3D Printer | Homemade - Part 1
HTML-код
- Опубликовано: 11 сен 2024
- Arduino 3D Printer Homemade
In this video, I introduced all Parts that I used to Build my Homemade 3D printer and the Complete Build Process.I have Build this 3D Printer in less than 150$ and have achieved an excellent Print Quality at the Price.You can Buy all the 3D Printer Parts From the Links Below.I have Divided the 3D Printer Build Process into three Parts.I hope You enjoy them all.
Instagram- / shinedjar
Facebook- / rztronics
Twitter - / rztronix
Parts Used:
Aliexpress
Arduino Mega+RAMPS 1.4 Shield+4 x A49AA Stepper Driver-s.click.aliexpr...
5 x NEMA 17 Stepper Motor-
s.click.aliexpr...
E3D Hotend-
s.click.aliexpr...
3 x Endstops-
s.click.aliexpr...
LCD Display(optional)-
s.click.aliexpr...
Heat Bed-
s.click.aliexpr...
240 watt Power supply-
s.click.aliexpr...
PLA Filament (1KG)-
s.click.aliexpr...
OR
PLA Filament (Different Colours)-
s.click.aliexpr...
MK8 Extruder-
s.click.aliexpr...
GT2 Timing Belt+2 x GT2 Pulley-
s.click.aliexpr...
SC8UU Bearings(Replacement for LM8UU Bearings)-
s.click.aliexpr...
5x8mm Couplers-
s.click.aliexpr...
8mm Smooth Rods-
s.click.aliexpr...
Smooth Rod Holder-
s.click.aliexpr...
stepper Motor Mount-
s.click.aliexpr...
Threaded Rod-
s.click.aliexpr...
Angle Brackets-
s.click.aliexpr...
M3 Screws-
s.click.aliexpr...
M3 Nuts-
s.click.aliexpr...
3mm Acrylic sheet
Aluminum Channel for Frame
Amazon
Nema 17 Stepper motor-amzn.to/2F2v8Zy
Ramps 1.4 + A4988 + Arduino Mega-amzn.to/2F4FckO
Endstops-amzn.to/2CvRZee
E3D Hotend-amzn.to/2m3zJCa
240watt Power Supply-amzn.to/2lYZa7E
LCD Display(optional)-amzn.to/2CI8V4K
MK8 Extruder-amzn.to/2AALVzy
HeatBed-amzn.to/2lYT33r
PLA Filament-amzn.to/2Cz1JEu
PLA Filament (Different Colours)-amzn.to/2CxRSik
2 x 5mmx8mm Couplers-amzn.to/2CvADhv
GT2 Timing Belt-amzn.to/2CJWZiN
2 x Lead Screw + Flange Nut -amzn.to/2CvVh15
Smooth Rods-amzn.to/2F4fjBC
Smooth Rod Holder-amzn.to/2F0X6oq
Stepper Motor Mount-amzn.to/2CIfgNj
SC8UU Bearings(Replacement for LM8UU Bearings)-amzn.to/2CxhtrP
Angle Brackets-amzn.to/2Cza0IR
M3 Screws-amzn.to/2Ay5Z5u
M3 Nuts-amzn.to/2qzcjK8
3mm Acrylic sheet
Aluminum Channel for Frame
Music:
Provided by NCS
Kontinuum - Aware [NCS Release]
• Kontinuum - Aware | Tr...
I followed your tutorial and successfully build the printer and its working extremely well. great tutorial. best among other tutorials on the RUclips. Thanks :)
Can you give ne all measurements please ?
how much does it costs for making it
Price?
Hiii....can u give all the measurement ???? Plz....this requirement for our final year project....so plz help me.....
Plz sir
Really almost youtube 3D printing video i seen but this guys are very friendly with their knowledge and you are very hard working. I really impressed with you video, do it that thing we support you.
guys all of the 3d printer base and the top support angles are same length due to fixed smooth rod length
and the rest of the right and left arm dimention are depend on threaded rod
so it means that you need 5 nos - 400mm , 2nos- 440mm or 500mm extrution for this project
Links of AliExpress or amazon are not working
Could I Know The 3D Printer Chassis Dimensions !!?
Did you ever find out the dimensions? Cause I'm over here just comparing/eyeballing it Lol. I fucking hate tutorials that speed past important details.
Ya me2
He is only genious who can make this
Can I get the drawing or the measurement of the body part and etc
is still working? do you have actually your 3d printer?
Nicely done. Only thing that gets me...stepper motors and lead screws should only be 5mm into the couplers
Should have gone for lead screw for the cost difference else welcome to the club.
edit: although now seeing the full video and your budget - you did well to scratch build for $150 !
Thank you, thank you, thank you, for putting out this video! Can't wait for the next ones!
domiflichi is
Bro i needed that! Thank you because my 3d printer is too small for me to make my iphone XS a vr headset
FINALLY!! Thank you!!
Awesome build bro... From the looks of things, folks want plans... Nothing is free, so put them out there for a price...
can you share your measurement
14"
I have a question about this print I can print things that have many colors
I realy love the build but it would have been better if the measurements were mentioned. but I like the effort
links of 3d printer accessories are not openning
Very nice job, not overly-complicated and low cost, thanks for sharing :)
Looking forward to part 2 !
@@GaryMcKinnonUFO total cost?
@@jaikrishnan597 Read the description.
@@GaryMcKinnonUFO bro calculation is tedious and some items price are not available so no price
@@jaikrishnan597 total price would be near 200 - 300 dollars
please reply to this massege
what is the size of aluminium channel
I also need that
You sir are an inspiration for others. Thank you.
Bro, What was the total cost of the products used?
Hello
I have a question :
How Long is The Frame? And how i have to cut The Aluminium ?
I Hope you can answer Me Soon thank you
Java Bro you can use hacksaw blade
For all those who were search ing dimensions you can take any but bigger than 20inch.
Steps uploaded to Arduino are same and take care heat bed placement settings.
The base should be minimum 20×20inch (From base I meant to say the area where heat bed is fixed.) And height should be roughly 25inch(min) .
Acrylic sheet mount should be taken in respect of stepper motors.
That's all rest you can check. In video.
He night not wanted to reveal the lengths or he knew we can take any.
Archit Jakhmola thanks
It's a best you tube channel for 3d printer
What size did you use for the hotend nozzle? And the filament? The product you recomended have several options.
By the way, awesome project!
Hello I was building an 3d printer reference to u r uploaded video and the program of the aurdino I did not found can u please help or guide how to program or can u upload a program
Olá! Você teria o projeto dessa impressora?
its so good to see a hacksaw doing the cutting with a skilled hand all you need is will not money.
What length are all the aluminium channels?Please respond.
Is building a own 3d printer be worth? Or can I buy for that money a better 3d printer without building it self?
Amazing work! congratulations!!!
And Thank You! this videos help a lot to every people. Thank you so much!!
What are the dimensions of the aluminum structure
Plz give measurements of all aluminum parts
Same here bro plz give the measurement bro plzzzzzzzzzzzzzzzzzzzz
hello where can i found the size of frame ?
i dont see the size of aluminum you cut
How are the screws attached directly into alluminium ?? Did you use tap ??
I had used M3 Nuts from the Opposite Sides.
RZtronics How did you insert m3 nuts in mid of alluminium pipe??
I drilled 5mm holes from the other side and inserted Nuts using Tweezers
RZtronics Thanks very much for helping and hope to see next video as soon as possible
RZtronics Hello Whats The size of The Frame ?
Please sir help me.. i have made a 3d printer. When i am testing it the motors are moving only on one direction , I can't move it to opposite direction. Please sir help me
What are the dimensions to build the aluminum structure?
For all those who were search ing dimensions you can take any but bigger than 20inch.
Steps uploaded to Arduino are same and take care heat bed placement settings.
The base should be minimum 20×20inch (From base I meant to say the area where heat bed is fixed.) And height should be roughly 25inch(min) .
Acrylic sheet mount should be taken in respect of stepper motors.
That's all rest you can check. In video.
He night not wanted to reveal the lengths or he knew we can take any.
Hi, I tried this 3D printer for 2 months, and finally completed all. If you still want to know the exact dimensions and scales of all,
ruclips.net/video/ZugkZRZ0j2k/видео.html
it has everything.
Fulrhxggyyldl Schneiderlin
Can i use arduino leonardo?
Pls upload the next video soon ...since I am planning on working with this project cause so far this is the only videos where there is a detailed instruction in making the 3D printer
mel 2027 hello , are you going to build this printer ?
mel 2027 watch my cnc for 60$
if i can use NEMA 14 STEPPER MOTOR in this 3d printer? without any changing????
Brilliant work! Can see you use the full length of the rods, so can work out the dimensions of the base. Could guess the remaining dims but is there any chance of getting a few measurements or a diagram for the rest?
Please help i have 3-6volt nema 17 stepper motor so do i have to change the power supply please reply
Why did you add 2 stepper motors on one specific axis and not one like the other two axisses?
Btw awesome build!
Boris Z axis requires lift on both sides, otherwhise the weigth of the printing head would pull the head lower when the head move to the far end. Lifting on both sides, shares the load and will also keep the X axis aligned. Motors might share the same signal so they move in perfect sync.
Wouldn't a COUNTERWEIGHT be enough? Think to elevators (lifts).
If you have a stronger frame this can be done with one motor. But print carriage moves so the weight is moved around. So if you only have one Z-axis it will need to support the entire weight, and things might bend, so you would need a stronger structure. If stuff bends, it can get stuck, so you can't have a guide rod on the other side. So it's simpler to put two motors to keep all levelled and share the load. Another solution is tho have belts drive both screws at the same time.
So why not making a structure which doesn't bend at all?
Great description
can u send measurement of the alluminuim
Yeah, and what is the total size that it could print?
Having the same issue
@@jonathanlimon7625 i have made in nx if you want the file then i can share it with you
@@mr-retronym can u share measurement of alluminium with me dude?
@@creatime777 sure give me time and i will send you nx file as well as drawing file
the aluminium channel frame that u cut whats dimensions did u take, Is it okey if the dimensions are taken randomly, by changing the dimensions will it affect the g-codes, cause the center axis of extruding end changes.
Hi! I just want to say that this is awesome! Your DIY skills are on a really good level! Keep this amazing work! I subscribed and liked! This video deserves a lot more views and your channel deserves at least 100k subs! Your other videos are amazing too! Good luck in the future!
Best wishes!
Toni
DIYowl suck up
I would like to find out if your compatriot or these engines fit that printer would work what you did on the video you did because I already have atmege and ramps1,4 and electronics and parts I will be grateful for a quick response
Bro, please share code your 3D printer. 🙏🙏🙏
Hi, what are the dimensions of the aluminum frame? Where do I get my plans from?
can i ask about the length of aluminum?
Thank you for the answer
What the length
hi
what are the dimensions of aluminium channels??????
Hello you can use dimensions as per your print size requirements.
k but tell about your dimensions please i'm doing for final year project please bro
So it cost roughly $350-$400? That doesn't seem to bad, and it looks like a nice project. Would you say the print quality is good? Thanks in advance if you reply!
Colin pierce watch my cnc for 60$
I'm planning to build it. It costs me 150$
I bought all parts
please tell me from where you bought the parts?
Can i know why it is showing as `Heating Failed System Stopped` when extruding in ponterface software.
What is the overall cost
$150
Bonjour
J'ai une petite question 🤔
Quelle est la différence entre ces cartes:
Mega 2560 R3
L293D
UNO R3
rampes 1.4
rampes1.5
rampes1.6
Merci
1:45 I love that moment
Yes dud
3D Printer Linear bearings/ Sliding blocks/Shaft Brackets/ Couplings/Handles/ Engraving Machine Press Plates / Manual Screw Jacks/ Lathes Dogs/ Disc Springs/ Screws/ Nuts ...Welcome to MSM Store ""(Your one-stop shop)
Bet you any money ppl disliked the video are 3d printer companies
Or people that actually have a point. This is useless, it's easier and cheaper to buy one
@@connor4317 I looked up good 3d printers, and a 3d printer that matches this quality is 800+ USD. Sure, it's easier, but where's the fun in that!
@@connor4317 if you print dollar store items, then yes this is useless to YOU lol.
Can I use Bigtreetech skr mini E3 V2 in the 3D printer I made myself?
Some Advice: First of all, instead of just zip tying to the bearings, use actual bearing blocks to screw onto, it is the same, but it is more secure and might yield better results on print quality.
Second of all, Arduino is not the best to use for this and I would use an actual motherboard, even an anet a8 motherboard, but I get that it is based on a budget.
Last of all, based on what I see, he is making a Prusa Mendel i3 clone. If you are going to print, make sure that on the stl cutting software, Cura is a great software to use, that you set the machine to Prusa Mendel i3. It will most likely use gcode files to print and if you use the wrong machine it could give you the wrong file and not only that, but it could also throw off your print bed dimensions. Just for reference ;)
EDIT: pls add dimensions, if anybody knows precise dimensions pls reply
damn i can actually fit this in a 7k budget
def gonna try
Bro, please provide the dimensions,that makes the tings important
using math its about 14 inches long assuming his hand is 4 inches which is avg for men. thats from end to end, i didnt bother measuring middle, so a 400mm rod and 2 500mm rods threaded should be good.
saying that this means the build is 12x12 inside, and the outside aluminium being 1x1x14 x2 and 2 pieces being 1x1x12 or so. Hope this helps, my dimensions make the most sense for this build tbh, and is the most logical build dimensions, thought mine aren't exact.
Somesh Sivakumar it should be 22inch
deltagi M thank you so much
H
I am going to make for science project work computation in our school thanks sir
What is Total cost of the project
I replaced all the crappy parts he listed with premium ones and it costed me 247$
and that's from amazon if you get them from ali express it'll cost less
@@muhammadal-hiyari5239 If i were you i get anet a8 with 247$.
But DIY is different, its more funny
@@extrem2497 the quality I got is way better than the anet a8 the heatbed is double the size, the parts are all modular, I can upgrade it to my heart's contempt.
@@extrem2497 not to mension how fun building it is, specially for me I enjoy building more than using it, I remember my first DIY PC my cousin built it, I disassembled it and reassembled it.
Hello. Just want to ask…What is the measurement of the aluminium channel in video u only show the size of aluminum.. u didn’t show how length u cut it
Pls respon😍
YAV SEN ADAMSIN .d
Hello sir,
Congrats for the invention. You did such a great job.
Sir I Just want to ask one question how many types of material can be printed on this printer?
Great abilities in crafting but for the price you spent there's actually complete 3d printer kits available online.
Is there a specific reason to use the arduino mega with ch450? I used a arduino mega with 16u2 chip with ramps 1.4 and my arduino board doesn't work anymore i think it got burnt🤔 why is that? If you know pls let me know😃
Can u list the dimenaion of lenght of the pipe u use to make your frame so I know what to mesure and cut or do u have a diagram I can fallow ? Thank u
Bonjour , j'aime bien tes vidéos...J'ai un problème et je souhaite que vous m'aider..J'ai fabriquer une imprimante 3d chez moi tout va bien au début de l'impression mais après un certain temps l'extrusion du filament (PLA PREMIUM de Hobby King) se stoppe pour un certain temps et puis elle se relance et comma ça j'ai pas pu imprimer un objet complet...J'ai essayer avec plusieurs solutions mais mon problème reste toujours le même. Est ce que la qualité du filament est la cause de mon problème ?
people who are watching this in 2020, back in the day it made sense to make a 3d printer but now you have printers like ender 3 which cost less than the bom of this build, unless you want to make it to learn something i wont recommend to make a 3d printer just buy an ender 3 or an ender 3 v2, they are amazing 3d printers for the price
Sir my pronterface software is saying ...
Error:printer halted : kill( ) called!..
So sir please guid me.....🙏
Bonjour svp vous pouvez m'aider à créer une imprimante de A à Z.si oui les matériels me coûteront combien? Merci
0:34 i dont understand why those cnc/3d printer kit only give 3 limit switch when we need 2 per axis o.0 pls help !!
Yes I wish you'd talked more about what you were doing instead of mouse pointing and dragging.. And god that music.. And dimensions. But a truly inspirational set of videos thanks !!
Is 3d printer is robotics or mechatronics?
nowdays people they just want to know on the idea of designing since most of people whose interested already know and learn the basic concept of operation of this macines...basicly learn about cnc then you got various variant of other equipment like lazer, engraving, 3d printer n even a standard printer many more...
What will happen if i use arduino uno instead of mega?
@rz electronics how much this cost?
Could be used ramp 1.6 instead 1.4?
What is the total cost for home made 3d printer
guys i have a question there's a video i watched who said specifically not to get the 20 teeth GT2 Pulley, and instead get the 16 teeth, so my question is which one is right? go for 20 or 16?
how much does it cost to build
Brother please tell how it it accurate? Does it accurate like company made 3d printer. I have to make it so give answer as soon....
WE Can put the size we want ?? For a biger 3d printer ?
It costs 203$ which is very expensive, we can get a good printer in the range of 150$-200$?
can you mention size of screws and and name of 'L' shaped clamps you used
здравствуйте!
мне интерестно: а можно поменять у испорченного заводского 3Д принтера материнскую плату этими платами? (дело в том что у меня маленький 3Д принтер у которого испортилась материнская плата,экран горит но ничего не показывает и компьютер не видит принтер хотя в панеле задач USB кабель от принтера когда подключён это воспринимает но ни более,я использую кура CURA и всё равно не реагирует и не видеть компьютер принтера.это ради информации чтобы у вас сожилось полная картина что случиось с принтером). и сможете ли вы помочь подобрать плату (пожауйста) для моего 3Д принтера если я вам пришлю фотографии и показатели моего принтера?
спосибо на периот,я буду рад любому ответу от вас! удачи!
How to calibrate 3D printer in pronter face i can't set my dimension 3D printer in pronterface
I found two-steppers, one is 4.2kg-cm at 1.7A and another is 4.2kg-cm at 1.2A. Can you tell me which one to choose?
You can go for any of the two
Height bro I question. How did it work if you want to print large objects? Do it need bigger mother board, component parts and motor to print bigger objects or can you use same printer to print bigger objects as well as small objects?
Can I print larger objects with same mother board and same motor you are using, if I extend the print area and the screw metal rod to provide the nozzle longer area or distance to travel. Can it print larger objects this way?
I think the correct measurements of the aluminum channel is 1 x 1.5 inches :)
I think so.
Total cost of the printer is $134.
Give or take
Do I have to cut specific lengths of aluminium or is at my choice?
Which one should I use "forward" or "reverse" Direction Metal Extruder Kit?
How much you cost for whole setup??
Can we made bigger size 34 inch 3d printer with this method?
Are the stepper motor bipolar?
What is the difference between unipolar and bipolar?