Looking to start a Street Bob video build series in the near future. Thanks to this video, I think I just found my risers. Thanks for brining OG Moto to my attention.
Great review! I have all the parts and ready to install on my 2020 street bob. Did you do an install video? Do you need to de-pin and of the wiring? The Moto bars look like they will pass right through. Thanks! Mike.
@barrybarnes96 all good guys. Been involved in The Five Dirty Bikers Podcast. Which takes a lot of my free time. You all can check us out we are available on all podcast sites and drop new ones every Monday.
All good guys thanks for asking. I have been doing The Five Dirty Bikers Podcast. Which takes up most of my free time. Check us out we drop a new podcast every Monday. It's a lot of fun and not for kids😂🤣.
Hey Tony we need to meet up for a ride. I am open most of the time so just let me know. Total miles is 81 miles from Milan Indiana to Louisville. About Half way is Madison Indiana. Just let me know what you think?
Tony- awesome content! I just received my OG risers and ODI handlebars and I’m about to install. Question: Do I need to disconnect the battery during installation?
Hello, I am the manufacturer of LED headlights and like your video. I really want to have a cooperation with you. I have sent you the message via Instagram. Looking forward to your reply.
Looking to start a Street Bob video build series in the near future. Thanks to this video, I think I just found my risers. Thanks for brining OG Moto to my attention.
Looking at same set up, would love to see an install video. Thanks for posting.
I just ordered myself a set for my incoming FXBBS 2021. Thank you for the discount code.
Best Regards Daniel from Sweden
👊👊👊
This is an awesome video. This is exactly what I was looking for. There are very few options for keeping things this clean looking. Thanks! 🤘🏽
i bought these a few months ago. they are the best!!!!!!!! Great choice!!!!! OG all the way!!!! I have the mini floorboards coming this monday.
Quality stuff👊👊
Love the channel Tony been following your lead for a while! Veteran Biker here
Thanks man👊👊. Really appreciate that thanks for watching.
@@TonysGarage appreciate any feedback you may have for my channel
God damn those look badass! The quality is impressive!
Hey Tony, more looks of the bike from a bit further away would be great, cheers!
👊👊. I got you
Found your channel from 5 dirty bikers love all you guys do!
Thanks man👊👊👊
Just ordered from OG Garage Moto. Thank you for the video and the discount code.
Great stuff👊👊👊👊
@@TonysGarage Tony, what riser bushing do you have?
With the 8.5 did you have to extend wires and cables?
This was awesome video there’s not a lot on streetbobs.
Hey neighbor, you’re gonna have a totally new bike before this is over!
Wish I could have seen more of the bars while in use riding.
It’s coming soon
Great review! I have all the parts and ready to install on my 2020 street bob. Did you do an install video? Do you need to de-pin and of the wiring? The Moto bars look like they will pass right through. Thanks! Mike.
can you take a few pics of your bike with these bars and risers without that bag in the way? from a few different angles ...thank you sir
What been happening Tony , Haven't heard from you in While , Hope all... well
Yeah it's strange ...he just stopped posting videos. Hopefully he;s okay.
@barrybarnes96 all good guys. Been involved in The Five Dirty Bikers Podcast. Which takes a lot of my free time. You all can check us out we are available on all podcast sites and drop new ones every Monday.
All good guys thanks for asking. I have been doing The Five Dirty Bikers Podcast. Which takes up most of my free time. Check us out we drop a new podcast every Monday. It's a lot of fun and not for kids😂🤣.
Hi Tony. I haven't seen a new video from you in nearly a year. Everything OK ?
Do you have the link to the website?
They look great 👍🏻
what is the pull seize
Do you think you would have enough slack to go to the 10” riser ? I’ve got the same bike looking to do the 10”
I think so except for the speedometer
@@TonysGarageI’ll be getting the extention cluster cable.
@@TonysGaragehow tall are you ? I went with the same setup. 8.5 og risers. And the taller v twin bars. You have the taller rise bars or the low ones ?
Awesome brother.
T bars are for teabagger baggers. Good video Mr. Cox. 🤣
That are risers and moto bars not T bars🤣😂. It’s just a shame their not on a Dyna.
nice! is the discount code still active? I'm ordering pretty soon...
Hey nice bike ! What wind screen do you got on ?
Memphis shades road warrior
They look so good perfect fit 👍🏻🇦🇺
👊👊
Odi bars ?
Yes sir
@@TonysGarage just finished mine and they came out really nice
Tony how you been
How you doing Tony!
Hey Tony we need to meet up for a ride. I am open most of the time so just let me know.
Total miles is 81 miles from Milan Indiana to Louisville.
About Half way is Madison Indiana. Just let me know what you think?
How tall overall?
About 12 inches
Any more videos coming soon?
Yes, I have a bunch in the pipeline
did you have to change the cables?
Nope, stock worked just fine
Tony- awesome content! I just received my OG risers and ODI handlebars and I’m about to install. Question: Do I need to disconnect the battery during installation?
Also, did you have to Depin the wires to take them through the handlebar?
I did have to Depin.
Thanks for your quick response!
Just bought these risers. What size is the moto bars?
Promo code expire?
looks great
Resembles Thrashin Supply parts
Wish they had them without the pull back
Love the bars, risers and display where you put it. How tall are you? And did you do the install yourself? Video?
I did do the install. It was pretty straight forward. Unfortunately I didn’t film it.
@@TonysGarage How tall are you?
5’6
Looks great ! Are the handlebars from Original Garage Moto or elsewhere? If elsewhere, where and which ones? Thanks Tony.
They are ODI but original garage carries them.
What length did you go with for the speedo extension wire
I’m thinking it a 6 inches over stock.
Okay thanks I was trying get an idea bc I might go with the 10.5 riser so I might go with the 9 inches over stock to be safe
What was the stock high ?
About an inch lower 12 inches I think.
What was the overall height ? Thanks !
12 inches
@@TonysGarage
Awesome . Thank you .
How tall are you?
5’6
Hey mate what hight are you ?
5’6
Did you end up pairing the OG moto bars with the 8.5 riser or did you find other moto bars to pair with the riser?
Thanks
ODI bars with the 8.5 riser
@@TonysGarage much appreciated 🤙
Will you be making a follow up review video any time soon?
Been few months since you installed these, are they still confortable?
Best setup I have ever used.
Oh Canada!!!!!!!
How tall are you sir?
Can u please give me and adress to order from?
Are those tears in your eyes
Man, thought I edited that’s out😂🤣
That bike's too pretty for you...
It is isn’t it🤣😂
those bars look pretty cool. Nice review fanboy LMAO
🤣😂
hi can you send me parts number..for all the parts in lreland love your set up going to go with your setup
Hello, I am the manufacturer of LED headlights and like your video. I really want to have a cooperation with you. I have sent you the message via Instagram. Looking forward to your reply.
I currently work with Custom Dynamics, but would definitely take a look at what you have to offer.
@@TonysGarage I have send the message to your Instagram. Do I need to send it to your email?
Please not seeing it in Instagram
@@TonysGarage please check it again. Sent message via instagram again just now.
How tall are you ?
How tall are you sir?
5'6
What bushings did you use
Arlen Ness