Baja Bug Needs a Skid Plate | Subaru Powered Beetle

Поделиться
HTML-код
  • Опубликовано: 1 окт 2024
  • The Subaru swapped beetle gets a thiccc skid plate to protect the oil pan which hangs down a little low.
    #subaru #volkswagen #subarubug #baja #vwbeetle #vwsubaruswap
    #ej22 #subarulife #beetle #skidplate #lifted #groundclearance #lowprofile #aircooled #vdub

Комментарии • 26

  • @neilmaverick7035
    @neilmaverick7035 6 месяцев назад +56

    From experience
    Put some sides on the skid plate

  • @avocadoarms358
    @avocadoarms358 5 месяцев назад +6

    It’s why the original wrx’s were so raked (sacked at the back and raised at the front) from factory, the engine is actually designed so if you get into a front end collision the motor will drop down and back instead of coming through the firewall

  • @rockharvey5787
    @rockharvey5787 5 месяцев назад +5

    Just put bigger tires in the back for more clearance 😊

  • @fd4639
    @fd4639 5 месяцев назад +4

    Beetles with subaru engines are a nice marriage

  • @Blando7887
    @Blando7887 4 месяца назад +2

    needs a turbo

  • @thelonewrangler1008
    @thelonewrangler1008 4 месяца назад +1

    Just keep a few sticks of epoxy weld and some extra oil in the car, and you'll be golden

  • @TimLeatham
    @TimLeatham 5 месяцев назад +3

    I'm missing Boise there's a much stronger car culture then the east side of the state, cool bug👍

  • @HoldenMaGroin-ne6vv
    @HoldenMaGroin-ne6vv 4 месяца назад +2

    Why no sides tho? Seems like it would be helpful n look nice

  • @Doug-b4p
    @Doug-b4p 4 месяца назад +1

    Does that wrx bolt up to vdub bellowing or do have to use a plate ?

  • @treyreppe4348
    @treyreppe4348 5 месяцев назад +1

    Could you dry sump it eventually?

  • @Gokywildcats11
    @Gokywildcats11 4 месяца назад +1

    Can a subaru motor be made in a dunebuggy

  • @kodamatthews9016
    @kodamatthews9016 5 месяцев назад +3

    stronger is always better, also it lifting with a jack is completely different than being smashed by a rock on landing. not trying to offend but some more structure would probably help,

    • @Kacpa2
      @Kacpa2 4 месяца назад +1

      Yeah welded side wall to the plate at very least.

  • @HooniCoonCustoms
    @HooniCoonCustoms 16 дней назад

    With subaru oil pickup design, i definitely wouldnt want a low profile pan.

  • @kitrussell9358
    @kitrussell9358 5 месяцев назад +1

    Cool skid plate!
    What radiator did you use ?
    I’m building one now

  • @whaaaaaaap
    @whaaaaaaap 3 месяца назад

    I saw this and immediately thought of a Porsche “whale tail” and putting the radiator under it.

  • @bradleehill9662
    @bradleehill9662 5 месяцев назад +1

    Well then never get an i.a.g. oil pan

  • @headstonesandhistory
    @headstonesandhistory 4 месяца назад

    Why not run a bigger vw motor?

  • @tonysurber9111
    @tonysurber9111 5 месяцев назад

    The problem with the low oil pan is that you end up with what amounts to, as a big ugly differential bulge, which is the very thing we try to get away from with an I.F.S. suspension system. And yeah, on my baja/Subaru combo, I went with a custom oil pan. Still isnt perfect, but it's much better.

    • @tonysurber9111
      @tonysurber9111 5 месяцев назад

      Nice skid plate though! Good job.

  • @edgarroman6396
    @edgarroman6396 5 месяцев назад

    How heavy is that plate ?

  • @michaelrogers2368
    @michaelrogers2368 6 месяцев назад +4

    Just curious that we’re concerned about the Subaru oil pan, but we’re driving a Volkswagen Beetle off-roading.

    • @limeylimelime
      @limeylimelime 6 месяцев назад

      it is a subaru swapped bug its a common ish engine swap because both the ej motor and the 1600 dual port are flat 4's

    • @frostedlambs
      @frostedlambs 6 месяцев назад

      It's a point of failure, it's job is to drive off road so obviously making it better at doing it's job is a good thing

    • @michaelrogers2368
      @michaelrogers2368 6 месяцев назад

      @@frostedlambs thank you both for clarifying this point. I was actually further confused by putting the Jack under the new app saying it would hold the load of the rear end, a Subaru engine installed in the customary position on a VW. In spite of himself, Hitler never dreamed of the fun he was potentially giving the world with his invention of “the people’s car”!

  • @bradleyglenn2006
    @bradleyglenn2006 4 месяца назад

    Polish it