Это видео недоступно.
Сожалеем об этом.
Assembly Tutorial for SunFounder Raspberry Pi AI Robot Car Kit - PiCar-X
HTML-код
- Опубликовано: 6 июл 2020
- The unboxing and assembly tutorial for the SunFounder Raspberry Pi AI Robot Car Kit - PiCar-X. PiCar-X is an AI self-driving robot car for Raspberry Pi, on which RPi works as the control center. The mounted camera module, ultrasonic module, line tracking module can separately realize the functions of color detection, face detection, automatic obstacle avoidance, automatic line tracking, etc.
For the code download: github.com/sun...
Just follow this tutorial to assemble the PiCar-X. Welcome to subscribe for more interesting videos and leave comments about your thoughts. For any questions, welcome to post on our FORUM www.sunfounder.com/forum.
This is completely confusing. I have a PiCar-X. First, the car built here has the Raspberry Pi backwards (USB/ethernet pointed to the center of the car) compared to the drawings in the assembly fold sheet (pointed towards the back). Second, the servos do nothing when plugged into P11 - I read 5V between the yellow and red pins, but nothing happens to them. This is not a well documented kit, and given the videos here, the inconsistency is major problem. Is there a forum somewhere to get help?
10:05 This should be in the manual with this level of detail. Nevertheless, thanks for providing this video. I didn't quite understand how to zero out the servos when I was putting the PiCar-X together, so now I'll have to try and do it after it is fully assembled.
This means that the servo needs to be at 0 degrees before installing it on the car.
If the angle is not correct, when the steering gear is set to 0 when the car is started, the steering gear will be stuck.
Generally speaking, before uploading any program, after powering on the robot hat, you can plug the servo into the p11 pin, and the default program will reset the servo to 0 degree.
If you upload other programs, this default program will lose its effect, or for some unknown reason, this program does not work. You can manually upload a code that sets the servo angle to 0.
Enter the block programming interface --> click picar-x in the list --> select the block that sets the servo angle (at the bottom) --> click and drag after finding it and place it in the Forever --> click "Falsh".
(Note: If you only supply power to the Raspberry Pi via usb, the servo cannot be driven. You need to power the robot hat through the battery and turn on the switch on the robot hat)
im trying to do it but i have a different model
wonderfully assembled
Your hand is hiding everything 😢😢😢😢😢😢😢😢😢
nice
Please give the code without ezblock. Only play with python.
We are facing some issues on text to speech and lane detection algorithms
I didn't calibrate my servos but I already built the whole car, what do I do?
why is the raspberry pi OS saying it cant fetch the data? i just downloaded the one from your website with the ezblock. pls help
How to stop servo camera
Does the camera use Open CV ?
Yes, it uses Open CV.
Do a video of starting it up
Can you do a detailed video on just connecting the circuits to the robot hat ?
I need a video so I can know where to make my connections.
Do I have to do things first with the rasberry pi before I play? Can you do a video on that too
Can i use this for autonomous drive using ANN
Yes, this little car can do simple autopilot with ANN, though we don't offer support for that.
does it work on phone
assembled it it didnt work.... found out the batteries im using are dead XD spent a hour trouble shooting dead batteries
I am willing to buy the kit for my final project can i get codes and circuit diagrams for that, Where i can get those
I'm sorry, but the circuits are currently closed to the public.
Hello, I have a problem with the sound amplifier, it does not produce any sound even after doing what is said in the manual. Can you help me please?
Hi KeldeLink,
A short video or some pictures of the issues could be much more helpful.Please send to our official email: service@sunfounder.com
Our staff will contact you later to help with that.
I am able to run the code for LED and Text to speech, but the motors are just not moving. move.py runs and terminates but the motors do not rotate. How can I check if the motor drivers are working?
Make sure all required environments are installed:
docs.sunfounder.com/projects/picar-x/en/latest/download_and_run_code.html
There is no abnormality when running the program, and the robot hat is powered by the battery instead of the Raspberry Pi usb power supply. If it still cannot be solved, please provide detailed instructions and contact us at support@sunfounder.com with the order number.
the model you use is different that the real model
I will ask the technical department to answer your question tomorrow morning. Because it is midnight in China now, I am very sorry that I cannot solve your problem immediately.
@@sunfoundermakereducation8590 thanks
@@sunfoundermakereducation8590 This is not a question but a statement
How do i connect this through manfully ??
its not connecting automatically.
Make sure to burn the ezblock special image: ezblock.cc/download/v3.html
In addition, the app version needs to be version 3.0.
When will this be available ?
Hi, you can buy it on our site: store.sunfounder.com/products/picar-x?_pos=1&_sid=8d65b199c&_ss=r
Does it teach you how to program the car?
Hi, Rony, as like our other kits or robots, Picar-X also has a detailed tutorial, you may download it on our website, www.sunfounder.com/learn/category/tutorial-picar-x.html
Or from our Github, github.com/sunfounder/picar-x
@@sunfoundermakereducation8590
Needs more information
Can i use this for autonomous drive using ANN
What should be done, when the servo callibration faild on P11? I did it like in your video, but nothing happend to the servos,
Do you have some Hints for me? Thx :D
If the servo is not automatically calibrated, burn a program to set the steering gear angle to 0 degrees.
@@sunfoundermakereducation8590 Thx!! I'll try it, All the best!
@@sunfoundermakereducation8590 How would one proceed to burn a program? This is a Raspberry Pi, or is there another microcontroller such as an Arduino on the hat?
@@davedurkee8853 Hi Dave,please contact us at service@sunfounder.com
i am planning to oder it
will i get customer support if i need any help ?
Yes, you can definitely get our professional technical support. You can get help by emailing service@sunfounder.com or our forum forum.sunfounder.com.
Yes, we're always here, if you need any help, please contact us: service@sunfounder.com, thank you.
does it come with batterys i cant find mine
The battery needs to be equipped separately. You can buy it at a local hardware store or at an Amazon store.
@@sunfoundermakereducation8590 can you send me a link for these battery please ?
@@keldelink971 For related information about the battery, you can check this link: docs.sunfounder.com/projects/picar-x/en/latest/battery/battery.html#about-the-battery
You can buy it at a local hardware store or at an Amazon store.
hey when i try to connect my picar-x to my phone it wont let me connect it it sais that my picar-x is offline and i dont know how to connect it to my hpone so please tell me how to do it please
1. First make sure that the battery power is sufficient. Because sometimes when the battery is too low, it will not be able to connect to the bluetooth.
2. Confirm whether the network environment is good, whether it is in the same local area network, enter the quick wifi configuration process for the first connection, and whether the input network name and password are correct and consistent with the current WIFI.
3. Confirm when the EzBlock image was burned, and try to re-burn the latest version of the image. 1drv.ms/u/s!AqKAi6T8L7jzkFSRlpZ3C3fAfVzP
4. Make sure that the SD card has the latest version of the EzBlock image burned correctly. Because the wrong image is burned, the WIFI will not be connected.
5. Do you directly connect to the APP as soon as you turn on the robot switch?
Because the robot is turned on, but the Raspberry Pi has not been fully powered on, you will fail to connect at this time. When turning on the robot switch, wait for the Bluetooth indicator to be bright before connecting.
Is the bluetooth light brighter or darker when you connect?
Because the connection will fail when it is dark.
If it still doesn't solve your problem, please provide a screenshot and send it to support@sunfounder.com.
@@sunfoundermakereducation8590 how long does it take to charge the batterys
@@thegreenskull Regarding the charging time of the battery, it is recommended that you try to test it yourself.
There is no standard time for battery charging, because it is related to the capacity of the battery. The larger the capacity, the longer the charging time, which is also related to the use time of the battery.
@@sunfoundermakereducation8590 ok so i charge the batterys and it still wont let me connect it to my phone
and i dont know what to do
but do i have to sing in for it to work
Are these 18650 batteries INR or ICR types of batteries?
It is recommended to use INR type batteries.
@@sunfoundermakereducation8590 Thanks for answer :)
@@sunfoundermakereducation8590 do you have a link or a reference to buy this batteries ?
SunFounder, does this PiCar-X have information to use the newer Raspberry Pi--5? 🫤 The RPi-5 GPIOs require different coding than the RPi-4.
Which SunFounder kit is the best way to go to use the newer Raspberry Pi-5 GPIO pins and OpenCV camera coding??? Thank you.
@@qzorn4440 Hi, We have upgraded the PiCar-X to be compatible with the Raspberry Pi 5. The current version fully supports the Raspberry Pi 5's GPIO pins and OpenCV camera coding. If you have any further questions, feel free to reach out!
@@qzorn4440 www.sunfounder.com/collections/best-selling-products/products/picar-x?ref=tiktok1&
@@sunfoundermakereducation8590 Thank you and are there some RPi5 videos for this project?
@@sunfoundermakereducation8590 Thank you and this is just what I have been looking for to learn the newer RPi5. 🤸
@@sunfoundermakereducation8590 I cannot find the PiCar-X RPi-FIVE GPIO video. I need this before buying the car.
Circuit diagram of this?
For more information about the car, please see this link: docs.sunfounder.com/projects/picar-x/en/latest/
when is there an assembly for the picrawler?
About picrawler assembe, please check this link docs.sunfounder.com/projects/pi-crawler/en/latest/list_and_assembly.html
@@sunfoundermakereducation8590 will there be a video for it?
@@zayankhan3930 There will be. Stay tuned.
How price it costs
It was around 120 + USA dollars for me