job lol may have to try this when I eventually replace it 👍
That sounds like a good cheep way of doing it i tried a card board box stuffed with rags and fiberglass insulation but the 30+ft/lb rifles just cut right though it.
I use butyl rubber pond liner for the front of my pellet trap, as it seems to seal quite well (1mm hole for .22 pellets). I'm using leftover bits, but it might be another option.
It rains here in England, so being a cheapskate, I knocked together a plywood box,(£3.00) a bit smaller than a card target, about 16" long, and lay this on the bench in the shed at the bottom of the garden. It's filled with old cycle innertubes (free) and is virtually silent. Result!
@@HuntersVermin After a couple of years of changing bicycle inner tubes on our six well-used bicycles - I live in the Netherlands, see -, I recon I have a box full of them. Tomorrow I am going to mix your idea and that of Summoning Dark and make a sturdy silent target of a plastic box with a fat plywood bottom, rubber matting on top of that, a mix of inner tubes and some rubber granulate in front of that, and a cover with some clothing or a piece of that foam stuff to keep it all in. Target practice in silent mode, here I come!
That's was a really good idea mate I might have to make one or sumthing simpler as I am using wood atm yes wood works but all the rain we get in the uk and leaving it outside soon ruains the wood lol
Yeah the wet weather is the reason i made the trap so i could do a bit of testing indoors were its dry and warmer. And there's plenty of other pellet or bullet trap videos on RUclips to get inspiration from.
Once the center of the lid is shot out, cut out the honeycomb pattern on the lid ( 6:57 ), leaving a rectangular opening / ring. Now when you use up the foam on the exterior, take the lid off, insert a new piece of foam (couple of layers of cardboard, carpet, etc ), and reattach the lid ring to hold the new foam in place. Cheers
Yeah after i had the whole thing done i thought just that, why didn't you just put the foam mat on the inside of the box, but i'll maybe do that on the mk2 model.
MY god David,...one of 'him' is enough hahaha! .....what a time;y video! I was thinking about making a target/trap for some indoor plinking too. I have a 2" thick memory foam mattress topper and was wondering is that, cut into separate pieces and laid on top of each to fill a basket ( we call these , totes ) with layer upon layer of this dense memory foam..should work,..I'll soon find out. This looks like a fine idea. Thank you!
Excellent video and something I now intend to copy as I want something that minimises the sound of the pellet impact when I I'm shooting in the garden Do you have a link to the mat you used as when I've been checking on line they seem to be extremely expensive and I got the impression that the one you used was in a similar price range to the box and mulch? Thanks
@@HuntersVermin Thanks I certainly have tried googling it but all I can find are very very expensive items but will keep trying. In the meantime I have a piece of foam block matting (used in play areas) which I will try. Thanks again for the excellent and informative video.
So im about to make this very pellet trap, is there anything you would change now that its been a good while? Im wanting to make this so i can tune my Redwolf and my Fx M3 in the comfort of my garage, good imformative video.
Glad you found the video so useful, i don't think i would change anything but someone commented instead of just smashing through the plastic lid why not cut the middle away but you'd have to replace it with some thin plywood to stop the rubber mulch falling out so not sure if its off any benefit or not.
@@HuntersVermin well i made your trap and i must say its so damn simply but so useful, and i think i will just keep botching it with duct tape over the rubber mat and not bother sticking plywood or anything until it gives out,and just replace the box because £10 aint gonna break the bank! Its a great idea and the best bit is you can just keep re-using the mulch.
The back metal plate is a good idea but you really don't need it appellate will never travel even halfway through that container you could probably shoot bulletin would not go through the rubber mulch
I got it in Homebase but i can't find it on their website anymore and i can't remember the manufacturers name but if you try looking on amazon for (anti fatigue mat) you'l find plenty of them just make sure you get a big enough one for your box.
There's plenty of seller's on ebay but here's were i got it. www.ebay.co.uk/itm/20kg-Rubber-chippings-sample-for-hen-and-other-livestock-bedding-enclosures/303130829252?hash=item46940161c4:g:bFoAAOSwCfdXocZ4
If the weather will clear up so i can get out on a Saturday to hunt without getting drowned in a down poor or blew off the planet with gusty winds i'll hopefully get some decent footage decoying crows or magpies.
Well its got a lot more holes in it as I've shot a few hundred rounds at it but the rubber floor mate is still holding its own and not letting any of the rubber mulch fall out yet.
Yes you could do that but the rubber mulch is so heavy i don't think the target alone would be able to hole it back especially after you have shot it full of holes.
Expensive but real nice gun and very accurate in FAC with the 18gr JSB and you can tune it to different pellets but i don't like the extendable shroud as the zero changes from when you move it in or out so you tend to leave it in one position all the time. I think if i was doing it again i'd go for the newer crown continuum.
@@HuntersVermin it would still be cheaper than spending 20 quid on rubber and say what 3quid plus on a box and time its a good idea i am not knocking it if you go or know a gun club member you can get off cuts of that rubber stuff that they have for rimfire and centerfire rifles but as for a sub 12ft pounder a simple bit of wood with foam on spray glued onto it stops any bounce back and has something to pin your target on that is what i use to use before i got rid of all mine
Pellets are so expensive I just shoot them into rabbits and feathered vermin, nor of that shooting into a box business, Ulster Scot through and through! Hi David,
Хобби
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
You are one of those people who could make a video on paint drying and I would still watch it 😂 Keep 'em comin'
I second this comment too lol
👍👍👍😜🏴🦄🎣😁✌️
I think i've already done a video on paint drying when DIY painting my gun stock.
Time you got back to those Magpies,good video mate
I wish this weather would clear up so i could.
What a great idea. My current outdoor backstop is quite a few electronic catalogs in an amazon box covered in gaffer tape placed in front of a paving slab for good measure. The amazon box is on its last legs now so now I’m being inspired by your backstop idea. Thanks for sharing.
Thank you very much hope it does you job ok.
Thank you David. As always informative but also entertaining with a nice touch of humour.
I second this comment
👍👍👍😜🏴🦄🎣😁✌️
Thank you very much for that it really makes my day getting comments like yours.
Cracking good job! Thanks for creating and sharing.
just finished building one using your instructions, including the metal plates (thinner tho) rivetted to the bottom. Since before all I needed to backstop an air rifle was a phone book. Just got a regulated .30 throwing 50 plus grain pellets at around 800fps, so needed to step up my game. and since I live in an apartment with no back yard, and live in a city so paranoid about "guns" that they call the cops on a woman doing a cosplay photoshoot with a ridiculously anime-sized cartoon rifle, I needed something like this to tune and modify without having to make a special appointment (yay covid!) to spend $12 to use a rifle range lane. the spongy mat you suggested really makes the whole thing work a lot better than the "bucket full of cloth strips" I was recommended earlier. Looks almost professional now. I ended up cutting the matting with a big set of very sharp utility shears.
Shears why didn't i think of that it would have made things a lot easier. Glad you found the video so useful and hope you get out with your .30cal soon.
Great idea David. Good to see you online again. Hope you and your family are keeping well. Be safe 👍
Yes thank you very much and the same to you and your family.
Well done. That's quite the lathe you have there!
Well its really my fathers lathe as he enjoys wood turning.
I use a small cardboard box packed with rubber pellets with a 1/2" plywood bottom. Works great
for my 1000 FPS pellet rifles. I've never had a pellet go through. US Military Veteran and Patriot
I've made mine very similar to this but your rubber mat is a good addition. I've just put several layers of duct into the recess in the lid but I'm going to get a rubber mat to use next time I have to refresh the lid. Thanks for this idea.
Thanks glad you found it useful.
First Class very well done dave 👍👍
Thank you.
glad to see you doing more projects and how tos again. i hope you do some more game recipe videos too
I leave the cooking to the good wife as last while but if i get some rabbits hopefully in the better i must try something new with them.
Nice one Dave. I've just ordered the rubber mulch. Keep Safe Dave..😷🚰👍ATB Dave.
Thank you, glad you found the video useful.
Brilliant! I'm looking to build a trap and this has given me a redesign... U-turn! 👍 Great video!! 👍
Thanks glad you liked it.
I use cardboard boxes, wrap some jeans around the inner side of the boxes and fill them full of rubber mulch. The stuff works great for stopping lead. I need to make me some of these outside containers. Great video.
Thank you glad you enjoyed it.
sweet ,my next project thankyou and keep up the good work
Your welcome.
Haha this is the very first video I watched from you. Been subscribed for several months now and watched tons of ur videos. Just getting around to make a new/better pellet trap. Also looking for a good entry level PCP that can "grow" with me. What a pain in the rear! O well...keep up the good work buddy, I really enjoy your stuff.
Thanks for subbing! You could have a look at the Airarms s410 plus my local RFD says he sells more KRAL PUNCHER's than anything.
Iv'e been using the smaller granules with great success , regarding the fi crony if you fix a couple of battery led lights to the underside of the diffuser over the sensors it works a treat 👍
Yeah i tried that with little success but then i might have been using the wrong sort of lights, and once i got the FX radar in my hands i used it instead problem solved.
Excellent idea!!!!
Thank you! Cheers!
Great video as always bud.
Thank you.
What a great idea!!!
Glad you think so! i thought it was a brilliant idea when i first saw it.
Well done mate.I used cut offs from roof isolation made from wood “shavings” pressed into plates called pavatex.Realy silent.
Ah i don't think i've worked with that stuff before looks like a very soft MDF no wonder its so silent.
Beautiful rifle great vlog thanks
Thank you very much.
That's a great job sir!!
Thanks sir, i don't think it would last too long with the 9mm though.
@@HuntersVermin lol yea think that might be a bit much
Good job David, we will be doing a lot of backyard plinking at the moment, best to be safe eh!
Yeah i didn't realize how handy this pellet trap was going to be now when i first made it.
Great idea👍
Thank you.
I use a big old book like a old fat yellow pages or a argos catalogue cocooned in gaffer tape , as the years gone by I just keep wrapping it in tape leaving the target cards on in between the layers of tape and its like the gift that keeps on giving weighs a ton now but it does the job lol may have to try this when I eventually replace it 👍
That sounds like a good cheep way of doing it i tried a card board box stuffed with rags and fiberglass insulation but the 30+ft/lb rifles just cut right though it.
Great video I’ll be building one too thank you
Have fun!
Good job 👏. I’ll give it a go 👍
Thank you hope it does your job.
very good, does the job well 👍
Thank you.
A cracking target box I shall be building one for sure
👍👍👍😜🏴🦄🎣😁✌️
Thank you glad you enjoyed it.
great vid more diy please
Thank you and i'll try to do more projects.
Cool Video might have to make one for myself :)
Thanks glad you found it useful.
Great video, thank you.
Thanks for watching.
Good job!
Thanks!
I use butyl rubber pond liner for the front of my pellet trap, as it seems to seal quite well (1mm hole for .22 pellets). I'm using leftover bits, but it might be another option.
I was only missing the zip ties.
Thanks for sharing 👍
Thanks for watching.
It rains here in England, so being a cheapskate, I knocked together a plywood box,(£3.00) a bit smaller than a card target, about 16" long, and lay this on the bench in the shed at the bottom of the garden. It's filled with old cycle innertubes (free) and is virtually silent. Result!
Sounds like a good idea but it must have taken a lot of inertubes.
@@HuntersVermin After a couple of years of changing bicycle inner tubes on our six well-used bicycles - I live in the Netherlands, see -, I recon I have a box full of them.
Tomorrow I am going to mix your idea and that of Summoning Dark and make a sturdy silent target of a plastic box with a fat plywood bottom, rubber matting on top of that, a mix of inner tubes and some rubber granulate in front of that, and a cover with some clothing or a piece of that foam stuff to keep it all in. Target practice in silent mode, here I come!
That's was a really good idea mate I might have to make one or sumthing simpler as I am using wood atm yes wood works but all the rain we get in the uk and leaving it outside soon ruains the wood lol
Yeah the wet weather is the reason i made the trap so i could do a bit of testing indoors were its dry and warmer. And there's plenty of other pellet or bullet trap videos on RUclips to get inspiration from.
@@HuntersVermin yes I have seen a cuple but yours video has more information 👍
Thanks for the information I am going to make one thanks
Thanks glad you found it useful.
looks like it worked well to me
Thank you, i was impressed at how little damage there was to the mat after 200 odd pellets myself.
Like it.
Thanks.
Once the center of the lid is shot out, cut out the honeycomb pattern on the lid ( 6:57 ), leaving a rectangular opening / ring.
Now when you use up the foam on the exterior, take the lid off, insert a new piece of foam
(couple of layers of cardboard, carpet, etc ), and reattach the lid ring to hold the new foam in place. Cheers
Yeah after i had the whole thing done i thought just that, why didn't you just put the foam mat on the inside of the box, but i'll maybe do that on the mk2 model.
Blue Peter, right down to the double sided stick tape.
Ahh you can't have a Blue Peter project without double sided sticky tape.
MY god David,...one of 'him' is enough hahaha! .....what a time;y video! I was thinking about making a target/trap for some indoor plinking too. I have a 2" thick memory foam mattress topper
and was wondering is that, cut into separate pieces and laid on top of each to fill a basket ( we call these , totes ) with layer upon layer of this dense memory foam..should work,..I'll
soon find out.
This looks like a fine idea. Thank you!
Yeah my wife would call them totes as well since she worked in a supper market for a while but i'd be interested to know how the memory foam does.
@@HuntersVermin I'll get to this very soon, or as soon as the weather outside permits me to go shooting again.
Excellent video and something I now intend to copy as I want something that minimises the sound of the pellet impact when I I'm shooting in the garden
Do you have a link to the mat you used as when I've been checking on line they seem to be extremely expensive and I got the impression that the one you used was in a similar price range to the box and mulch? Thanks
I think i got it from Home Base but can't seem to find it on their website but if you look for Anti Fatigue Mat on amazon you'll find similar stuff.
@@HuntersVermin Thanks I certainly have tried googling it but all I can find are very very expensive items but will keep trying. In the meantime I have a piece of foam block matting (used in play areas) which I will try. Thanks again for the excellent and informative video.
So im about to make this very pellet trap, is there anything you would change now that its been a good while? Im wanting to make this so i can tune my Redwolf and my Fx M3 in the comfort of my garage, good imformative video.
Glad you found the video so useful, i don't think i would change anything but someone commented instead of just smashing through the plastic lid why not cut the middle away but you'd have to replace it with some thin plywood to stop the rubber mulch falling out so not sure if its off any benefit or not.
@@HuntersVermin well i made your trap and i must say its so damn simply but so useful, and i think i will just keep botching it with duct tape over the rubber mat and not bother sticking plywood or anything until it gives out,and just replace the box because £10 aint gonna break the bank! Its a great idea and the best bit is you can just keep re-using the mulch.
thinking of you other day i made the pellet holder out of car tube like ur welly boot one
Oh yeah that's going back a bit hay glad you found it useful.
Hello David, do you ever go after rats, would like to see you using your HW 97 on them.
I wish i had a good ratting permission to try the HW97 on but its something i rarely get an opportunity at.
The back metal plate is a good idea but you really don't need it appellate will never travel even halfway through that container you could probably shoot bulletin would not go through the rubber mulch
I'd say your right but having never used the stuff before i thought better safer than sorry as i do intend to use this indoors.
Hello, is there any chance you could leave a link for the rubber mat? Looked for it everywhere and can't find it. Thanks 👍
I got it in Homebase but i can't find it on their website anymore and i can't remember the manufacturers name but if you try looking on amazon for (anti fatigue mat) you'l find plenty of them just make sure you get a big enough one for your box.
Have u got the link for the rubber mulch you bought from ebay so i know im buying the right stuff?
Dont bother mate just use sand better and cheaper
There's plenty of seller's on ebay but here's were i got it.
www.ebay.co.uk/itm/20kg-Rubber-chippings-sample-for-hen-and-other-livestock-bedding-enclosures/303130829252?hash=item46940161c4:g:bFoAAOSwCfdXocZ4
when will the new videos be released?
If the weather will clear up so i can get out on a Saturday to hunt without getting drowned in a down poor or blew off the planet with gusty winds i'll hopefully get some decent footage decoying crows or magpies.
Those holes could be covered with some gasket glue. Maybe it could be repaired once, after few thousand rounds.
A roll of Duck tape would probably help it last a bit longer too.
How does it look now?
Well its got a lot more holes in it as I've shot a few hundred rounds at it but the rubber floor mate is still holding its own and not letting any of the rubber mulch fall out yet.
Why not cut out the recess on the lid then use the lid to clamp the target face in place.
Yes you could do that but the rubber mulch is so heavy i don't think the target alone would be able to hole it back especially after you have shot it full of holes.
@@HuntersVermin The idea is, if the target area is removable then it can be replaced before it becomes unserviceable.
Just use sand mate cheap and better u wouldn't need metal plate
old pc tower works well with a old for sale sign plastic but the rubber filling could be better filling atvb jim
Thanks very much and its surprising how many people have come up with different ways of doing this with what ever materials they have at hand.
Ahhhhh Giles....wonder if he's still flagging youtube channels lol
Got the rubber from ppps 🤣🤣
Yeah i tried them but found i could get it cheaper on ebay and they only seamed interested in selling in 1ton bags.
@@HuntersVermin what do u think of the fx crown was thinking on buying one
Expensive but real nice gun and very accurate in FAC with the 18gr JSB and you can tune it to different pellets but i don't like the extendable shroud as the zero changes from when you move it in or out so you tend to leave it in one position all the time. I think if i was doing it again i'd go for the newer crown continuum.
1:44 1 pound ???????
yes mate, "quid" = Pound sterling.
I am pretty sure he said "eight quid", which is eight pounds. If those were 1 quid, I'd order me twenty of them right now.
or you can go and buy a pellet trap from ebay and save your self some money for 5 quid no messing
True you could do that but i'm not sure how long it would last against a 40ft/lb air rifle at 1m.
@@HuntersVermin it would still be cheaper than spending 20 quid on rubber and say what 3quid plus on a box and time its a good idea i am not knocking it if you go or know a gun club member you can get off cuts of that rubber stuff that they have for rimfire and centerfire rifles but as for a sub 12ft pounder a simple bit of wood with foam on spray glued onto it stops any bounce back and has something to pin your target on that is what i use to use before i got rid of all mine
Pellets are so expensive I just shoot them into rabbits and feathered vermin, nor of that shooting into a box business, Ulster Scot through and through! Hi David,
I too right there ya boy o.
Guess it's all relative, I shoot/practice with pellets because it's a lot cheaper than anything that involves brass, powder, and lead :)
Sounds like your in a cave!! Can't listen.
Sorry about that the workshop is sort of a man cave i suppose.