This was awesome! Thanks for posting. Good to know that power button isn't needed to avoid reboot and that top board only doesn't cause temp warning. Also, cool to see the diag process without any line names present. Killer job as always!
I have a 12 mini witch draws 0a when off and 120mA when I powder it on. The screen stays off and the current stays at 120ma, drops to 80ma then to 0ma, goes back up to 120ma and repeats. What could that mean/ where do you recommend I start to diagnose it? The current measurements were taken directly on the battery connector. It draws 0ma over the USB
what is the history of the device? dropped or water damaged? The amp draws just give some small indicator of what to check, it is not a full proof method for figuring out what the problem is. What that amp draws kind of tells me is that the phone wants to turn on but something is preventing it. That means most of the power rails should be turning on. If it were me, I would try to measure all the power rails (nand, cpu, vram, etc) to see if one is missing. It can also possibly just be a sandwich board issue. Who knows. I never really know until I start working on it.
Awesome video great display of skills and knowledge! My question if you would be so kind to answer is what do you think the problem would most likely be if my 12 mini was on the charger plugged in, overheated, then now is completely dead, no power, no charging, no detection by computer. When this happened the battery health was severely degraded like 67% but no signs of water damage or anything when I opened it up. What are the chances that if I fix the battery and screen that it works? Or what would be your guess that caused it to overheat on the charger and completely fry? Lol could it be the ic? Thanks ahead of time and I did give you the much deserved like on the video!
Thanks for the like! Not a great chance that it is the battery, but you cannot tell until you try and start the diagnosis process. You most likely have some motherboard problem like in this video.
hey dude i have a question, i have a 12 mini that keeps searching for signal and also doesnt let me activate wifi. any idea what that may be ? also says the iphone is locked to user when i reset it. but i previously had my icloud info on it
This was awesome! Thanks for posting. Good to know that power button isn't needed to avoid reboot and that top board only doesn't cause temp warning. Also, cool to see the diag process without any line names present. Killer job as always!
Thanks for the support bro!
Thanks dear Aaron amazing work buddy ! Keep the flow going
Thanks, will do!
I have a 12 mini witch draws 0a when off and 120mA when I powder it on. The screen stays off and the current stays at 120ma, drops to 80ma then to 0ma, goes back up to 120ma and repeats.
What could that mean/ where do you recommend I start to diagnose it?
The current measurements were taken directly on the battery connector. It draws 0ma over the USB
what is the history of the device? dropped or water damaged? The amp draws just give some small indicator of what to check, it is not a full proof method for figuring out what the problem is. What that amp draws kind of tells me is that the phone wants to turn on but something is preventing it. That means most of the power rails should be turning on. If it were me, I would try to measure all the power rails (nand, cpu, vram, etc) to see if one is missing. It can also possibly just be a sandwich board issue. Who knows. I never really know until I start working on it.
Sir I have a question ..?
How can we repair 14 pro max green screen with jumper please tell me
How much would you charge ? For water damage on iphone12 mini
Was it a CAN of Rosin spray? Please mention.
It is just canned air turned upside down
@@iBoardRepair woww
Awesome video great display of skills and knowledge! My question if you would be so kind to answer is what do you think the problem would most likely be if my 12 mini was on the charger plugged in, overheated, then now is completely dead, no power, no charging, no detection by computer. When this happened the battery health was severely degraded like 67% but no signs of water damage or anything when I opened it up. What are the chances that if I fix the battery and screen that it works? Or what would be your guess that caused it to overheat on the charger and completely fry? Lol could it be the ic? Thanks ahead of time and I did give you the much deserved like on the video!
Thanks for the like! Not a great chance that it is the battery, but you cannot tell until you try and start the diagnosis process. You most likely have some motherboard problem like in this video.
hey dude i have a question, i have a 12 mini that keeps searching for signal and also doesnt let me activate wifi. any idea what that may be ? also says the iphone is locked to user when i reset it. but i previously had my icloud info on it
It is a problem with the interposer or "sandwich"
I want to contact you for repair training
What's your website / contact info for repair services
It is in the video description
Good channel, have my subscribe man
Thank you for your support!
Thanks💯💯💯💯✍️✍️
My iphone 12 mini is dead without any damage no dents no scratch no liquid damage and dead after 20days of new purchase
You should at least be covered by warranty.
facing the same issue rn
Awesome, looks fun actually 🧐
It IS fun!
Когда он начал снимать плёнку с платы, я начал что-то подозревать, но на 10 минуте видно, что он рукожоп
Lol its a high heat shield. Its safer to just pull them off when I am only concerned with data recovery and don't much care about a working phone.
nice skill😅
Indian