Hi, I replaced the faulty DPF sensor but the diagnosis continues to show P2456 error. The stranger thing is that with the engine off the input sensor shows pressure -202 Hpa. What do you recommend me to do? Thanks for your help.
Tomorrow I'm going to the mechanic who did the sensor adjustment for me last week. Before that, I changed one, then the other at another master. But that mechanic didn't make an adjustment and didn't know which one was faulty. First he replaced one, and when it happened again, he returned that one and replaced the other. The third and fourth mechanics told me that it must be a problem with the dpf, but without doing any diagnostics. I'm going to the last one tomorrow. He is in the dpf cleaning business and says the dpf is great. I'm really interested in what will happen now Polo 1,4 TDI 90 ks, 2016
Hello, I have a error p2002 bank1 thresshold, and my value for air pressure sensor at neutral is 10 mbar, that is ok? I m thinking to change the differential pressure sensor but i dont know wich one the left one or right one
Hello, i have P0471 error code (G450 sensor error). I need to change the G450 sensor but which one it is ? Is it the left one or the right one ? Thanks !
@@koriander3475 Thank you for this answer. I first tried the left one but same error occured. Thus i changed right one and the error disappeared. But the same failure came back this year (2 months ago). So i changed the same sensor again. I wonder if i'll need to replace it every year...thankfully it is cheap ;)
Is this the pressure senor connect to the before DPF pipe sensor? i have this same setup on my Audi A3, i need to know which one is before to do DPF clean thank you for any help.
Message me some details of what happened because i just had my pump and belt changed on my mk7 GTD from VW and now the sensor has melted. Help a brother out if you have any info much appreciated
gopro sa nedaju točit detaili a zvuk je bez pridavneho micu horší. musel som kupit novy fotak lebo starý mal doškrabany objektív. je to problem kupit spravne. lebo az po kupe zistis co si na starom mal a na novom to nieje a jake formaty dava nove zariadenie a či ti ho zobere renderovaci program atd.
If i want to change both, are both the same ? I saw by me that the same oem number is 03L906051B . Must be adapted both? Thx for the great video and help.
@ndrew yes i fix it. it was the same two sensors. I change booth and everything was ok. 2 months later the golf begin to lose water. It was not the waterpump and not the AGR. Zylinderhead!!!! 112000km and 4 years old!!! I buy a brand new Opel Insignia. Its a much better car then Volkswagen!!!!
hello, I have a question for you, the spiral light flashes, and then the check engine, drove to an authorized service, said that the pressure sensor, changed it, but again after a couple of days it started the same, the car goes normally, which could be
I have a golf 7 1.6 tdi from 2016 After I start the car in less them a minute the rpm goes up to 1000 rpm and stays like that. Only if I turn it off and start it again it goes back to 750 rpm... But as soon as I start to drive it it goes back to 1000 rpm Already ad a forced regeneration done in a shop it's the same. No lights on the dash. Anyone can help please?
ano tak ako pises, po vymene snimaca vymazat jeho adaptacne hodnoty a nasledne spravit zakladne nastavenie / adaptaciu pre novy vysledkom coho by mal byt uspesny READINES skript = passed "all green"
Zdravim, pokial diagnostika ukazuje abnormalne hodnoty je potrebna ich vymena aj ked je to dost zriedkave ze treba menit naraz oba... skusil by som ich odpojit a pripadne skusit precistit.. :)
@@2693andry vypisuje mi diagnostika chybu 19226 filter pevných častíc rada valcu 1 a P200200 efektivita na spodní mrzí, čo mám robiť? Vymenil som ľavý snímač tlaku výfuk plynov a nepomohlo
Ahoj mam Golf 7, 2.0, 110kw ,2014 Na mojom golfe mam len jeden z týchto ventilov keďže nemám blue motion. Mal som zlomenú "trubičku" vstup do ventilu na ktorej je hadička, auto raz za čas vyhodilo kontrolku motora ale po vymene som to nedal na diagnostiku. Takze teraz mam otázku okrem toho ze treba vymazať chybu, treba ten ventil aj naučiť kedy sa má otvorit alebo nastaviť nejaku tu jeho reguláciu aby správne fungoval?
hello, I just changed my EXHAUST PRESSURE SENSOR G450 on my vw golf 1.6 tdi 110hp 2014 , after a vcds scan , everything well till I needed to to the adaptation with vcds , I went to engine block to do the coding but the CODING II - 11 on my vcds is greyed out and and I don't have acces there....any ideeas why is that??? can anyone else help me with these problem???
@@PumpKinLand am mers in service si dupa o verificare eu am pus senzorul bun in loc la senzorul bun si pe cel rau l-am lasat ... de asta nu am reusit eu , rookie mistake ... a inversat mecanicul senzorii si a mers ... nu a trebuit adaptare ... isi face singur mi-a spus mecanicul... nu am mai aparut eroare dupa asta ...
Hello , i got check engine light hooked on friends vcds , i'v got 4.1 v constant voltage on differential preaaure sensor , when trottle to full or no trottle . Can that cause error ? Thank you
How to know wich one to replace? Or just both....thanks
Tech manual: Installation location overview - engine 1.6 and 2.0 TDI CR compartment:
....position you facing on vehicle front:
3 (left) - Differential pressure transmitter G505
4 (right) - Exhaust gas pressure sensor 1 G450
Is the left one before DPF or after?
@@naimahmed6147left sensor is entrance DPF before ..G505
And the right is G450 at output/after
Please tell me, are both the same? If i want to change both, have i to buy two the same?
Hi, I replaced the faulty DPF sensor but the diagnosis continues to show P2456 error. The stranger thing is that with the engine off the input sensor shows pressure -202 Hpa. What do you recommend me to do?
Thanks for your help.
Did you find problem??
@@martinerceg7325 Unfortunately not!!
Tomorrow I'm going to the mechanic who did the sensor adjustment for me last week.
Before that, I changed one, then the other at another master.
But that mechanic didn't make an adjustment and didn't know which one was faulty.
First he replaced one, and when it happened again, he returned that one and replaced the other.
The third and fourth mechanics told me that it must be a problem with the dpf, but without doing any diagnostics.
I'm going to the last one tomorrow.
He is in the dpf cleaning business and says the dpf is great. I'm really interested in what will happen now
Polo 1,4 TDI 90 ks, 2016
Clean the dpf
Hi
What type of vcds do you use? is professional?
Thank you
Bonjour j'aimerai savoir si le deuxième capteur est identique au premier car j'ai les deux capteurs qui on cramer et je doit les changer
Bonjour ou se trouve le capteure de pression des gaz échappement pour touran tdi 2l bkd 2004 svp? Merci
hi,is necessary a codification when replace this sensor ??
Hello, I have a error p2002 bank1 thresshold, and my value for air pressure sensor at neutral is 10 mbar, that is ok?
I m thinking to change the differential pressure sensor but i dont know wich one the left one or right one
I have the same issue.
Hello Claudiu.Can you tell me how you solved the p 200200 problem?
@@rogirid1045 hello i didnt i m using the car with this error
@@CLAU9511hello, and now?
@@ApexVison_official dpf off solved the problem, but if you wanna keep the dpf you have to clean it,egr check and replace this sensors with OEM.
Po montáži robíš aj základne nastavenie tych senzorov? Dik
and G505 is the DPF differential pressure sensor (the right one). It's pretty strange on EU6 cars.
V prípade mínusových hodnôt pri hrubej hodnote (raw value), pôjde asi pravdepodobne o chybný snímač ? Ďakujem za radu.
Tak tohle by mě taky zajímalo. Já tam mám místo nuly ted -2
@@Triskeleon88 a vypisuje aj nejakú chybu?
Ne žádnou..
@@Triskeleon88 tak maximálne urobiť kalibráciu a ináč by som to neriešil
Stejně jde DPF ven v pondělí je skoro Full tak se uvidí
Hi, what value should the g505 sensor have?
Hello, i have P0471 error code (G450 sensor error). I need to change the G450 sensor but which one it is ? Is it the left one or the right one ? Thanks !
right one on ea 288
@@koriander3475 Thank you for this answer. I first tried the left one but same error occured. Thus i changed right one and the error disappeared. But the same failure came back this year (2 months ago). So i changed the same sensor again. I wonder if i'll need to replace it every year...thankfully it is cheap ;)
@@ludovicboutaut8161 Did you adapt it with vagcom after installation ?
@@NecPachi how to adapt it with obd11?
Is this the pressure senor connect to the before DPF pipe sensor? i have this same setup on my Audi A3, i need to know which one is before to do DPF clean thank you for any help.
I'm wondering the same, did you sorted this out?
@ivandimov9712 I think it's the same, I have no fault code though, but I'm going to change them soon myself.
can you explain p2002 error codes and reasons with a video?
Hai risolto il problema?
@@kirobluz7731
By replacing these sensors this problem was not solved. However, do not forget to adapt after changing it.
Tnx
Cum ați rezolvat problema!
Dá sa ti napísať niekde správa ? Mám pár technických otázok ohladom Dpf
My dpf sensor melted and vw think it was caused after changing the water pump and timing belt
Message me some details of what happened because i just had my pump and belt changed on my mk7 GTD from VW and now the sensor has melted. Help a brother out if you have any info much appreciated
@@zamaanrana1 Hi, do you have any further info on this? Thanks.
@@jordyd2834 turned out it was Vws fault was fixed the following day with golf Gtd 7.5 provided for the week.
Had the same issue, timing belt and water pump changed and the sensor melted the day after. I have a Audi A3 2.0tdi
Francesco Ancillotti the same thing happened to my Octavia 3. Who knows what's going on..?!
Entschuldigung kann ich dich was fragen und wie heißen die 2 teile golf 7 GTD 2015 2.0 Liter
Differenzdrucksensor
Si presiel na GoPro? Palec hore za kvalitu!
gopro sa nedaju točit detaili a zvuk je bez pridavneho micu horší. musel som kupit novy fotak lebo starý mal doškrabany objektív.
je to problem kupit spravne. lebo az po kupe zistis co si na starom mal a na novom to nieje a jake formaty dava nove zariadenie a či ti ho zobere renderovaci program atd.
If i want to change both, are both the same ? I saw by me that the same oem number is 03L906051B .
Must be adapted both? Thx for the great video and help.
yes
@@waheedas30 and how you adapt them?
Ja nu welcher denn linke oder rechte..oder beide neu
It the P2002 the same fault ??? vW golf 7 1.6 tdi bluemotion
mechanics.stackexchange.com/questions/46790/how-do-i-fix-the-error-code-p2002-which-is-caused-by-filter-or-sensor-in-the-exh
Thank you very much.
@@ahmedinadilovic3366 did you fix the problem? Thanks
@ndrew yes i fix it. it was the same two sensors. I change booth and everything was ok. 2 months later the golf begin to lose water. It was not the waterpump and not the AGR. Zylinderhead!!!! 112000km and 4 years old!!! I buy a brand new Opel Insignia. Its a much better car then Volkswagen!!!!
@@ahmedinadilovic3366 so you changed both sensors? Are both same? Thanks
hello, I have a question for you, the spiral light flashes, and then the check engine, drove to an authorized service, said that the pressure sensor, changed it, but again after a couple of days it started the same, the car goes normally, which could be
Dpf
Quero também vidios com legendas português
I have a golf 7 1.6 tdi from 2016
After I start the car in less them a minute the rpm goes up to 1000 rpm and stays like that.
Only if I turn it off and start it again it goes back to 750 rpm... But as soon as I start to drive it it goes back to 1000 rpm
Already ad a forced regeneration done in a shop it's the same.
No lights on the dash.
Anyone can help please?
Estoy igual, fue ese sensor?
Hi! I have the same issue. Today my car got broken. Someone diagnosed and say it s the same senzor.
Did you found the problem? In meantime…
Yo lonhe cambiado pero sigue igual, mucho arrancar y parar y no hacer trayectos largos es el problema
A po výmene netreba spraviť adaptáciu snímača?
ano tak ako pises, po vymene snimaca vymazat jeho adaptacne hodnoty a nasledne spravit zakladne nastavenie / adaptaciu pre novy vysledkom coho by mal byt uspesny READINES skript = passed "all green"
@@michaladamec1618 caw posli mi na seba mail
Hello the other sensor
Zdravím, je potrebné vymeniť obidva snímače? Ďakujem
Zdravim, pokial diagnostika ukazuje abnormalne hodnoty je potrebna ich vymena aj ked je to dost zriedkave ze treba menit naraz oba... skusil by som ich odpojit a pripadne skusit precistit.. :)
@@michaladamec1618 Bohužiaľ ja som bol ten prípad, kedy som musel vymeniť obidva snímače 😂
@@2693andry dáš mi kontakt?
@@TheFrancak co potrebuješ?
@@2693andry vypisuje mi diagnostika chybu 19226 filter pevných častíc rada valcu 1 a P200200 efektivita na spodní mrzí, čo mám robiť? Vymenil som ľavý snímač tlaku výfuk plynov a nepomohlo
Vymenil si obidva senzory či len ten jeden ?
Ktorý senzor je treba meniť?
@@TheFrancak treba vyskúšať, ja som musel meniť obidva
@@2693andry ja som dnes vymenil ľavý ale chybu mi vypísalo zas, ako si zistil ze potrebuješ meniť oba?
@@TheFrancak prehodil som ich a sledoval hodnoty cez diagnostiku
أحسنت
Golf 7 Gtd 2.0 Liter Diesel
Ahoj mam Golf 7, 2.0, 110kw ,2014
Na mojom golfe mam len jeden z týchto ventilov keďže nemám blue motion. Mal som zlomenú "trubičku" vstup do ventilu na ktorej je hadička, auto raz za čas vyhodilo kontrolku motora ale po vymene som to nedal na diagnostiku. Takze teraz mam otázku okrem toho ze treba vymazať chybu, treba ten ventil aj naučiť kedy sa má otvorit alebo nastaviť nejaku tu jeho reguláciu aby správne fungoval?
treba cez diagnostiku pozret ci sa vytvoril "Readiness kód". ked sa vytvoril tak je vsetko v poriadku.
@@golfwagen4173 ďakujem toto som potreboval vedieť 😉
hello, I just changed my EXHAUST PRESSURE SENSOR G450 on my vw golf 1.6 tdi 110hp 2014 , after a vcds scan , everything well till I needed to to the adaptation with vcds , I went to engine block to do the coding but the CODING II - 11 on my vcds is greyed out and and I don't have acces there....any ideeas why is that??? can anyone else help me with these problem???
Aceiasi problema o am si eu. Ai reusit pana la urma?
@@PumpKinLand am mers in service si dupa o verificare eu am pus senzorul bun in loc la senzorul bun si pe cel rau l-am lasat ... de asta nu am reusit eu , rookie mistake ... a inversat mecanicul senzorii si a mers ... nu a trebuit adaptare ... isi face singur mi-a spus mecanicul... nu am mai aparut eroare dupa asta ...
@@ondragho thanks
@@ondragho Salut . ce fel de eroare ai avut pe VCDS P2002 00.?
@@PumpKinLand Salut ce fel de eroare ai avuta pe VCDS ?
Cum ai rezolvat problema ?
Verey good video
Nice video friends...
Zdravím mne vypisuje chybu P200200 efektivita na spodní medzi, ktorý senzor by som mal vymeniť keď tam mam dva? Jedna sa o golf 7 1.6 tdi BM
Vymenil si ten senzor?
Zdravim.Mam istu chybu p200200.Ktory senzor ste vymenili?
Senzor :D
cesky prosim !
Problème fap
Ķ
Hello , i got check engine light hooked on friends vcds , i'v got 4.1 v constant voltage on differential preaaure sensor , when trottle to full or no trottle . Can that cause error ? Thank you