I really appreciate your quote expertise in this controller programming and showing me how to program every setting even though you don't know what the hell it does I haven't gotten that far yet though I'm still emptying the jello out of mine. Thank you
Hi, thanks for your explanation. I bought the same kit and it worked! but now I have E-10 it doesn't allow me to speed up. If you have the answer please answer me!
Have you stuck with these settings? If not can you type out the setting you choose for each one. I’ve got mine set just like yours in the video but just wondering if you have played around with different settings and found something that worked better for any reason. If they are different please reply with what yours are now.
Hola buenas amigo!!!, he conseguido hacer arrancar mi Bird con una bateria de hoverboard, pero me da un error E07, es normal??? He salido a probarlo pero se para a cada rato, en cuanto tiene que hacer algo de fuerza se para de repente... sabes que puede pasar??? Muchas gracias por tu ayuda.
Yes they should work thats why they have the 2 wires for relearn procedure to adapt any motor and for the speed accurate you need to set the right parameters
Hey Sam first of all: thanks for your video and great help, getting the crashed bird work again. But! There’s something wrong with the 3 MotorHall cables (blue, yellow, green). I had to change blue with yellow, otherwise the motor turns backwards. I have the same controller and display, too. Maybe the guys in China had it made on mondays 😁 ?!
Just converted a Bird 590 with this controller, and it behaves strange. Wheel ist always spinning with 2-3 rpm, only in full throttle it stops. When you release the throttle, it spins again. Not top speed, just in a few km/h. Any suggestions? Wiring is fine, throttle is original Bird 590.
I checked several times, all fine. Motor all colors 1:1, Batt has Bypass and worked, Brake and Throttle are fine. Weird is, that the Speed of the Wheel is always same, only stops when I push throttle. It does 9km/h, never more, never less. Strange…
Hello . I made all the connections as in the video and all part of the display turns on and I set everything as you said in the second video. but after 10 seconds and the display runs out of power and everything stops
have a problem with this display when I turn on this screen appears with 4 0000 and I cannot make it work because I do not know the code can you help me please?
Well is supposed to change when you press + or - if they dont do anything most probably is bad those thing are cheap Chinese parts and they came bad very often
Hello , how are you. I come back to you because I have an E10 error that appears on my LCD I dismount all the scooter but nothing nor made the error E10 continues to appear. it's impossible for me to get in yet everything seems to work
@@Acavando hello, thank you for your answer. But I do not understand what son exactly I must solder ?? I have to weld all the sfils connected to the controller is it? thank you
Hi sam In your video you set 9 for p13 Is that still the value you use Because in the datasheet they say 5 , 8, 12 if I understand well Thanks for your help once again
Hi sam I have p13 setting to 5 as you suggested. Ans the motor is less noisy. Thanks But the shut down problem still occurs . Do you have another idea ?
@@cryptomanu9994 at this point the only thing you can do is bypass the bms ground cable but you need to open the battery and is real hard to open that battery i have a video about open that battery is a mess but maybe they help you
hello, how are you thanks for this great video I have a problem with the scooter that goes out of the way that I put the speed on 5 will you explain to me why?
My friend bought seway ninebot control board motherboard kit for kick scooter ninebot es1,2,3 and 4 is this can work??and also got a Bluetooth circuit board hope you can help us ???thanks much;)
samzoneworld I’m just wondering if it’s gonnna work to replace the system for lime gen3 ??would you mind if I ask you to contact you privately ??its kinda hard to explain everything here, If that’s ok to you?thanks!
Hey i do it like you in your videos but i got a problem when the scooter stands in the air i can give full throttle but if i step on it after 2 meters it will shut completely off and let it only turn on after i put the charger in whats the problem i hope someone can help me
@@samzone8920 bro one question left i have the bird 590 from germany and my lights cable are 3 Black white and red where do i have to connect these :)?
@@anilobama8841 those 3 wires are the same for all bird scooter you need to watch the complete video very careful because is all there if not in one video keep searching in my other videos i know is somewhere in those video about how to connect the rear light and also you need a voltage stepdownload
So everything works but the motor makes a loud grumbling sound on take off...sort of the same sound they make when the motor is bad...I hooked it up to another scooter that made the same sound...not sure if it’s a bad thing or not....speed odometer is p18 not speed limit...if you notice your odometer is saying you are going faster than you are you adjust this down until it matches up with your actual speed
Thats the phase cable connection that are wrong combination the sound is because the firing order is wrong because the wrong phase cables combination change it on to they work good
Which ones are the phase cables...? It only does it on take off but I’ve adjusted the settings and was getting very good speed..I followed your video step by step..
@@darexg got the same problem. Had to change blue hall connected to the yellow, otherwise the scooter turns backwards?! But now, got E7 too, scooter works until it reaches maximum power. Any ideas how to fix it? Thanks!
@@RotineQue Self learn is activated by connecting the two green wires on the controller with the power off. Then turn on the power from the LCD panel and the front wheel will move slowly as it detects the phase of the motor. If it turns the wrong way, disconnect and reconnect the green wire with the power on - the wheel will turn the other way. Once it's turning the right way, dont touch anything and let it run for 10 seconds or so, then then turn off the power via the LCD.
Love you work, nice to see another mechanic
Thank you so much man !! Your really skilled
muchas gracias desde Berkeley California
Thanks for everything 👍 everything is working properly...
good to hear that
Thank you from Paris!
I really appreciate your quote expertise in this controller programming and showing me how to program every setting even though you don't know what the hell it does I haven't gotten that far yet though I'm still emptying the jello out of mine. Thank you
What is the speed controller and lcd did you use and where can I source this thanks 🙏
Thanks for the info, where did u buy the LCD from?
Hi, thanks for your explanation. I bought the same kit and it worked! but now I have E-10 it doesn't allow me to speed up. If you have the answer please answer me!
Hi I've been watching your videos but I can't find what controller to use the link is no longer there
Hey I have the same setup just wondering what you do for the brake reminder light that comes on? It stops the scooter when your riding
Did you fix it? I have the same problem… scooter stops and shuts down on level 5 at maximum power
Bruh your a fuckin genius. Love your tutorial video.
A way to replace only the controller without the mothercard , for bird 590 ?
Ysuper
Have you stuck with these settings? If not can you type out the setting you choose for each one. I’ve got mine set just like yours in the video but just wondering if you have played around with different settings and found something that worked better for any reason. If they are different please reply with what yours are now.
there is not much important things to do with those setting my setting are fine
I’ve wired it up and the wheel spins very slow tried it on two and same outcome any ideas
Nice videos. I watched them all. Where did you learn all of your electronics skills?
where i grow up my neighbor was a electronic engineer and show me few trick that was long time i go i was a kid by that time
@@samzone8920 I did everything you said on the video but now it’s going in reverse
I changed the settings on the side THL 5 and now it’s faster but still not correct yet...I’ll keep messing with it
Bonjour je peut trouver ou ce faisceau svp ?
Hola buenas amigo!!!, he conseguido hacer arrancar mi Bird con una bateria de hoverboard, pero me da un error E07, es normal??? He salido a probarlo pero se para a cada rato, en cuanto tiene que hacer algo de fuerza se para de repente... sabes que puede pasar??? Muchas gracias por tu ayuda.
This controller is suitable with hub motor geared ?? Can showing the right speed !!?
Yes they should work thats why they have the 2 wires for relearn procedure to adapt any motor and for the speed accurate you need to set the right parameters
Can you tell me what to buy and I’ll se the videos
Can I also ride on it without that controller on my steeringwheel ?
if you dont want the display on your steering then buy the controller that dont use display
Hey Sam first of all: thanks for your video and great help, getting the crashed bird work again. But! There’s something wrong with the 3 MotorHall cables (blue, yellow, green). I had to change blue with yellow, otherwise the motor turns backwards. I have the same controller and display, too. Maybe the guys in China had it made on mondays 😁 ?!
next time you just need to do a relearn procedure to change the rotation
@@samzone8920 Joh Bro 👊🏻 you mean connecting the (green?) learning plugs and just let it run for a minute?
yes
Getting error 9, do you know how to correct?
Thank you
Controller failure
Hello, a battery of lime can fit in the bird 590?
I dont know
Can I use this controller & lcd kit on ninebot max
yes this kit is for any scooter 36v or 48v
Hello,
Thanks for the video
Could you share the link for the controller to buy?
if you type electric scooter controller kit on google you will.find a lot of option they all basically the same
Just converted a Bird 590 with this controller, and it behaves strange. Wheel ist always spinning with 2-3 rpm, only in full throttle it stops. When you release the throttle, it spins again. Not top speed, just in a few km/h. Any suggestions? Wiring is fine, throttle is original Bird 590.
recheck all wires connections and then set up the display setting correctly
I checked several times, all fine. Motor all colors 1:1, Batt has Bypass and worked, Brake and Throttle are fine. Weird is, that the Speed of the Wheel is always same, only stops when I push throttle. It does 9km/h, never more, never less. Strange…
@@WDZaphod i think you have the throttle cables on the brake and the brake cable on the throttle try switch them and try again
Which model did you buy? A B or C?
www.ebay.com/itm/36V-48V-Waterproof-LCD-Display-Panel-Electric-Bicycle-Scooter-Controller-Kit-USA/312659756110?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Thanks, but im in the EU and tryig to buy off aliexpress. Ill cotnact the seller maybe he knows
Damn the page was deleted
Hello . I made all the connections as in the video and all part of the display turns on and I set everything as you said in the second video. but after 10 seconds and the display runs out of power and everything stops
did you manage to find a method?
have a problem with this display when I turn on this screen appears with 4 0000 and I cannot make it work because I do not know the code can you help me please?
Go ahead and download the manual that i put in the description at the end of the manual they tell you how to remove the password feature
Hi I have the same display but unfortunately the parameter P08 (speed limit) flashes but pressing + or - does not change it how can I solve it ??
Dont understand your question
samzoneworld the value of P08 remains at 25. Although I press + it only flashes.
Well is supposed to change when you press + or - if they dont do anything most probably is bad those thing are cheap Chinese parts and they came bad very often
samzoneworld ok thanks
Me puede dicir que comprar para serlo porfas
Hello ,
how are you. I come back to you because I have an E10 error that appears on my LCD I dismount all the scooter but nothing nor made the error E10 continues to appear. it's impossible for me to get in yet everything seems to work
@@Acavando I dismount the controller everything is ok I do not know what to do the error E10 does not want to remove my LCD screen
@@Acavando hello, thank you for your answer. But I do not understand what son exactly I must solder ?? I have to weld all the sfils connected to the controller is it? thank you
I also have the same problem
Same problem, any solution?
Did you figure it out
Hi sam
In your video you set 9 for p13
Is that still the value you use
Because in the datasheet they say 5 , 8, 12 if I understand well
Thanks for your help once again
use 5 9 is to strong
@@samzone8920 thanks I will try this setting . I'll Let you know
Hi sam
I have p13 setting to 5 as you suggested. Ans the motor is less noisy. Thanks
But the shut down problem still occurs . Do you have another idea ?
@@cryptomanu9994 at this point the only thing you can do is bypass the bms ground cable but you need to open the battery and is real hard to open that battery i have a video about open that battery is a mess but maybe they help you
@@samzone8920 as I have the same problem with another battery, do you really think this is the source of the issue?
Lucy you got some explaining to do
hello, how are you thanks for this great video I have a problem with the scooter that goes out of the way that I put the speed on 5 will you explain to me why?
you need to bypass the bms
@@samzone8920
can you explain to me how to bypass it thank you
hello I do not know if I expressed myself well but my scooter goes off after two minutes is it normal or can you explain me thank you thank you :-)
BMS
@@victormongain7846 make sure all connection are good and if all is good you need to bypass the bms
hello there??Im just wondering if you can help me to make lime scooter as personal use ??
my friend got lime scooter gen3??
@@bonryansoriano5257 just get a 42v 2000 watt kit system and fly with it
My friend bought seway ninebot control board motherboard kit for kick scooter ninebot es1,2,3 and 4 is this can work??and also got a Bluetooth circuit board hope you can help us ???thanks much;)
@@bonryansoriano5257 and what you want to do with the es4 sytem
samzoneworld I’m just wondering if it’s gonnna work to replace the system for lime gen3 ??would you mind if I ask you to contact you privately ??its kinda hard to explain everything here, If that’s ok to you?thanks!
I did everything you said and it it’s on reverse only why?
You have to flip the polarity
At computer
Any idea how to reset forgotten pw?
yes i have the procedure in my office computer when i have a chance i upload it here
Whats e 06 ?
battery undervoltage
My bird seems to shut down under throttle and there's error "CUR ((!))" On the mph screen. Any advice from anyone?
Need to bypass the bms
@@samzone8920 Got it. Watching your BMS Video. Thank you.
Hey i do it like you in your videos but i got a problem when the scooter stands in the air i can give full throttle but if i step on it after 2 meters it will shut completely off and let it only turn on after i put the charger in whats the problem i hope someone can help me
You need to do a bms bypass
I have a video about that
Great job thanks bro happy new year from germany👍🏻👍🏻❤️
@@samzone8920 bro one question left i have the bird 590 from germany and my lights cable are 3
Black white and red where do i have to connect these :)?
@@anilobama8841 those 3 wires are the same for all bird scooter you need to watch the complete video very careful because is all there if not in one video keep searching in my other videos i know is somewhere in those video about how to connect the rear light and also you need a voltage stepdownload
So everything works but the motor makes a loud grumbling sound on take off...sort of the same sound they make when the motor is bad...I hooked it up to another scooter that made the same sound...not sure if it’s a bad thing or not....speed odometer is p18 not speed limit...if you notice your odometer is saying you are going faster than you are you adjust this down until it matches up with your actual speed
After take off and the scooter picks up speed the sound goes away
Thats the phase cable connection that are wrong combination the sound is because the firing order is wrong because the wrong phase cables combination change it on to they work good
Which ones are the phase cables...? It only does it on take off but I’ve adjusted the settings and was getting very good speed..I followed your video step by step..
@@jimmychafins big 3 cable from motor and controller
Are the phase cables the large 3 that went to motor..?
i was riding my scooter and it stopped and it’s not going and E 07 is on display
that code is for motor failure
its hall sensor error. check your connections
@@darexg got the same problem. Had to change blue hall connected to the yellow, otherwise the scooter turns backwards?! But now, got E7 too, scooter works until it reaches maximum power. Any ideas how to fix it? Thanks!
i forgot my password how to unlock such a displey what can i do for help
i will send you the instructions to fix your problem give me a bit of time
ok so you need to put 3745 and hold the button for 10 second that will do the trick
Why dose wheel spin backwords
Exactly, why does it spin backwards? Help please!
@@tubefr71 justbridge the learning wires and turn on. google it
@@RotineQue Self learn is activated by connecting the two green wires on the controller with the power off. Then turn on the power from the LCD panel and the front wheel will move slowly as it detects the phase of the motor. If it turns the wrong way, disconnect and reconnect the green wire with the power on - the wheel will turn the other way. Once it's turning the right way, dont touch anything and let it run for 10 seconds or so, then then turn off the power via the LCD.
Danh Pham does it really work? I’m gonna try in a few minutes.. mine is going backwards too
Yes
Why they aren't any video of bird one review??? There are only stolen bird scooter hacking videos!!!!
Don mi nombre es mando soy de oxnard cal. Ocupo su ayuda tego dos scooter bird y no puedo aserlas jalar si quere contactar le pago
Lol is my bird scooter the only one that drove backwards after wiring it all together???? My shits doin wheelies
You need to do a relearn procedure to fix backward problem
Where did you get information on the relearn procedure? Same thing I got.
@@mikerak7473 i just figured out onetime i was lost with the backwards problem
You know how to do it?
@@samzone8920 I dont Sam, I keep going through these conversations as I hate bothering people when the info has been posted somewhere.
You dnt know what your doing mate
No i don't you do a video about this smart dick