Nice review,got the same amp and crossover as in video,got a Whaferdale Delta x21b double bassbin 1600w rms x 2,want to connect not overrating the subs,what will be the best way to connect?
Good day. I bought a 2nd hand b1800. When I switch it on I hear n slight modulating 60hz freq. I know these are not sq amps but I just want to know If yours has that slight wine. The noise is there constantly with only the amp and speakers connected without signal. It is also the only powered device that is on at the time
Help! For about 30 years I have been using a Technics se-m100 power amp in my studio. I am a professional songwriter/producer. Recently, the relays in this amp have become faulty, and I'm struggling to find replacements. Any ideas?
So I have Hybrid A4000 amplifier, whenever I add bass volume up to experience bass punch,it comes with Limiter (red light),who can I solve this so that I can full range of bass.Your help Will be highly appreciated.
18H800 the perfect things is to know how to connect those things. Don't forget to put inside of the speaker the IMIX Professional Cross Over - XO-S1 or another one
@@lazziemunetsi1498 I believe only their smaller installation amps are full Class D (such as the PA500M, IA200/IA400 as well as their powered mixers and speakers), however I would recommend at least going for one of the Peavey IPR2 or Crown XLS 2 units, or at very least, an IMG Stage Line STA-D amp, if you want a Class D that will last, while delivering crystal sound
@@defaultyotis_x7528 hi. Do you think the crown xls 2502 would be strong enough to pound my jbl jrx 215 or jbl prx415 speakers? Would it make it sound better than the hybrid amps that I'm currently using? I do use a soundcraft UI mixer.
thanks, i am going to be doing audio videos next month. I will try to add the one you asked for. The PC control is with their other amp, i dont have that amp at the moment.
HI I HAVE A HYBRID A1600 I NEED USER MAUAL OR ADVICE WRT CONNECTIONS BRIDGED/STEREO/PARALLEL, AND IF THERE ARE ANY OUTPUT TESTS TESTS I CAN DO TO MAKE SURE OUTPUT VOLUMES ARE LEVEL, THIS PARTACULAR MODEL HAS 8 MICRO SWITCHES AT THE BACK WHICH NEED TO BE SET FOR VARIUS SETUPS. THANKS
cross over is about R800, audio interface ranges from R800 upwards. Personally i dont use the M-audio one shown in video, endless issues with it. Even my Behringer UM2 is more stable. I have videos on the audio interface M-audio showing the issues.
those speakers are your entry level units. Mostly people rate them is low end speakers. If possible try get Hybrid+. The speakers that have the + are decent.
I just took a gander at the damping factor on the spec list. For a class D amplifier the numbers dont add up. I think its under spec, the whole amplifier. I wish someone would verify the data on this amplifier.
Your gain staging procedure is not optimised to provide the maximum dynamic range and signal to noise ratio through the system. Those two rotary control knobs on the amplifier's front panel are not volume controls, but input sensitivity controls ment attenuate and match the output level of the sound source with the nominal sensitivity operating level of the amplifier. With a correct system gain structure, the input sensitivity controls of the amplifier will never have to be turned up more than the 12 o'clock position. I highly recommend the use of a mixer in front of the amplifier, to control and monitor the signal level on the mixer's master output level meters. With properly setup gain procedure, the mixer and the amplifier should reach clipping point at the same time. To maximise the system dynamic range and ensure the best signal to noise ratio at the amplifier input stage, your sound source output level is set to maximum (unclipped) output level. On the amplifier side, for full rated power output, you start with the input sensitivity controls at full attenuation (turned down fully counter clockwise) and slowly raise them up until the clip indicators start to flash and then turn them down about 3 dB. This way, you take full advantage of the source maximum dynamic range and ensure the best signal to noise ratio (no hiss between tracks). The overall volume level of the system is controlled by source volume controls. If your speakers continous power rating is lower than the continous power rating of the amplifier at the nominal impedance, you calculate the power ratio between the amplifier and the speakers and adjust either the source output volume or the amplifier input sensitivity controls down, for the calculated attenuation.
this makes me wanna watch more of you videos
Hello! How do you Feel? Something didn't understand well. On parallel section, u can use Channel A only for Stereo and channel B to the Bass Bin?
Hi can u please make a video or explain more on how temperature display works and what to watch out for.
Can I be able to connect many speakers on this hybrid B4000 amplifier?
Nice review,got the same amp and crossover as in video,got a Whaferdale Delta x21b double bassbin 1600w rms x 2,want to connect not overrating the subs,what will be the best way to connect?
Good day. I bought a 2nd hand b1800. When I switch it on I hear n slight modulating 60hz freq. I know these are not sq amps but I just want to know If yours has that slight wine. The noise is there constantly with only the amp and speakers connected without signal. It is also the only powered device that is on at the time
Help!
For about 30 years I have been using a Technics se-m100 power amp in my studio. I am a professional songwriter/producer.
Recently, the relays in this amp have become faulty, and I'm struggling to find replacements.
Any ideas?
Do I need two amplifiers to power up two 18 inch 600 watts woofers and two 200 watts mid speakers
Well explain good job Keep safe.
So I have Hybrid A4000 amplifier, whenever I add bass volume up to experience bass punch,it comes with Limiter (red light),who can I solve this so that I can full range of bass.Your help Will be highly appreciated.
Good day! Nice video I've enjoyed but my question is "what size of Hybrid speakers can be connected to this Hybrid B4000?"
any size under 600W RMS
The hybride 18H600
18H800 the perfect things is to know how to connect those things. Don't forget to put inside of the speaker the IMIX Professional Cross Over - XO-S1 or another one
Excellent video, can you now show the connecting mixture, cx223 and amp all hybrid
Hey there B16 hybrid amplifier can take how many tops 15 and the bass bin
Is it wise to connect 2 dual hybrid + bassbin rated at 2000w rms on this amp, does it have enough power to push those speakers?
What interface are you using
How many tops 15" speaker and the bass bin
Good day is it possible to use these power amps in a hifi setting using a hifi preamp like a Rotel?
Nice video very informative and why are most Hybrid Amps heavy (>15kg) as compared to other brands like Yamaha or Crown?
its a good thing, it means big transformer and strong case. For class A and B amps they heavy
@@ecologicaltime Ok cool, but do we have any high efficient Hybrid Class D amplifiers at the moment?
@@lazziemunetsi1498 not yet class D they still uses class H
@@lazziemunetsi1498 I believe only their smaller installation amps are full Class D (such as the PA500M, IA200/IA400 as well as their powered mixers and speakers), however I would recommend at least going for one of the Peavey IPR2 or Crown XLS 2 units, or at very least, an IMG Stage Line STA-D amp, if you want a Class D that will last, while delivering crystal sound
@@defaultyotis_x7528 hi. Do you think the crown xls 2502 would be strong enough to pound my jbl jrx 215 or jbl prx415 speakers? Would it make it sound better than the hybrid amps that I'm currently using? I do use a soundcraft UI mixer.
Hie l have got hybrid b1800 l want to know the speakers l can use tops and bass watts
Great great review!
Hi can you please do a walk thru of hybrid PC control setup,I can't find it anywhere on the internet,also the built in crossover
thanks, i am going to be doing audio videos next month. I will try to add the one you asked for. The PC control is with their other amp, i dont have that amp at the moment.
@@ecologicaltime ok sir, thanks,I did jus purchased one and it's confusing,they don't even have manuals on the internet. Mine is a Hybrid A4000 mk5
thank you bro this will come in really handy next time when i get my setup arrived
HI I HAVE A HYBRID A1600 I NEED USER MAUAL OR ADVICE WRT CONNECTIONS BRIDGED/STEREO/PARALLEL, AND IF THERE ARE ANY OUTPUT TESTS TESTS I CAN DO TO MAKE SURE OUTPUT VOLUMES ARE LEVEL, THIS PARTACULAR MODEL HAS 8 MICRO SWITCHES AT THE BACK WHICH NEED TO BE SET FOR VARIUS SETUPS. THANKS
Is this a class d amplifier?
And I want to know also how many speakers that hybrid B1600 it can carry ? Because I have 2 15"600wats, and 4 15"350wats
it can take them all
B 1600 IS STABLE AT 4OHMS IT PUSH OUT ABOUT 700 ,450 AT 8 0HMS
Hey man good vid what would a similar setup cost same X-over and audio interface.
cross over is about R800, audio interface ranges from R800 upwards. Personally i dont use the M-audio one shown in video, endless issues with it. Even my Behringer UM2 is more stable. I have videos on the audio interface M-audio showing the issues.
@@ecologicaltime thanx im asking cause i was thinking of getting the new hybrid B1800+B4000 etc. But didnt get the chance to check out prices yet.
I need fix mine where I can get place to fix them
Onde posso adquirir um igual?
Hi Can this one copite with the old B4000 and A4000 interns of reliability?
So far its been fine.
Brilliant!
Good day well put video, thanks.Please rate Hybrid party box 15 , is that a good product to buy.
those speakers are your entry level units. Mostly people rate them is low end speakers. If possible try get Hybrid+. The speakers that have the + are decent.
Still waiting for the demo 🥺🥺
make a how to install 2 way light switch video pls
I could do a on the desk setup maybe?
Hi. Not to be funny... but if you want 101% perfect stuff. Pay for that 101% item. Dont badmouth hybrid. They make great stuff. Just saying
how much you purchase sir?
i think R6000
the spec list is way out..do they just put numbers in..misleading if you ask me.
why do you say that, i thought its accurate.
I just took a gander at the damping factor on the spec list. For a class D amplifier the numbers dont add up. I think its under spec, the whole amplifier. I wish someone would verify the data on this amplifier.
@@jeremyphilander8833did you test it
Can you please help me with default password for hybrid A2400 amplifier.
please contact Viva Afrika
Your gain staging procedure is not optimised to provide the maximum dynamic range and signal to noise ratio through the system.
Those two rotary control knobs on the amplifier's front panel are not volume controls, but input sensitivity controls ment attenuate and match the output level of the sound source with the nominal sensitivity operating level of the amplifier.
With a correct system gain structure, the input sensitivity controls of the amplifier will never have to be turned up more than the 12 o'clock position.
I highly recommend the use of a mixer in front of the amplifier, to control and monitor the signal level on the mixer's master output level meters. With properly setup gain procedure, the mixer and the amplifier should reach clipping point at the same time.
To maximise the system dynamic range and ensure the best signal to noise ratio at the amplifier input stage, your sound source output level is set to maximum (unclipped) output level. On the amplifier side, for full rated power output, you start with the input sensitivity controls at full attenuation (turned down fully counter clockwise) and slowly raise them up until the clip indicators start to flash and then turn them down about 3 dB.
This way, you take full advantage of the source maximum dynamic range and ensure the best signal to noise ratio (no hiss between tracks).
The overall volume level of the system is controlled by source volume controls.
If your speakers continous power rating is lower than the continous power rating of the amplifier at the nominal impedance, you calculate the power ratio between the amplifier and the speakers and adjust either the source output volume or the amplifier input sensitivity controls down, for the calculated attenuation.
I have 3 hybrid 15 and b2400 yesterday bunt my twitter how use hybrid correct with 15