I just did a snorkel on my wife's 17' Scrambler 1000. I ordered from Snorkel your ATV and was immediately impressed with the quality. And the instructions we're in color and thurogh. I really couldn't be happier with their kit.
also can to take the hood from the main body off with out removing the snorkels and what rad kit did you use , i have a rdc rad lift that i will be installing , looks to be very little room for the lift to fit on . thx for viewing my inquirey .. ken
Yes, it will work fine, probably better than on my scrambler cause there's more room on the rack to mount it. The rad is the same size as mine. The new High lifter kit is nice to, its a little less angle if you want a lower profile but I believe its more money.
You are right, they come up beside the handlebar pod, I did mine more to get rid of the lines to make room for the cvt and air intake line that come through the same area.
I hooked mine up to the baffles that came with the kit but yes, they run up under the speedo so its just extra insurance, I like the baffles just in case it was to flip over in the water.
michael rhodes it was 1.5” line, I ended up having trouble with blowing belts as it should be a 2” line imo I would either change the intake, exhaust to 2” or add a blower to the line if I was to do another one.
Kaleb Wagner they should be the same kaleb, the only difference between the 850 and 1000 is the bore size, the physical size of the engine and frame is the same on both sizes.
Have you had problems with you cvt exhaust coming off. I have the SYA kit on my 16 Scrambler 1K and every ride my cvt exhaust come loose from the belt housing so I’m always getting wet belts. Any tips on how you made yours stay solid
3666scott How much does it cost snorkel kit in your country? I'm from Poland and I looking chip snorkel kit. You can write on my email addressee: szyja123@interia.eu Or you can find me on Facebook Thank you
Dawid Drewniak I think the kit was around $200, it was a couple years ago, got it off eBay, it was a nice kit but I did have an issue with blowing belts after, the cvt is to restricted with 1.5" pipes, they need to be 2" like the engine snorkel.
I just did a snorkel on my wife's 17' Scrambler 1000. I ordered from Snorkel your ATV and was immediately impressed with the quality. And the instructions we're in color and thurogh. I really couldn't be happier with their kit.
also can to take the hood from the main body off with out removing the snorkels and what rad kit did you use , i have a rdc rad lift that i will be installing , looks to be very little room for the lift to fit on . thx for viewing my inquirey .. ken
how is it for taking off the clutch cover to do some work on the clutches
TriangleATV kits are great. Running on on my 850 Sportsman and I'll most likely run one on my 1000 Scrambler.
Do you have to cut the extra little space on the air box because I didn't get any instructions with mine just curious
great video going to install mine here after winter
Should work on the sportsman 1000 huh just have adjust the plate for risers right?
Yes, it will work fine, probably better than on my scrambler cause there's more room on the rack to mount it. The rad is the same size as mine. The new High lifter kit is nice to, its a little less angle if you want a lower profile but I believe its more money.
how did it hold up after time any problems with it?
It held up fine but I did burn a belt or two before I sold it.
I didn't use my vent lines cuz it looks like they already ran my vent lines up under the speedometer or am I wrong ?
You are right, they come up beside the handlebar pod, I did mine more to get rid of the lines to make room for the cvt and air intake line that come through the same area.
I hooked mine up to the baffles that came with the kit but yes, they run up under the speedo so its just extra insurance, I like the baffles just in case it was to flip over in the water.
Do you know the size of clutch exhaust boot you used
michael rhodes it was 1.5” line, I ended up having trouble with blowing belts as it should be a 2” line imo I would either change the intake, exhaust to 2” or add a blower to the line if I was to do another one.
Is the kit generally set up the same on the 850 Scramblers?
Kaleb Wagner they should be the same kaleb, the only difference between the 850 and 1000 is the bore size, the physical size of the engine and frame is the same on both sizes.
Have you had problems with you cvt exhaust coming off. I have the SYA kit on my 16 Scrambler 1K and every ride my cvt exhaust come loose from the belt housing so I’m always getting wet belts. Any tips on how you made yours stay solid
how much????
What are the dimensions of the pipe
??
Dawid Drewniak it's 2" for the engine and 1.5" on the cvt, the cvt is not big enough, ended up blowing belts from overheating, go with at least 2"
3666scott How much does it cost snorkel kit in your country? I'm from Poland and I looking chip snorkel kit. You can write on my email addressee: szyja123@interia.eu
Or you can find me on Facebook
Thank you
Dawid Drewniak I think the kit was around $200, it was a couple years ago, got it off eBay, it was a nice kit but I did have an issue with blowing belts after, the cvt is to restricted with 1.5" pipes, they need to be 2" like the engine snorkel.
3666scott thank you for help 😁 I try find snorkel kit on ebay 😜