Hello, than try with an air powered impact wrench, it is sometimes better for this work, just try it. If not works, you can hold the inner part with some kind of tool from the opened side.
I have also opened my fork, I notice that on my right side this phone ring is missing in the groove as seen in the video at 05:20 I only have this ring on the left side. Is that ok or is there a ring on each side?
@@latzkoworks thanks for the answer, one says so and the other so. On an exploded drawing I see no rings and no sleeves at the bottom. Do you know where to buy them or what the name of the sleeve or ring is?
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Hey, what is that for a Grease? That Purple Grease?
Thanks for sharing this Video Sir.
Hello, nothing special, it is Mobil SHC100. Thank you for watching!
4:45 i cant open that bolt, it turns infinitely with the interior tube! Any idea ?
Hello, than try with an air powered impact wrench, it is sometimes better for this work, just try it. If not works, you can hold the inner part with some kind of tool from the opened side.
@@latzkoworks thx for the reply, tried both methods and same result, I think I will just drill it and replace the bolt..
I have also opened my fork, I notice that on my right side this phone ring is missing in the groove as seen in the video at 05:20
I only have this ring on the left side. Is that ok or is there a ring on each side?
Hello, this should be in each side. The innear parts in both side are the same. You can buy this ring at the local bearing shop.
@@latzkoworks thanks for the answer, one says so and the other so. On an exploded drawing I see no rings and no sleeves at the bottom. Do you know where to buy them or what the name of the sleeve or ring is?
@@Wurstsuppe100 you can buy that bottom part just simple from an Aprilia dealer.
Which side did you put the oil seal in, spring up or spring down?😊
Hello, with the sping down.
How much oil did you put in one shock absorber can you find out ?😢😢😢
Hello, as I remember it was 0.1 liter each side, 10w.
Masterclass
Thank you!
No need to remove the top bolt. Only unscrew the lower unbraco bolt, then you can easily remove the forks from the tubes.
Thank you for the advice!
ola qual a quantidade de óleo que usou obrigado em mil
Hello, 0.1 liter 10w each side.
Ola, boa tarde amigo
Sabe me dizer a medida dos retentores?
Tenho uma Aprilia Rossifumi 1998 SR 50 👏🇧🇷💨💨
Hello, what do you think exactly?
How much oil did you put in the front fork? and how many W?
Hello, it was 0.1 liter to each side 10W.