It's nothing special, just a stock 360 block with all forged internals, MLS head gaskets, Edelbrock Performer heads that have been ported, Edelbrock Super Victor intake with an 850 Quick Fuel carb that I set up for blow through use. The cam is a Howards 231/235 @ .050, .510/.530 lift Hydraulic roller with solid roller lifters. The turbo setup I made from a Speedway weld up header kit and a couple of t4 flanged GT35 turbos from Ebay. The car itself is pretty much stock, and it weighs 3600 lbs. with me in it. The trans is a stock rebuilt 727 with a Dayco 3500 converter. The rear axle is an 8.75 with 4.56 gears that we will probably change later on, because it's geared way too low for the turbos.
@DaveCaresForYou It has a Scat forged steel crank, Eagle H-Beam rods, and Icon 2618 forged pistons. We did have the block decked just enough to clean it up.
F-body mopar that hauls ass, keep the vids coming!
Wasn't expecting that. Cars got more in it no doubt....
You keep showing them how it’s done bro !! Darn fast launch 👍
Thanks man. That car gets a little faster every time we do a little tuning on it. Not too bad for a 3600 lb street car
@@sbcperformance413 your welcome bro, you keep up the good work!
NICE! What's the other specs on the car?
It's nothing special, just a stock 360 block with all forged internals, MLS head gaskets, Edelbrock Performer heads that have been ported, Edelbrock Super Victor intake with an 850 Quick Fuel carb that I set up for blow through use. The cam is a Howards 231/235 @ .050, .510/.530 lift Hydraulic roller with solid roller lifters. The turbo setup I made from a Speedway weld up header kit and a couple of t4 flanged GT35 turbos from Ebay. The car itself is pretty much stock, and it weighs 3600 lbs. with me in it. The trans is a stock rebuilt 727 with a Dayco 3500 converter. The rear axle is an 8.75 with 4.56 gears that we will probably change later on, because it's geared way too low for the turbos.
@DaveCaresForYou It has a Scat forged steel crank, Eagle H-Beam rods, and Icon 2618 forged pistons. We did have the block decked just enough to clean it up.
@DaveCaresForYou Thanks man
LOL the LS had to use the starter to warm up the motor.....
Bad ass !Seen you make some passes at Edgewater
Man, that is one Fugly car. But then it is a Blow Parts.
Triggered much
What's a Blow Parts?
🖕❄️
i bet its better than ur shitbox f-150