Sheet metal tutorial | Gusset design & punch form in Creo Parametric
HTML-код
- Опубликовано: 7 ноя 2019
- Sheet metal gussets are provided to avoid unbending the Sheet metal part under load conditions.
In this video, we will learn how to design a gusset in Creo parametric. Here, we will design gussets in different conditions, so let's design sheet metal gussets in Creo Parametric.
Join this channel to get access to perks:
/ @cadxtraining
Basic sheet metal tutorial for beginners in Creo Parametric
• Sheet metal tutorial |...
Playlist:
• Part Design in Creo Pa...
• Complex part design in...
• Sheet metal Design in ...
• Surfacing in Creo Para...
• Assembly Design in Cre...
• Detailing the drawing ...
• Gear design in Creo Pa...
@CADxTraining #CADxTraining #CADx
/ @cadxtraining
/ cadxtraining
t.me/CADxTraining
You just explain it really simple. Love the way you take us through. Please keep making more videos sir. Great fan :)
Real way of teaching
Great explanation and good naration
You're the best!! Keep up the fantastic work!
Thanks
Very well explained.... We can easily understand appoch to get result and thing to remember while making it.
Sir ur good explanation is learning very well
very good knowledge transfer. Appreciate your skill.
Keep on sharing your knowledge
Thank you for uploading
Thanks for the video. Well explained. Please make more videos on creo.
Superb and helpful
Very helpful videos....
Sr ur teching is awesome....u tech step by step point on that...it helpful to clear our doughts
Is it mandatory for one to consider factoring in laser kerf while designing for laser cutting parts
Sir , I am using creo 5.0 , After using falnge command , shape ~Sketch option not available , previously I used it , is there any change we have to do sir , for editing sketch option
thank's a lot congratulations
@cadx.. How ill you place the 2d drawing on model tree area... How?
how to add image as you did in bottom left corner
Blanking, piercing, forming, embossing......tools design .. with drawing
Sir after changing punch direction feature failed to regenerate appearing on screen
Please make video for Full press tools design
Show how you have created family table
In my creo don't show bend position/bend line option.
Sir can you please upload a video regarding k-factor & BA.
thanks ,
3:40 , how did u bring that toolbar to select outside flange
Look for the bend option tab or offset tab on your screen
thanks
You're welcome!
In that flange command how to go bend outside?
same is the Q here too!!
3:40 how to get that Bend outside command?
Which version of creo are you using?
how you show planes with shortcuts?
Create a mapkey
could you please teach me how to create a punch with draft tool and also family table. thx 4 advance
For that you need to join the training class here
Please Send me the Sheat metal drawings
Can you please arrange the videos According to a certain order ..where we can binge it
For that, Go through the playlist.
@@CADxTraining playlist Is jumbled up..atleast u can edit the names with number at the end.. but yeah it's upto you.. you have done so much..thanks for that
sir in creo 7.00 material removed option doesn't open in extrude how to open that option sir
Can you write down the video timing?
@@CADxTraining sir you used extrude command and put a hole that timing sir
I got your question. Actually in creo parametric 7.0, you have extrude cut as a separate command. So you need to use extrude cut separately. you cannot use it within extrude.
@@CADxTraining thats it sir thankyou so much
Hello sir!... At 3:41 you are add a BEND OUTSIDE command. I'm using creo 5.0 how will i use that feature sir?
This option is there in Creo 5.0, you just need to search in the tabs.
May you please explain which tabs sir... I cant see that option on my flange creating panel.. if it possible please say this thing in your next video
Inside the flange, you have offset tab.
@@CADxTraining it's in like 1.add to part edge 2.Automatic 3.By value. I'm right sir?... Thank you...
How do you define the height and length of the gusset?
Wiil you pls explain it with new video?
It's as per the reference part placement
@@CADxTraining thats why i need some guidance on that
I can't able to create it as per given dimensions.
So please make video on that or provide some guidance.
If you will allow me to share some data or some content then i will provide you.
If you have already then pls make video tutorial on that.
This will help you a lot.
ruclips.net/video/kUXe-uPZ-0o/видео.html
@@CADxTraining thank you sir
May possibly will help me.
How to bend the flange outside sir ?
How to get that pop up menu
This is available in creo 6 and 7
@@CADxTraining so not possible in creo 5 sir ?
@@CADxTraining SIR HOW TO ENABLE IT IN CREO 7.0
In creo 5 or less, you can do that by clicking on offset tab while creating flange and check the box to choose 'add to part edge'.
Sir could you please share the link of previous video cause I'm a beginner in sheetmetal
I have completed solid part
Which video are you talking about? Can you mention the time stamp from this video if you know?
The link is given in the comments section.
@@CADxTraining sir the first video about sheet metal that you mentioned in the beginning
@@CADxTraining sir one more question I'm using creo 8.O and is it different from the one which you are using?
Check the link in the comment section. I have used Creo parametric 6 for this video. Overall both versions are the same.
Can we use this ruclips.net/video/8h006J1-m8A/видео.html method
for the replacement of Gusset punch
Yes you can use it. But you can do even better. Just watch quilt form from this link to understand it better.
ruclips.net/video/kUXe-uPZ-0o/видео.html