ARRMA FELONY 6S BODY MODS HAVE STARTED! THE WAY IT SHOULD HAVE BEEN....

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024
  • Welcome back everyone,, as I had mentioned in some earlier videos I wasn't to keen on some sections of the felony body... In this video we start to address the body mods!, and boy do I like where this is headed! Stay tuned for more body mods coming down the pipeline...
    hope you enjoy the video,, stay safe, stay healthy.. Catch ya on the next one...

Комментарии • 416

  • @MacSide01
    @MacSide01 4 года назад +23

    Dude, are you a witch? A magician? Whatever, I want that mod! I'm blown away and back. Pls sell these!

    • @camaroboy383
      @camaroboy383  4 года назад +14

      🤣🤣🤣🤣... Thank you sir! This may be a kit in the near future..😎.. I will for sure keep everyone posted..👍.. I appreciate you checking it out and for the subby.. 😎.. more to come soon my friend, stay tuned!😉

    • @johnnybanana8004
      @johnnybanana8004 4 года назад +5

      @@camaroboy383 will i have a chance to get one of these? i live in switzerland. i would offer you 250 bucks for 2of them, including the cost of shiping it to switzerland.

    • @camaroboy383
      @camaroboy383  4 года назад +1

      @@johnnybanana8004 thank you sir! Appreciate the kind words and the sub my friend..👍.. I hope to have it all figured out soon..
      Just have to get through the cad on the other parts.. once everything is said and done, I will keep everyone posted as to if/when they will be available..
      Really do appreciate all the interest in the tail pan..✌

    • @johnnybanana8004
      @johnnybanana8004 4 года назад +2

      @@camaroboy383 thank you for the quick respond, yes just post a vid when you ar ready to sell it and ship it then we can proceed.
      i wish you a grate day

    • @larryfreeman5593
      @larryfreeman5593 3 года назад +2

      Can you offer a kit?and please quote me a price will pay in at advance 🙂

  • @WhiteEagleMichigan
    @WhiteEagleMichigan 4 года назад +15

    You might as well get a price point set and let us know when they are available. Nice work.

    • @camaroboy383
      @camaroboy383  4 года назад +2

      🤣🤣🤣🤣..I know right.... there has definitely been quite the positive response.. 🤣🤣.. appreciate you checking it out...✌

    • @ewinghubbard
      @ewinghubbard 3 года назад

      Have you made any body mods you wanna sell ???

    • @rc_trucker5130
      @rc_trucker5130 3 года назад +1

      Ditto......I want it! How much?

  • @andreacost441
    @andreacost441 2 года назад +1

    I remember when you got your first RC !! Great job on these videos and happy to see this amazing hobby of yours turn into a passion!! So proud of you brother!!

  • @Captinfun101
    @Captinfun101 3 года назад +2

    That’s a much more satisfying rear end for the felony nice job. One thing I would do is a chrome fuel filler cap

  • @towgod5959
    @towgod5959 4 года назад +1

    I got up early cruising thru you tube saw this and was amazed.... Instantly subscribed... You are incredible, you made what everyone could just invision !!

    • @camaroboy383
      @camaroboy383  4 года назад +1

      I appreciate the kind words my friend...✌.. this project is alot of fun, and I'm happy I can share it with all of you..😎.. I plan to take care of those with and without 3d printers.. just have to get through all the cad on the other parts..👍
      Thanks for the sub as well dude.. appreciate you! ✌

  • @michigancody467
    @michigancody467 3 года назад +1

    There should be hundreds of more likes. Great video man!!!!

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Thanks, appreciate you stopping in to check it out, and comment..👍

    • @michigancody467
      @michigancody467 3 года назад +1

      @@camaroboy383 no problem. Happy to help your algorithm. 😁

  • @bradd145
    @bradd145 3 года назад +1

    Great work. Ordered my Felony last week. Definitely should do a kit.

  • @KC_2112
    @KC_2112 3 года назад +1

    Take my money right now GODDAMN that’s nice and how it should’ve looked in the first place. Great job

    • @camaroboy383
      @camaroboy383  3 года назад +1

      🤣🤣.. thank you sir, appreciate you checking it out..👍.. it definitely rounds out the body especially with the front air dam I designed..
      People have enjoyed them for sure.. 👍

  • @tat2man68
    @tat2man68 3 года назад +1

    This is Awesome , this is the way it should've been. you definitely knocked this out of the park. please keep us posted , i would love to purchase one from you.

    • @camaroboy383
      @camaroboy383  3 года назад

      The update video was posted recently with links to the parts..👍
      Appreciate you stopping in to check it out, and thank you for the kind words..🙏

  • @venosanchez6263
    @venosanchez6263 4 года назад +2

    RC masterpiece. Please I've gotta get these awesome mods. Im buying!! Please start selling. Keep us posted Rc Master

    • @camaroboy383
      @camaroboy383  3 года назад

      Thank you for the support my friend..🙏

  • @rcpd3157
    @rcpd3157 4 года назад +1

    Jesus christ, that came out great! Great job! I know you said you was doing that but I had know clue it could look that much better!

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thanks, appreciate that for sure.. glad you like it, its gained quite the positive response which is nice..👍..

    • @rcpd3157
      @rcpd3157 4 года назад +1

      @@camaroboy383 That's because you do amazing work! Again, GREAT JOB! Can't wait to see what else you come up with!

  • @navbes
    @navbes 4 года назад +1

    awesome work dude! big difference between stock and your creation, really beautiful !!!

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thank you my friend! I'm definitely loving it, and cant wait for the other parts to be done..😎. Many many hours of designing and prototyping...😱.. huge thanks to you for your support since I started this channel..😎✌..

    • @navbes
      @navbes 4 года назад +1

      @@camaroboy383 you're welcome. Great work ! ✌

  • @rmessenger23
    @rmessenger23 2 года назад +1

    Looks awesome. The original design is for air flow cooling. How is performance, heat etc with the new rear? If it's negligible I want one

    • @camaroboy383
      @camaroboy383  2 года назад

      Thanks man... I'm not sure what the intent of the opening in the body was all about... Only Jason can answer that..
      No additional heat problems because of the tail pan, 100's of them out there at this point and no mention of it, and I have not found an increase in under body temps while testing either..
      The firma 150's have plenty of heat issues on Thier own.. The tail pan seems to have added no I'll effects on top of the ones that were already present..
      Now that I sorted that with my fan mounts and some fans I can run 23/47, body on, tail pan mounted, beating the death out of it and no thermals..👍
      Previous to the heat correction I was running a 20/47, body off, and it would thermal in less than 5 mins..🤦
      Sorry for the rant, anyway, because these were so sought after I'm in the process of tooling up to vacuum form these and the front air dams.. it will help keep costs down for the end user.. 👍..

  • @KaizerTest
    @KaizerTest 4 года назад +4

    Your gonna make some money bro with those skills and equipment you have. Looks amazing!!😮

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thanks brother, much appreciated..I'm definitely loving the look.. I think the front air damn will be next on the chopping block...👍

  • @stephenwroblinski5329
    @stephenwroblinski5329 4 года назад +1

    Kick ass man!! It came out dope. There nothing you can't do. When you set your mind to it brother very impressive.

    • @camaroboy383
      @camaroboy383  4 года назад

      Thanks brother! Means alot.. ✌

  • @troyfleming534
    @troyfleming534 3 года назад +1

    Simple Amazing work. Congrats!!

    • @camaroboy383
      @camaroboy383  3 года назад

      Thank you for checking it out..greatly appreciated..✌

  • @HardcoreRC
    @HardcoreRC 4 года назад +1

    I am in awe of your CAD abilities, wish i had such skillz - great work 👍👍

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thank you sir.. I really really appreciate that.. I'm not going to lie, this was a daunting task.. but so worth it my friend! 😎

    • @HardcoreRC
      @HardcoreRC 4 года назад +1

      @@camaroboy383 looks sweet as, its a great job thats for sure

  • @marksmith5569
    @marksmith5569 2 года назад +1

    Great craftsmanship. That build bring the Felony to life. It makes the Felony complete. Please if you be so kind to share your ebay link so I can purchase one when available. Thanks. Again excellent creation.

    • @camaroboy383
      @camaroboy383  2 года назад +1

      Thank you very much, I appreciate that, and I appreciate you taking the time to check it out...
      I'm currently making moulds and plugs to vacuum form these when I'm feeling ok.. Health has been a rollercoaster for a while now.. The 3d printed air dam and tail pan are great!, So many people were happy with Thiers over the past year.. I've shipped so many I've lost track, they really are popular..
      The issue with the 3d printed parts though is they do break if the rig is crashed, so I've set out on the vacuum forming adventure...So we can all enjoy the cool parts while having something far more durable.. 👍..
      I am still printing the parts if people ask and really want them, but I do encourage them to wait a little longer to see if I can pull off the vacuum forming

    • @marksmith5569
      @marksmith5569 2 года назад +1

      @@camaroboy383 Thanks for your quick response. I pray your health gets better. I'll be patiently waiting for the vacuum forming. I know you can do it. Keep up the great work.

  • @paulysmalls5177
    @paulysmalls5177 4 года назад +1

    Dude you the man!!!!! Love how you showed each step on how you made it. The lights are so badass. I liked the finger snap but what happened to all the thumbs up buddy lol

    • @camaroboy383
      @camaroboy383  4 года назад

      Thanks brother..loving the look of it for sure...Dammit, I knew I forgot something.. 🤣🤣.. the famous random thumbs up...👍🤣🤣👍..

  • @stevesullivan4536
    @stevesullivan4536 4 года назад +1

    Amazing. Subscribed as soon as I saw your work.

    • @camaroboy383
      @camaroboy383  4 года назад

      Appreciate that sir..😎✌ thanks for the support..👍

  • @kevinAPapaof2
    @kevinAPapaof2 4 года назад +1

    Good job haven’t bought my felony just yet but when I do I hope you will be selling these.

  • @scalebuildersguild
    @scalebuildersguild 4 года назад +1

    Great job!

    • @camaroboy383
      @camaroboy383  4 года назад

      Thank you sir...👍...means alot coming from you..✌..appreciate you taking the time to check it out..👊...

  • @BarstoneRC
    @BarstoneRC 4 года назад +1

    Man that thing looks sick, you did an excellent job on that bud. Definitely looks way way better!!

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thanks brother dj.. really do appreciate you my friend, you have always been a big support on my channel and I cant thank you enough.. your channel is growing exponentially and it's well deserved my friend..✌

    • @BarstoneRC
      @BarstoneRC 4 года назад +1

      @@camaroboy383 thanks bud I really appreciate that man! It’s been fun and I’m surprised how quickly it is growing. But I always enjoy your videos and you do great work man anything I can ever help you with let me know. I’m getting some stickers made up I’m excited about that.

  • @Basherqueen
    @Basherqueen 3 года назад +2

    OMG ... that rear end looks just EPIC ! 👍👍👍 Wow, nice nice made. 😘 from the Basherqueen!

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Thank you Kimberly for the kind words.. appreciate you stopping in to check it out...✌

  • @donslick8464
    @donslick8464 Год назад +1

    That was badass. Great job!

    • @camaroboy383
      @camaroboy383  Год назад

      Thank you sir.. greatly appreciate that..🙏

  • @RoughneckRC
    @RoughneckRC 4 года назад +1

    Nicely done, this is why you are the master

    • @camaroboy383
      @camaroboy383  4 года назад

      Thank you my friend!.. hope your enjoying that raminator man!

  • @gavsrc1590
    @gavsrc1590 3 года назад +1

    ALDEN COST
    U’ve earned a sub just from that mod! I’m loving it an would love the same mod for mine, should print a few an rest the waters an sell them in Ebay maybe, I’d defo buy one, looking forwards to the front mod, keep up with the good work! Looking forwards to the next!😎

  • @jrhinds3314
    @jrhinds3314 4 года назад +1

    Excellent work! I guess I'll just get in line with everyone else lol you made the car look 10 times better. Looking forward to seeing what else you do to it 🔥

    • @camaroboy383
      @camaroboy383  4 года назад

      Thank you sir, much appreciated..👍

    • @jrhinds3314
      @jrhinds3314 3 года назад +1

      @@camaroboy383 I tried reaching out to who I think is on FB messenger. I have a question for you. Is their a different way to reach you?

    • @camaroboy383
      @camaroboy383  3 года назад +1

      @@jrhinds3314 hey JR.. sorry I dont use Facebook.. I've had some health issues lately, that's why I have been scarce.. I have a bunch of the pans and dams printed up for ebay, I just need to get the tail pan lenses machined... 👍.. I've managed to get the files up for sale on cgtrader for those who have 3d printers..if my health cooperates I'm hoping to get the cnc fired up in the next day or so..👍

    • @jrhinds3314
      @jrhinds3314 3 года назад +1

      @@camaroboy383 I already purchased your file for the rear but I'm being asked by other people if I can make them one. Am I allowed to make them but giving you the credit?

    • @camaroboy383
      @camaroboy383  3 года назад

      @@jrhinds3314 absolutely.. no problem at all..👍..I have no problem with you making them for your friends or family.. 😎.. The file is just protected against mass production and distribution..👍
      I thank you for asking, not many people would.. I greatly appreciate your honesty...🙏

  • @pontiacf
    @pontiacf 2 года назад +1

    Hi there, are these still available to order ? I just purchased the felony and I totally agree that the rear is missing exactly what you make .
    So please let me know what I can do to purchase one. I don’t own a 3d printer so I’m not able to make it myself.
    I would really appreciate if you could help me
    Thanks 🙏🏻 Happy Eastern

    • @camaroboy383
      @camaroboy383  2 года назад +1

      Hey there, thanks for the kind words and stopping in to check out my channel.. greatly appreciated...👍...
      I am still making them, but have been down for a while making moulds and a vacuum machine to vacuum form the parts out of lexan...
      The 3d printed parts are great if you have a printer, otherwise they can be fragile in certain crashes.. if a crash occurs that contacts the part's, they will break...
      I encourage anyone who asks these days to wait to see if I can complete some successful vacuum pulls..
      Happy Easter to you and your family as well..✌️

    • @pontiacf
      @pontiacf 2 года назад

      @@camaroboy383 thanks keep us posted 👍🏻👍🏻👍🏻

  • @jeffreybentz7097
    @jeffreybentz7097 3 года назад +2

    That looks Freakin Awesome!!! I can't wait for you to get those out on the market. You DEFINITELY have another sale, right here. I'm subbing now so I don't miss out on this awesome body part and I'm looking forward to whatever else you have in store. Thanx brother 👍👍

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Thank you my friend..🙏.. they are listed on eBay if you would like to have a look..👍... Appreciate you stopping in to check it out, and thank you for your support my friend..🙏

    • @jeffreybentz7097
      @jeffreybentz7097 3 года назад +1

      @@camaroboy383 , I was stoked to receive your previous post alerting me that this part is now available on EBAY but unfortunately I was not able to find it this evening. I'll give it another try tomorrow. Thank you 👍👍

    • @camaroboy383
      @camaroboy383  3 года назад

      @@jeffreybentz7097 www.ebay.com/itm/124574983683
      Here is a link to the tail pans..👍

    • @jeffreybentz7097
      @jeffreybentz7097 3 года назад +1

      @@camaroboy383 , Thanx my brother. Just got mine ordered, can't wait to get it!!!

    • @camaroboy383
      @camaroboy383  3 года назад

      @@jeffreybentz7097 Thank you for your support my friend.. greatly appreciated..🙏

  • @user-sd7bh1hc8g
    @user-sd7bh1hc8g 4 года назад +1

    If you could. Add the exhaust pipes and the "nothing to see here officer" thing on the new rear end. And I think the front lower bumper-splitter thing is wierd looking for the car too. Would you change that. Please reply.

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thank you, much appreciated...
      I was thinking the exhaust could be made into the center panel of the diffuser...👍...seems like the best location..👊.. that panel will come after the front grille and the side skirts...
      Not much room for the "nothing to see here officer" decal... but I suppose you can put it on there if you can find the room for it..✌

    • @camaroboy383
      @camaroboy383  4 года назад +1

      I also appreciate you saying my work is underrated.. 👍.. I guess not many people are interested in the making parts side of rc..🤷‍♂️
      Also as for the front air dam, that part is in my newest video...check it out if you get a chance..✌

    • @user-sd7bh1hc8g
      @user-sd7bh1hc8g 4 года назад

      @@camaroboy383 is that video out

    • @user-sd7bh1hc8g
      @user-sd7bh1hc8g 4 года назад

      @@camaroboy383 and I deleted my, your work is underrated comment. How did you see that

  • @yaffajaff
    @yaffajaff 4 года назад +1

    YEP. Want one for mine now 😱 fantastic job!! 👌👌

    • @camaroboy383
      @camaroboy383  4 года назад

      Thank man, much appreciated...✌

  • @enricopolster6264
    @enricopolster6264 4 года назад +1

    That's awesome, I really would like to buy one if you diced to make them available fore sale. You did an amazing job.

    • @camaroboy383
      @camaroboy383  4 года назад

      Hoping to have the front air dam wrapped up in the next couple days..😎.. hoping to have the parts up on ebay soon...✌

  • @cbaaaa3667
    @cbaaaa3667 7 месяцев назад +1

    Waow!!! Amazing work 👏🏻👏🏻👏🏻

    • @camaroboy383
      @camaroboy383  7 месяцев назад +1

      Thank you, much appreciated..

  • @rellzrc5879
    @rellzrc5879 3 года назад +1

    I like this wish I had room for a CNC ,do make special parts for people

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Thank you, much appreciated..👍.. yes I make them as well as the front air dam.. They are listed on eBay for sale..

    • @rellzrc5879
      @rellzrc5879 3 года назад +1

      @@camaroboy383 but there's not a double motor mount for 1/10 racing, I have the redcat lightning I know you might be familiar with it but I've been looking nearly nonstop every day for or someone with a CNC that could make it, I seen the CNC cutting out Aluminum in the intro that's why I was asking

    • @camaroboy383
      @camaroboy383  3 года назад +1

      @@rellzrc5879 yes sir I'm familiar with the lightning.. it's basically a volcano, with a couple different parts and different body.. space will be the issue.. most likely why nobody has made one..
      At the end of the day just a bigger can and different gearing will get you where you want.. added motor/ esc/ battery is just adding a bunch of weight.. twin motors add nothing but torque, the end rpm is the same.. so in a nut shell a twin setup will most likely be slower top speed due to weight, but have gobbs of torque...
      Hope this makes sense..👍

  • @RaiFlyAway
    @RaiFlyAway 4 года назад +1

    Beautiful video. I really enjoyed your video. Thanks for sharing. 👍👍👍

    • @camaroboy383
      @camaroboy383  4 года назад

      Thank you for taking the time to watch.. very much appreciated.. stay safe out there..✌

  • @curbasswilliams
    @curbasswilliams Год назад +1

    I would love to see this done with the firebird tailligjts

  • @davidkill2725
    @davidkill2725 4 года назад +1

    This is a kool video you are a master and I see you love your craft hurry and get them out and put me on the list great job!

    • @camaroboy383
      @camaroboy383  4 года назад

      Thanks man for the kind words..✌.. its greatly appreciated..

  • @Bobsbargainbasement
    @Bobsbargainbasement 4 года назад +1

    Looks Killer ! I’m in on a kit if you sell them for sure bro. This is what it should look like , very nice indeed

    • @camaroboy383
      @camaroboy383  4 года назад

      Thanks dude! I appreciate the kind words and the positive response...I totally agree this is how it should have been..👍..
      Appreciate you stopping in to check it out..Stay tuned, more to come..😎

  • @yyckey5022
    @yyckey5022 4 года назад +1

    That's beautiful piece of art, look great with tail light dude.😍

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thanks for the kind words and checking it out my friend.. very much appreciated.. ✌..

  • @ixs0lst
    @ixs0lst 2 года назад +1

    Are you taking any more orders for this part?

  • @Killa_b_rc
    @Killa_b_rc 4 года назад +2

    Broooo. You’re dope af for this!

    • @camaroboy383
      @camaroboy383  4 года назад

      Thanks man..appreciate you stopping in to check it out and comment...✌.. front air dam is just about finished.. next video will be up in a couple days...👍

  • @ryda386
    @ryda386 3 года назад +1

    Is this available yet?????? Need ASAP lol very nice great job

    • @camaroboy383
      @camaroboy383  3 года назад

      They are typically listed on eBay unless I'm out of stock.. but I usually get them back on there within a few days of selling out..👍

  • @bernardwooten3818
    @bernardwooten3818 4 года назад +1

    Dude!! That is beautiful!! I definitely share your opinion about the stock tail pan. Yours looks so much cleaner - how it should've come from Arrma. Do let us know if/when you decide to sell those. I can't wait to see what you have in mind for a kit. Cheers!

    • @camaroboy383
      @camaroboy383  4 года назад

      Thank you sir! I'm really happy with the results.. all the work put in was well worth it...👍.. I'm honestly blown away by the positive response it has created...😎.. once the parts are all said and done I will post a video with my plans for release..😉
      Thanks for dropping in to check it out.. very much appreciated ✌

  • @carlosspriggs8267
    @carlosspriggs8267 4 года назад +1

    Yes please keep us informed, I will definitely buy the kit from you I love the way that looks and just a suggestion, if you decide to do a kit I would do a kit with LED already wired and then one with out but great job I'm Tell jealous 🤣

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Will do.. it will be a bit for sure, still plenty of cad work and prototyping to be done on the rest of the parts..👍..
      As for the LEDs in the tail pan I'm not sure yet if those will be included with the pan or not.. time will tell..👍
      Thanks for checking it out..✌

  • @venosanchez6263
    @venosanchez6263 3 года назад +2

    Hello Rc wizard. Are you making anything for the arrma felony Lower Side skirts ??and also I need a grill for the arrma felony

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Hello sir.. yes, the process has started on the side skirts, but time has been limited for me lately..😒... Hope to be back on that soon.. 👍
      As for the upper grille, I will be listing those very soon my friend.. I've finally sorted out the lenses enough that it can all be released.. 👍.. hoping to have them listed in a week or so... I will post a video of the grille and lens release..✌️

    • @venosanchez6263
      @venosanchez6263 3 года назад +2

      Thanks so much my friend. I just saw your post. I will be praying for you too feel better. I truly hope all will be well. Ima be waiting on your up coming new creations. Much support n love. Feel better sir. And thanks

  • @robertjmyersjr5684
    @robertjmyersjr5684 3 года назад +1

    Hello Alden that looks amazing my man. i'm just like everyone else when can i order one from you let us know please don't keep us all waiting too long.

    • @camaroboy383
      @camaroboy383  3 года назад

      Thank you my friend..👍.. appreciate you stopping in to check it out..😎...
      They have been listed on eBay since Jan. 1st... They go fast though so you have to keep an eye out for them..👍.. link to my page Is on the release video..

    • @ewinghubbard
      @ewinghubbard 3 года назад

      Send me the link please 😔

  • @Germanrcplayground
    @Germanrcplayground 3 года назад +1

    Omg. I need that in germany. Looks awesome

  • @AdrenalineAshRC
    @AdrenalineAshRC 4 года назад +2

    That’s awesome bro just joined the family #325 when I get my felony I’m coming to you 😎👍

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thanks for stopping in to check it out..👍.. appreciate the sub and the kind words..✌

  • @okiedoak201
    @okiedoak201 4 года назад +1

    Alden....holy smoke Dude...that is sick...

    • @camaroboy383
      @camaroboy383  4 года назад

      Thank you my friend.. I'm loving the look for sure, I cant wait to start on the other parts..going to be a complete transformation..😎
      I hope you are doing well buddy.. get your boating in now brother, before you know it we will have hard water..😔.. you guys still running?

  • @dallasnissaninfintienthusi8786
    @dallasnissaninfintienthusi8786 4 года назад +3

    OK please let us know when you’re selling these I need one desperately

    • @camaroboy383
      @camaroboy383  4 года назад

      Will do my friend.. I will be keeping g everyone posted..they are in production now..and should be available soon..👍

  • @jessekormick3796
    @jessekormick3796 2 года назад +1

    That's some bad ass engineering 👍👌👊

    • @camaroboy383
      @camaroboy383  2 года назад

      Thank you for stopping in to check it out... Appreciate you...✌️

  • @ixs0lst
    @ixs0lst 2 года назад +1

    Hello. Are you taking any orders for this part? I would like one please.

  • @troyhooper6896
    @troyhooper6896 Год назад

    You ever end up making kits to buy , i really like this .

  • @l3adllvllutha
    @l3adllvllutha 2 года назад +1

    So……is this kit for sale yet. Awesome work!! I need these!!! 💵💳

    • @camaroboy383
      @camaroboy383  2 года назад

      Thanks for checking it out, much appreciated.. yeah they were available for the past year or so.. I'm trying to vacuum form them at this time so I haven't been printing them the past couple months.. building the vac machine and the moulds has been very time consuming, but hope to finish it all ASAP..

  • @armandom8265
    @armandom8265 Год назад +1

    By any chance, will you be bringing these back to market? Super interested in getting that rear panel. Looks amazing!!

    • @camaroboy383
      @camaroboy383  Год назад +1

      Thanks for taking the time to check out the video, much appreciated..
      I'm still printing them now and then, plan was to produce them in vacuum formed polycarbonate, but life just got in the way...
      I can still print them if your interested.. 👍

    • @armandom8265
      @armandom8265 Год назад +1

      @@camaroboy383 Yes sir!! I would be super interested in two of them, I got my father and I matching black Arrma Felony’s for Christmas 🎄

    • @camaroboy383
      @camaroboy383  Год назад +1

      @@armandom8265 , no problem, give me a few day's and I'll get some going.. were you interested in the front air dam's as well? Or just the rear tail pans?..

    • @armandom8265
      @armandom8265 Год назад +1

      @@camaroboy383 Just the rear tail pans please. And thank you for your time, I appreciate it 🫡

    • @camaroboy383
      @camaroboy383  Год назад +1

      @@armandom8265 hello sir.. still interested in the tail pan for the felony? I have a couple here ready.. just let me know...✌️

  • @driverman8615
    @driverman8615 2 года назад +1

    WOW cool part but how much did all that equipment cost to make it?? And I want one.

    • @camaroboy383
      @camaroboy383  2 года назад

      Thanks, appreciate you stopping in to check it out.. a 3d printer large enough to print this part would be in the 400-1000 dollar range..
      The design software is around 500 a year.. Of course the knowledge to run it all takes a long time to aquire...👍
      Both are very useful tools to have...✌️
      One day soon they will be available again.. Life interrupted the process unfortunately...

    • @driverman8615
      @driverman8615 2 года назад +1

      @@camaroboy383 Thanks for the info hope all goes well for you.

    • @camaroboy383
      @camaroboy383  2 года назад

      @@driverman8615 Thank you, greatly appreciated, I hope to have some of these parts vacuum formed fairly soon.. all the moulds are made just have to finish the vacuum machine...👍
      The 3d printed parts are great, but can be susceptible to breakage during a crash..

    • @driverman8615
      @driverman8615 2 года назад +1

      @@camaroboy383 When parts become available please let me know. trying to work my felony up to 100mph.

  • @Erikootje
    @Erikootje 3 года назад +1

    hellow, for the red tail lenses, in the video you machined them, and at the same time they are offered as 3d files to print.
    But how will the lenses look when printed, will it have the same finished look like the machined one in your video?
    Like how do you get the red color? I assume painting. But what plastic can be used for the overal realistic lens effect? Got any suggestions for that? Thx

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Correct.. the lenses I use and sell with the pans are machined from a real lens..
      The printed lenses will not have the honey comb pattern in them.. transparent red PETG is your best bet for the realistic look if printing them..

    • @Erikootje
      @Erikootje 3 года назад +1

      @@camaroboy383 aight thx, so alternatively we can simply wait untill machined lenses are available again from you?

    • @camaroboy383
      @camaroboy383  3 года назад +1

      @@Erikootje I only make them per order, I do not list them separately.. But I can machine a set for you if that is something you want... They are around 17 bucks shipped to the lower 48 states.. just let me know if that is something you want..
      You may want to print some first, to see how they look..

    • @Erikootje
      @Erikootje 3 года назад +1

      @@camaroboy383 gotcha, thx for the tips!

  • @bleon2368
    @bleon2368 2 года назад +2

    Hello, are you selling the ready made units or just the program?? If you’re selling the ready made units can you please send me a link. Thank you

    • @camaroboy383
      @camaroboy383  2 года назад

      Yes, I sell the parts on my eBay page.. you can just search arrma felony tail pan to find them on eBay.... production has stopped for the moment though, so I have none in stock.. I'm gearing up to try and vacuum form them, in the process of making the vac table now..
      In the end they would be much more durable, and significantly lighter... I should know if it will all work out in a few weeks..👍

    • @bleon2368
      @bleon2368 2 года назад +1

      @@camaroboy383 Awesome thank you

  • @klebersilva751
    @klebersilva751 Год назад

    awesome work dude!!! are you still selling this incredible kit?? I´m from Brazil, would buy them from eBay, if you have them. Congratulations bro

  • @bradsparta6682
    @bradsparta6682 3 года назад +1

    I would love one of these I just ordered the felony a few days ago! I tried finding them on your eBay but couldn’t find them anymore, do you have a different link?

    • @camaroboy383
      @camaroboy383  3 года назад +1

      I'm currently out of stock on the pans.. I should have some back in stock within a week or so...👍

    • @bradsparta6682
      @bradsparta6682 3 года назад

      @@camaroboy383 and how much are they?

  • @tommym7691
    @tommym7691 3 года назад +1

    Hi there buddy just checking back in with u to ask if u considered making me one of the camaro rear end pieces for my car ?

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Hello sir.. I did, and released a video on the update.. 👍..

  • @breakitrc8004
    @breakitrc8004 4 года назад +1

    I want it that’s came out better than I have thought of

  • @John-np2bf
    @John-np2bf 9 месяцев назад +1

    Wow! Nice. The way it should have been...

    • @camaroboy383
      @camaroboy383  9 месяцев назад

      Thank you.. much appreciated.. 👍

  • @specops420
    @specops420 2 года назад +1

    I bought the .stl files and went to Craftcloud grand total shipped was $70.15. I set x1Tail Pan - PLA(FDM) standard black, x2 Pan Buckets - PLA(FDM) standard silver, x4 LED Retainer - PETG(FDM) standard silver, x2 Pan Lenses - Transparent Resin(LCD) standard translucent red. I havent got it yet so I have no idea how it'll turn out anyone reading this if you know about 3d printing let me know if this looks/sounds correct or what can i expect?

    • @camaroboy383
      @camaroboy383  2 года назад +1

      Thanks for your support jon, much appreciated.. Hope you like the look when you get the parts in..
      All the parts you listed are correct for the tail pan install..👍
      I've never used or seen the parts from craftcloud, But I would assume being a larger company the parts should come out nicely.. (we would surely hope so anyway)...
      If you have any questions on the install or anything I would be glad to help, just drop me a line..
      Thanks again for your support..

  • @fangrc3404
    @fangrc3404 3 года назад +1

    AWESOME JOB BRO!!!...it sound a little heavy. How much dose it weigh?

    • @camaroboy383
      @camaroboy383  3 года назад

      Thanks..👍...They come in around 100+ grams.. The extra weight is welcomed though, the loose nature of the felony is toned down some with the added mass...

  • @justin83--
    @justin83-- 23 дня назад

    this is perfect, i would love to purchase one from you. are they for sale?

  • @dolobrolic6066
    @dolobrolic6066 3 года назад +1

    When is this going to be available on eBay? 👍🏾great job!!!

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Has been for quite some time my friend..✌️

  • @cindyshields5753
    @cindyshields5753 3 года назад +1

    This needs to be made and needs to be able to be purchased

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Thanks for stopping by to check it out.. they have been available since January..👍.. they are listed on eBay as well as the front air dam..✌️

    • @cindyshields5753
      @cindyshields5753 3 года назад +2

      @@camaroboy383 what is the link for it? And what is the name for it so I can search for it? Thanks so much

    • @camaroboy383
      @camaroboy383  3 года назад +1

      @@cindyshields5753 I can send a link later or you can find it in the release video I uploaded..👍

  • @SerialDesignationTOM
    @SerialDesignationTOM 6 месяцев назад +1

    I am going to say that suits the Arrma felony much better than the original did. I didn't like the original because of the gaping holes, Polo RC Creations did make lights for it, but I would rather have your custom-made Camaro for the arrma felony if I had one, I have really bad impulsiveness when saving my money, I have been trying to save up, and I have got £57.10 saved up but I might try to save up for the arrma felony. So I can get that bumper, but it's too bad for me because I live in the UK and not the US and my dad doesn't trust the shipping containers, so I might end up losing it at sea, so yeah, by the way, that bumper looks sick as hell.

  • @R1RoxHighSpeed
    @R1RoxHighSpeed 2 года назад +1

    Hey you doing are you selling them back diffusers that boy cold in look good sir

    • @camaroboy383
      @camaroboy383  2 года назад

      Thanks, appreciate..🙏.. yes, but I'm in the process of switching to vacuum form to lower the cost and increase durability for the end user.. once I get this vac table operational I'll post a video..👍..

  • @Zental_7
    @Zental_7 8 месяцев назад +1

    Hey Alden, you still making these by any chance??

    • @camaroboy383
      @camaroboy383  8 месяцев назад +1

      Hey Chad, definitely appreciate you checking my stuff out, and nice chatting with you today.. 🙏

    • @Zental_7
      @Zental_7 8 месяцев назад

      Like wise bro n thanks for making the great content! 😊

  • @_AdventureClub_
    @_AdventureClub_ 3 года назад +2

    Man, great that that printer didn't take 1 month to print, imagine watching it on RUclips 1 month printing.

  • @peterneal8567
    @peterneal8567 2 года назад +1

    when can i buy it from you! its amazing!

  • @bucksrcs1583
    @bucksrcs1583 4 года назад +1

    That looks good bro awesome job 👍

    • @camaroboy383
      @camaroboy383  4 года назад

      Thank you brother! Means alot..😎👍✌

  • @LiquidSSSnake
    @LiquidSSSnake 4 года назад +1

    I wish I could CAD like that. Nice!
    I don't have a felony, but a C7 tails might look wicked back there. Just saying

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thanks man, definitely took some time to get the hang of cad, but fusion 360 is awsome! 😎
      You may be right about that.. vette tail probably would look good since it's such a hybrid..👊
      Thanks for stopping in to check it out man, much appreciated ✌

  • @noeysfastrc3291
    @noeysfastrc3291 4 года назад +1

    Holy crap brother you are a creator with amazing talent. I randomly came across your vid. I will be getting a felony here soon but that is exactly what the felony needed. Bro if you decide to sell those kits I would be very interested in getting one from you. I just subbed brother keep being creative👍

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thank you for the kind words, and the sub, it's greatly appreciated man.. glad to have ya along for the journey my friend..😎.. hope you get your felony soon, they are a blast!..
      Appreciate you bro..✌

    • @noeysfastrc3291
      @noeysfastrc3291 2 года назад

      @@camaroboy383 hey sir are you still building the mods for the felony?

  • @rcpimp6419
    @rcpimp6419 4 года назад +1

    Amazing work!

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thank you sir..✌.. appreciate the kind words and sub my friend.. welcome to the channel..👍

  • @burn1gotbeats
    @burn1gotbeats 4 года назад +1

    Now this is the stuff I wish knew how to do nice sirr scale 👏

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thanks man..👍.. it's well worth learning for sure.. I tell everyone that's interested in learning cad to not hesitate for a second.. fusion 360 is free for hobbyist and students.. and you can learn at your own pace..😎.. you should definitely check it out..
      Thanks again for stopping by to check it out and commenting..✌

    • @burn1gotbeats
      @burn1gotbeats 4 года назад +1

      @@camaroboy383 I’m subscribed. Motivation😇

  • @Tegridy_Rc
    @Tegridy_Rc 4 года назад +1

    Awesome bro that’s kick ass!

  • @christophergreaves2947
    @christophergreaves2947 4 года назад +1

    Ok Send me one I can see for myself 🤣🤣 Looks awesome Arrma should send you a check..when they are available please let me know

    • @camaroboy383
      @camaroboy383  4 года назад +1

      🤣🤣🤣🤣... thanks man..✌.. for sure will keep everyone posted..

  • @never-stock-rc2968
    @never-stock-rc2968 3 года назад +1

    I will buy one for sure

  • @activtrickz41
    @activtrickz41 3 года назад +1

    I would like to order a kit of this! Also any other cool felony mods lmk how to find them!

    • @camaroboy383
      @camaroboy383  3 года назад

      The tail pan and front air dam is listed on eBay..👍.. just search arrma felony tail pan, and it should pop up.. and if your interested in the front air dam that's listed on my page as well

  • @xKmotx
    @xKmotx 4 года назад +1

    I definitely want one of your kits! I'm gonna share this on a Facebook Arrma group. 👍

    • @camaroboy383
      @camaroboy383  4 года назад

      Thanks brother, cant thank you enough for the kind words and sharing the link..✌.. all my arrma forum brothers will be the first to know..😎..

  • @tropicthunderbolt
    @tropicthunderbolt 4 года назад +1

    W.T.FREAK!!! I didn't know it could look better then it already does. Aside from the wing (I didn't like) I wasn't bothered by anything else. But shit. That kilt it!!! My bro..another for sure sale right here!!!

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Appreciate that my man..👍.. I'm actually working on the front air dam now..😎

    • @tropicthunderbolt
      @tropicthunderbolt 4 года назад +1

      @@camaroboy383 sweet. Looking forward to it!!

  • @KaniZRC
    @KaniZRC 4 года назад +1

    Nice craftsmanship

    • @camaroboy383
      @camaroboy383  4 года назад

      Thank you..👍.. much appreciated..✌

    • @KaniZRC
      @KaniZRC 4 года назад +1

      @@camaroboy383 im not interested on your rear bumper. I want to buy your machine hahahahaha jk good job man👏👏

    • @camaroboy383
      @camaroboy383  4 года назад +1

      @@KaniZRC those machines are only a click away for you with the good ole internet..🤣🤣.. cad/cam as well..👍..
      Make the leap, you will be happy you did...😎

  • @mikeblankumsee4668
    @mikeblankumsee4668 3 года назад +1

    Havent even started watching and i wanba know how much do i have to pay for this!

    • @camaroboy383
      @camaroboy383  3 года назад

      🤣🤣🤣🤣🤣.. awesome comment..🤣🤣🤣..

  • @2losangeles
    @2losangeles 3 года назад +1

    Man that's awesome work you can easily make some coin from making and selling these I will straight up buy one of these from you 100% if you are definitely making them for sale 👌🙏

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Thanks for the kind words my friend.. yes, I have a bunch of the tail pans and air dams made to put on ebay.. my health has been not so good lately, but hope to have them on ebay before the new year..👍
      I will be posting a video as soon as they hit ebay..👍..
      Thanks for stopping in to check it out..its much appreciated...✌

    • @2losangeles
      @2losangeles 3 года назад +1

      @@camaroboy383 good man I've subscribed so I can keep an eye out for the update video 🙂 hope you get well soon fella stay safe.

  • @Germanrcplayground
    @Germanrcplayground 3 года назад +1

    Where can i buy it?

    • @camaroboy383
      @camaroboy383  3 года назад

      They are posted on eBay.. if you have access to a 3d printer the files can be purchased on cgtrader... Thanks for stopping in to check it out..✌️

  • @DBoi5591988
    @DBoi5591988 3 года назад +1

    Any update on ordering one of these?

    • @camaroboy383
      @camaroboy383  3 года назад +1

      Hey D G.. The release video was posted I believe early January.. the tail pans and air dams are listed on eBay my friend..👍

  • @murtasma
    @murtasma 2 года назад +1

    anywhere you have the stl for sale or download?

    • @camaroboy383
      @camaroboy383  2 года назад

      Yes, they can be found at cgtrader.com... 👍...

  • @meanf1502
    @meanf1502 3 года назад +1

    Man that's mean looking parts you made dose it take a while to get the 3d printed down to make parts like you did

    • @camaroboy383
      @camaroboy383  3 года назад

      Thanks man, appreciate you checking it out and dropping a comment..👍
      The cad takes longest to get figured out, after that it's just measurements and prototypes.. the slicer software for the printers takes some time as well.. figuring out what settings do what and recognizing the setting problems in the prints...
      I've been doing both for about 5 years now and still learn every day...✌

  • @andrewwhiting5526
    @andrewwhiting5526 4 года назад +1

    Looks so cool, I'm another that would be interested if you decide to make them available 👍 how long did it take to print it?

    • @camaroboy383
      @camaroboy383  4 года назад

      Thanks for checking it out..👍.. The tail pan takes anywhere from 10hrs to 30+ hrs to print depending on layer hieght and print speed.. thankfully the machines are reliable enough to just hit print and walk away..😎..
      Thanks again for stopping by the channel to check it out..✌

  • @fitzgeraldrichards6134
    @fitzgeraldrichards6134 2 года назад +1

    Hey Alden is there any way you can make this an stl file would love to get it and support

    • @camaroboy383
      @camaroboy383  2 года назад

      Hey buddy, appreciate... The files are over at cgtrader.. I posted them there for sale about a year ago... 👍... Again, appreciate the support and you stopping in to check it out...✌️

    • @fitzgeraldrichards6134
      @fitzgeraldrichards6134 2 года назад +1

      @@camaroboy383 thanks will go check out

  • @onemansvideos2134
    @onemansvideos2134 4 года назад +1

    Thats bad ass can you get the outsides tighter on the defuser tho

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thanks my friend, appreciate that..👍.. because the tail pan is part of the body, not part of the car, it's tough to close those gaps without difficulty with body install.. I did have it tighter on some of the prototypes and it was fiddly getting the body on..🤦‍♂️.. tolerances were increased until I could just drop the body on..😎👍..
      While I would like to tighten it back up, it's just not practical..✌

    • @onemansvideos2134
      @onemansvideos2134 4 года назад +1

      @@camaroboy383 thats understandable i still like it fits the body perfectly that lexan part had to go

    • @camaroboy383
      @camaroboy383  4 года назад +1

      @@onemansvideos2134 I 100% agree my friend.. same with when I did the front air dam.. I was just not a fan of the lexan mold designs.. by far the rear was worse, but I still wanted a cleaner front air dam...👍...
      The upper grille is about done, then on to the side skirts..✌

    • @onemansvideos2134
      @onemansvideos2134 4 года назад +1

      Will there be video of those?

    • @camaroboy383
      @camaroboy383  4 года назад

      @@onemansvideos2134 yes... hope to have the video of the grille up soon.. I'm currently in the process of molding my own lenses..👍

  • @cmwilfred
    @cmwilfred 4 года назад +1

    Wow 🤩 You need to sell it as a package 🙏🏽

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Should have some parts up for sale soon..👍.. I'm just wrapping up the front air dam in the next couple days..😎..

    • @cmwilfred
      @cmwilfred 4 года назад +1

      @@camaroboy383 can’t wait to see them 🥰 sign me up ☝🏽

  • @spade5328
    @spade5328 2 года назад +1

    How much?? I want to buy one from you

  • @northantsbashers8851
    @northantsbashers8851 4 года назад +1

    Mate thats a nice upgrade this is what I'm missing in the felony. Sub and like 👍

    • @camaroboy383
      @camaroboy383  4 года назад +1

      Thank you sir for the kind words..👍.. I appreciate you stopping in to check it out, and comment.. thanks for your support..✌

  • @caspfornia
    @caspfornia 3 года назад +1

    Pretty cool stuff I need 1 of those. How much 🤘🤪🍻🍻🍻

  • @TheHasan187
    @TheHasan187 3 года назад +1

    I got $250 for all the mods you put out let me know you did a great job you can make a shit load of money not that you need it.

    • @camaroboy383
      @camaroboy383  3 года назад

      Thank you my friend.. appreciate the kind words..👍.. if you are interested in the tail pans and front air dam they are listed on eBay..✌️