Excellent concept, not so excellent execution. I am guessing you didn't show cutting of any bushes because the travel of the blades isn't long enough to cut? It doesn't look like they open and close enough to cut anything maybe just vibrate the branches off?
I've used an electric B & D trimmer for years. It's been a workhorse but I no longer am, and wanted to make my job easier. ruclips.net/user/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG Around the corners, the small side yard etc. was a pain to run the cord out to, so I bought this thinking I'd use it for touch-ups and hard to reach places. Well, I haven't used the corded one since!This is so light weight and so much easier. It has all the power I need because I start wearing down after about 20 minutes and I haven't run out of battery yet. It takes about two hours to charge. I've used it about twice a week for a month and still have line left too. My favorite feature is the blade inside the shield that keeps the line trim to where I don't even have to think about it. You can see from my pic that it's been heavily used and I probably should clean it more often. Very happy with it.
creative..but are you sure it is really working?? It looks too fast to capture plant branch and cut it.... and the plate doesnt seem to have sharp edge. You need to show a little demo of this.
I find your invention interesting. I followed your instructions carefully. However I am unable to understand the mechanism where the angle grinder is connected to the blades that cuts. Can you be kind to share the measurements. What causes the forward and backward movement. Are these the two washer? I have done everything except the connection between the grinder and cutting blades.
The main mechanism for reciprocating of blade is the cam fitted in the angle grinder. Since the cam is elliptical or something like that hence it push and pull the cutting blade having a hole whithin it to accomodate the cam creating a linear to and fro movement when grinder rotates. Thanks for watching bro.
@@youngdiy489 Thanks for your response. What is the thickness in mm is the cam? Are there two pieces of cam fitted on the angle grinder? Should the cam be the same size as the holes on the cutting blades? Can you share the measurements of the holes on the cutting blades and cam. Your response and guidance will be appreciated.
no va a cortar, debido a que la holgura es muy pequeña, necesariamente deberia de hacer que las cuchillas se crucen para poder cortar, en el video no llegan ni a la mitad
Wouldn't it be easier and greener to simply take a busted one out of a dumpster and fix it up.. Its usually onlt the diaphragm or pump bulb or fuel lines that literally cost the price of a sandwich And easy step guides on here how to stip and fit..! Use the Internet for something that benefits you and others... They get the views you get to fix something so it's like new.. And some small parts part manufacturer gets a little something.. Win win win
Meri hath jod kr request h ye cheej mt bnaiye aaj hi esi machine se chot lg gyi stich aaye h hath pr .. so pls dont make this kind of ..isse betr nya khrid le bt esa jugad na bnaye
I'm guessing it didn't work as to why there was no actual demonstration ! It's great that other people are going to find out they wasted their time just like watching this damn click bait video !
Excellent concept, not so excellent execution. I am guessing you didn't show cutting of any bushes because the travel of the blades isn't long enough to cut? It doesn't look like they open and close enough to cut anything maybe just vibrate the branches off?
I've used an electric B & D trimmer for years. It's been a workhorse but I no longer am, and wanted to make my job easier. ruclips.net/user/postUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG Around the corners, the small side yard etc. was a pain to run the cord out to, so I bought this thinking I'd use it for touch-ups and hard to reach places. Well, I haven't used the corded one since!This is so light weight and so much easier. It has all the power I need because I start wearing down after about 20 minutes and I haven't run out of battery yet. It takes about two hours to charge. I've used it about twice a week for a month and still have line left too. My favorite feature is the blade inside the shield that keeps the line trim to where I don't even have to think about it. You can see from my pic that it's been heavily used and I probably should clean it more often. Very happy with it.
Everything you made is just wonderful. One thing i want to ask why smoke come out in video 09:12 min? and you should show trimming some plant.
The friction is too great it's burning the grease.
Wow that’s a great trimmer well done👏😀
creative..but are you sure it is really working?? It looks too fast to capture plant branch and cut it.... and the plate doesnt seem to have sharp edge. You need to show a little demo of this.
70% ok It is Short play, not drumming. Used barring that fine.
What are you doing with thing,.?
I find your invention interesting. I followed your instructions carefully. However I am unable to understand the mechanism where the angle grinder is connected to the blades that cuts. Can you be kind to share the measurements. What causes the forward and backward movement. Are these the two washer? I have done everything except the connection between the grinder and cutting blades.
The main mechanism for reciprocating of blade is the cam fitted in the angle grinder. Since the cam is elliptical or something like that hence it push and pull the cutting blade having a hole whithin it to accomodate the cam creating a linear to and fro movement when grinder rotates. Thanks for watching bro.
@@youngdiy489 Thanks for your response. What is the thickness in mm is the cam? Are there two pieces of cam fitted on the angle grinder? Should the cam be the same size as the holes on the cutting blades? Can you share the measurements of the holes on the cutting blades and cam. Your response and guidance will be appreciated.
@@prittchibole9429 its a piece junk...best to go to garage sale a buy a real trimmer for $3.. or a new one for $30...
You guys are both morons lol absolute morons....
Felicitaciones amigo saludo desde Colombia 🇨🇴 buen video era presisame el video que buscaba para la poda de unos pinos gracias sigue subiendo 👍
Si
no va a cortar, debido a que la holgura es muy pequeña, necesariamente deberia de hacer que las cuchillas se crucen para poder cortar, en el video no llegan ni a la mitad
and the smoke that escapes at 9:10 is just a bonus :)
8)
Its for special effects 😅
Τέλεια η μετατροπή από τροχός σε κοπτικο για θάμνους .
This is why i love U TUBE
Hedge cuter ki blade angel grinder me kese fit kare vidio bheje
why didnt you demonstrate its use out in the bush......
because it was made so badly it would most likely not cut...and if it did it would not work very well or for long imo...
Finally i made it and succesfully not work.. hahaha
You don't try to cut plants
nice, I subbed to you, finally something i can also try. does the commercial one like BosXX also use that mechanism? (ellipse joint)
Will not work
Does come with warranty?
После пяти минут работы с такой хренью ,руки будут трястись весь день как этот аппарат
Super
Bahaya
for what.?
Atleast you should show the practical use of it.
J.PALMURUGAN (Signal) Tambaram (East) S. Railway (Helper) Tech I.....Super .......
Wouldn't it be easier and greener to simply take a busted one out of a dumpster and fix it up.. Its usually onlt the diaphragm or pump bulb or fuel lines that literally cost the price of a sandwich
And easy step guides on here how to stip and fit..!
Use the Internet for something that benefits you and others...
They get the views you get to fix something so it's like new.. And some small parts part manufacturer gets a little something..
Win win win
8:00
Работает сообразилка . Классно .
I want to buy
그라인더는회전운동을하는데!연결했다고어찌직선운동이돼는지?
J
O
À
O
Halo bhai purchase knife hai yes machine
D. C
جيد
Que palhaçada....tanta gambiarra mas não mostrou a ferramenta executando nenhum servico pra mostrar que realmente funciona...😡.
Gostei 👍
Pp
trust me! it wont cut anything! the shear space is too much! please i dare u to show us u cut something !
Meri hath jod kr request h ye cheej mt bnaiye aaj hi esi machine se chot lg gyi stich aaye h hath pr .. so pls dont make this kind of ..isse betr nya khrid le bt esa jugad na bnaye
3:45
I'm guessing it didn't work as to why there was no actual demonstration ! It's great that other people are going to find out they wasted their time just like watching this damn click bait video !
он не правильно сделал он не кчему не полезный стал
뭐할때쓰는건가요?
Apparently it's just for looking at .....from a safe distance !
most dangerous diy so far
What a fool to mow this mower, it sumashedshiy
muito bom abraços
😁😁😁
실패
Hahahaha you take the comedy too far hahahaha to far.
péssimo não demonstrou nada ZERO
素
This how he had done cuts nothing, teeths made wrong way, spaces between them too big. Idea is good but not practical.
Бла че это было не понятный
0
सबको च्युतया बनाओ. पहले वर्किंग दिखाओ
He's the fool ! He knows it doesn't work but also doesn't want to tell the truth ! Desperate for clicks
mickey mouse...
رمعاخ
رحگهمظ
Co kurwa?
Лжижри
This so awful 😢
Useless..,
This is so poorly constructed and dangerous just watch the washers bouncing around etc.
Please no one try and make this 😬