How To Make Custom Brake Lines For Your Motorcycle
HTML-код
- Опубликовано: 12 май 2021
- This video is brought to you by: www.lowbrowcustoms.com
In this video, Todd walks you through the Goodridge product line of brake lines, banjo bolts and banjo fittings we just started carrying. He also shows you how easy it is to install a brand new line with new fittings on a crusty front brake set up from a 2003 Sportster project we are currently working on. Wether you got a small master cylinder or caliper leak or you just hate the rust and corrosion on your brake line. These Goodrige brake line products make its super simple to change out that old brake line in no time at all and with minimal tools. Take old lines off, install new fittings and new line, bleed brakes, test brakes and go for a ride looking better than ever! It's that simple!
Find the Goodridge line of products here: www.lowbrowcustoms.com/collec...
All Music licensed by: Artlist.io 
Авто/Мото
The bloopers are golden! I wish there was a whole video full of Tod rage-rants. I'd pay money to see that. lol!
I can't thank you folks enough for making this video. Harley wanted to charge me hundreds to do this when I said I wanted to put taller bars on. Your explanation of the parts and process was exactly what I needed. Thank you so much!
HELLL yeah! thats what we like to hear! hope it works out well for your bars and happy riding!
Been using this style of brake lines for a while now. They are amazing! Only tip I think you guys missed is to have the suspension unloaded when measuring lines!
You’re a legend !!! Thank you
Also no reason to evacuate the fluid in the master through a brand new empty line
The end of that was the most relatable sh*t ever. I too hate brake fluid...
Great video. 🤘
This vid just showed up on me channel. Strangely enough I just did this to my obscure BMW. The factory hose is no longer available and I found these at Lowbrow Customs.
I ordered the components I needed, two days later they're in my mailbox. 15 minutes in the shed and I have brakes again! Todd knows!
Great video
I’ve been using these lines for years they are excellent. I find using 5/16 fuel line works best to figure out length it bends very similarly to the braided lines.
That’s what I did, I had it on hand!
Your ability of explaining the whole process in a way that I can actually understand exactly what the hell you're talking about is amazing! Keep up the awesome videos and thank you for the knowledge.
To bleed the brakes on my bike ,i pump the brake lever then put on an elastic band on the lever to hold it closed ,one man job 😁
Take care on the road, peace out ✌
He says almost exactly what I say while wrenching at least once a day.
Thank you for these videos. I have a project bike I will be working on soon. Gives me plenty of ideas 💡😃!
As a former PhD technician I'd recommend cleaning the m/c out prior to installing the freshy lines. 2003..?? Probably time for a m/c rebuild. Don't forget to clean and lube your caliper slide pins. Those fixed calipers were not great.
Great video overview. Thank you. I see these in my future!
Gonna need to rewatch this a couple times. Would be nice if there will be a rear brake line video follow up
It's the same process just on the master cylinder at the rear
@@PkwyDrive13 good deal. Just need to measure what length lines that I need. I appreciate it
@@jhall19k45 👍👍👍
Howdy LowBrow,
Thank you for walking us through the PROCESS
COOP
...........................................
I could watch over and over! Great one sir!!
Nice snap-on screwdriver, It's to bad I can't steal dads anymore!
Thanks for the great videos, will be ordering parts for you guys
suuuuuuper informative. thank you!!
I love this company!
we luv you too! thanks for the love
Measure with front shocks fully extended.
Todd..you da man!
Would love to see Prof. Todd do a choppy style wiring demo.
Thanks for this demonstration. I have a 2012 Suzy V Strom which is equipped with the worst crap of an ABS module. I stomp the rear brake and it locks up and won't release. So I'm gonna go old school brakes. I'm 64 and been riding since I was 15. Never cared for ABS on a motorcycle.
Should a little loctite be applied to the male fitting's threads to prevent loosening? Thanks.
Great video! Can you guys do a video on replacing the mounting gasket on a 1994 hd xlh883 speedometer?
You should be abled to remove a few screws in the back if the speedo mount, remove and unplug speedo from wiring harness with one plug, remove backing of speedo and take ring off, then replace gasket, and rubber and put back together. pretty straight forward job.
They make fittings for lockheed calipers? Or what do u run on an old triumph with disc front brake
Hi Todd great video. I have a 2015 triumph rocket roadster abs and I melted the rear brake line I have tried to order the correct part and triumph
Uk can't even get it. I'll would love to order this system from you I'm overseas at the moment on job and can't measure the fittings I would need to order Im sure you have better things to do 😂 then to put together what I need but if not I sure would appreciate it. I could order and maybe install as soon as I get home get a little riding in before winter. Thanks for the videos.
Can you swap a new banjo onto a stock line?
Can this work with hydraulic clutch systems as well ?
at the handlebar brake master cylinder, if you are installing a 90 degree banjo, is it a bad idea if orient the banjo in such a way that the brake line is higher than the bottom of the master cylinder? thanks
years late but is there a link for the brake bleeder tool? I looked everywhere and I got nothing.
Will these work with abs bikes?
I want to know if I can remove the anti lock breaking on my street glide. It's frozen and the thing can not be fixed? 🇺🇸🇺🇸
You would have to delete the anti lock module completely to by pass it. You could also just do completely new brake lines and use stuff like this Goodridge line. This video from this dude ,ruclips.net/video/9ru8O62A_A0/видео.html explains it well not sure if what year you bike is what they all look like etc. But it can be by passed. Biggest thing is you need to make sure you bleed them and test they work before ever going for a ride.
Hi everyone, at 9:20 what is the hose used to connect from big hose to small hose? I need the name and the size that it converts to... Thank you...
What tires are on that bike if you know
For some reason Russel doesn't sell any brake lines with male fittings, while most of the lines I wish to replace have a male on at least one end. So, you end up buying a bunch of adapters and end up with a clusterfck. You can find lines with a banjo on one end, but for some reason the banjo is thinner that the one on the stock line, so you end up using two copper washers on each side. I've also run into a similar problem with their 3/8" banjo brake switch. The threaded section is too long for a motorcycle master cylinder.
very good video todd. i have a 1971 FLH with a stock rear juice brake (all parts now are stock but not original). will the goodridge parts fit the stock master cylinder and wheel cylinder?
You have to check your banjo bolt and banjo fitting sizes and if they are same as what we carry then yes they will work. We have a wide variety of sizes but Not sure off hand what size a 71 rear juice brake has, Best way to find out is measure yours.
How the heck did RUclips know I planned to run custom lines in my bike? I didn't even search for them. Scary 😨 Great find though!
What about old Harley’s with flair fittings?
What are benefits of such "custom" brake lines vs. those without the fittings, made of with just one piece?
just easier to route and mount up.
Todd always makes me laugh, great guy! If I weren't so far away, I would order from you... Who sells your parts in Germany?
WW cycles sells a handful of our parts
I was on your site looking at your Goodridge brake lines. Good stuff. Hey, why was looking is because I am trying to make a longer Kawasaki OEM part (43095-0849) that goes to my hydraulic clutch, because I installed bar risers. BUT I can't find anywhere to find that two-way fitting that it has. Are you able to get that fitting? Cuz I know I ain't the only one that can use this! Thanks! 👊💯
have you tried reaching out to our Tech support they are available 8:30-4:00 EST monday-friday if they can't find it they might be able to point you in the right direction. 1800-935-5050
Would you run a soft line all the way to the back the same way? Or run a hard line?
You can use these lines for the back as well.
Any ideas on the abs models...I hear you need harley to bleed the abs bikes with a magic tool/device? Is there away to raise your bar, change brake lines without having to get them to bleed it? 2017 dyna lower s is the bike in question. Cheers
You can bleed them but your systems is going to error, it's best to go to a shop that has the computer and can do it right. Annoying but better to be safe with the one thing that stops you... A lot of guys we know have deleted the ABS from the system completely and just run standard brake lines on those Dynas
@@lowbrowcustoms thanks for the reply guys. Much appreciated
Has anyone done this with dual disc yet? A little confused on what fittings to get
Hit up todd on our tech support line - 1800-935-5050 and he can help you out and get the right parts. just make sure to give him all the info on what you are working with model wise etc. Cheers
Ada kah yg menjual mesinx sja 2 slinder
About 8 months late to the party here, but great video as always Todd. BUT! It's not as good as your recent sportster Saturday front fork fiasco! Made me spit out my coffee. Lmas. Anyway I fashioned a cool bleeder system with my hvac vacuum pump. Kinda like you described, using 2 hoses running to a "catch can" if you will, one hose submerged in the fluid the other up high above fluid level. Worked. Like Russell speed bleeders to. Btw have you ever used Russell pro system ll nylon lines and fittings? The ones with the ferrel type compression (olives) fittings??. Just wondering as I am considering them. Sorry for the long winded rant. Thanks again for what you guys do
no we haven't used those that I can recall. if someone does here we will reach back out. Thanks for sharing. cheers.
What about bikes with dual calipers with that puck/splitter thing? Do you have those to build custom lines?
still waiting on them to come back available but will have soon. Yes you need a splitter to do dual disc
You can get a double banjo bolt for the master cylinder and run two lines from it.
Or you can put the double bolt on one of the calipers and run a link line to the other one.
Hydraulics balance out so both calipers get the same pressure however you plumb it up
Hmmm 13:00 be sure to add half the stroke travel of the front suspension when selecting the line. If this bike only has .250 extra, I'd not want to see it hit a bad pothole (or wheelie).
Sorry, what was the brand of the brake line and hardware?
Goodridge - www.lowbrowcustoms.com/collections/goodridge
Just picked some of these parts up. So you literally just screw the banjo fittings into the universal line and that is it?
Just make sure your sizes are correct for your banjobolts make sure to use the crush washers, bleed and test brakes, check for any leaks... go for for a ride
@@lowbrowcustoms thanks for the thorough reply! I got my new line assembled, bled and tested. Line was leaking where the banjo fitting screwed in, but it's tightened up and working now. You've really got to thread those in tight! All in all super straightforward!
Im looking to bypass my broken abs system
Rear brake vid pleasee
oh no dont melt the shoes bud!
@@lowbrowcustoms so is this not recommended for the rear? I’m in die hard need of a brake line and of course my 2002 softail is “old” and they would need to order a aftermarket so I’m looking at theses as a alternative
🤘😎🤘
Thank you for educating me! I'm a new supporter of a 1% club and to learn things so at least I have an idea what they might be talking about.
38" cause sag n strap
You will never know how much g** d*** it mikeyhas changed my day
ah shit.. i want to make my own brake line LENGTHS.... i don't want a line with metal fittings already attached. does anybody sell a kit? where you can make your own LENGTH of brake line? and crimp your own fittings on?
On car,yes, on bike ,no thanks 👍
I don’t know why you didn’t just convert to AN fittings WITHOUT banjo bolts…
Trying to show people how easy it is to use the Goodridge lines of parts that we carry on our site. Theres plenty of ways to skin a cat... we just like this way.
Not to sound like a hater (I've ordered stuff from you guys), but:
You keep calling the brake cylinder the master cylinder.
I watched this hoping you were going to actually "cut" brake line and attach the fittings.
All you did was install ready made components. Heck, anyone can do that!
Well not everyone knows about these great kits and it takes out all of the non sense of having to cut them and re-do them. Just easier and less mess.
I think the title should be how to install a brake hose not build one