Finding Manufacturer specific PID's with ghidra. + speedometer correction. DENSO sh7055/58
HTML-код
- Опубликовано: 12 сен 2024
- see my website for a step by step disassembly of this ECU. www.ghidrauto....
SAE PID's alextc44.blogs...
denso sh 7058/55 processor.
isuzu NPR 5.2l 4hk1.
LET ME KNOW WHAT YOU GUYS WANT TOO SEE MORE OF!!!
go spam LIKES,follows, and comments on this guys YT RE videos. we can learn way more from him then me!
• Nissan ECU ROM reverse...
Can hacking. Canbus. Tuning. Flash. Rom. Romraider. Ecu flash. PCM flash. Winols. Ecm titanium. Alien tech. OBDX. Isuzu. Denso. Diesel tuning. Maps. Mappack. Speedometer correction.
Great stuff!
It gives me hope that someday I'll be able to dissassemble my SIM2K ecus.
Still a long way to go though! I'm still way better in winols
Hardest part is getting the ball moving. Then it slowly falls into place
I'm guessing the 3600 value at 9:00 in the vid is one hour (60sec x 60)
That’s interesting. Likely! Thank you.
nice bro
thanks for information
For sure man.
@@GHIDRAuto could you please make a video of start using with ghidra and setting of it
from start to end
so that i can do homework from beginning
thank you
@@steveswilliams7341 ruclips.net/video/fZAmQVCgZRs/видео.htmlsi=F90dLvASKc9Gv4GB this is starting a new project. Something more specific? Have you watched my other videos?
@@GHIDRAuto Ohh Sorry
I seen a lot of your videos but i forget this one LOL
thank you i will do as your tutorial
if i have something to ask
which way can i contact to you
telegram?
whatsapp?
Sounds good
Hey man just played warzone with u broski and im pretty interested in what u do!!
Oh no! lol don’t judge me by the shit I talk on warzone! “The two worlds have collided” legit getting canceled, pending now lol it was good games man!
@4:20 if thats the isuzu, its because there are two speed sensors. A primary and a backup
But if you found the speed PID, think you could adjust for different gearing?
Nm... You answer at 7:30
I would like too agree with your logic about the 2 speed sensors, however both speed 1, and speed 2 are unquestionably being written by the same value. If you are who I think you are. I Dug through our 06 wiring diagrams, and unfortunately the speed sensor is wired directly to the Speedo. The 07 dpf trucks and newer are communicating speed via canbus, so their speed could be manipulated via the 3600 value, or the 1.6xxx value.
I could attempt too read the Speedo’s processor if it has one. Take yours apart and see if it has a micro processsor or just a chip? Might find a potentiometer or a resister could do the trick
@@GHIDRAuto yeah its me, idk i remeber looking up the VSS stuff a while back but kinda came to a road block, then lost interest. But if its a hall effect VSS, then it will be algorithm based... Probably
Copy. Well, if it has a processor, maybe I’ll try to read it.
Genial genial... Thanks
I want to adjust my cruise control tables. Have you found them or is it tied to the injection quantity like speed limiter
I’m not actually a tuner. This is my first time, so I don’t have any knowledge of how the cruise control tables work. However in the 4 denso ecus I have looked at. Isuzu, Nissan, and Suzuki. I have been able too find the sensors, or switches by finding their dtcs “ckt hi, ckt low” and then tracking down the inputs from there. So I guess make some assumptions on what could be your cruise control tables, label every ram address’s(or rather functions that handle them) associated with the cruise control, ckt hi lo dtcs, obviously also brake pedal. and then start tracking them too eachother
Bro.... don't be tellin' 'em everything. 😂
lol just making this shit up anyways man. somebody should hire my just so I stop making these videos 🤣. but in all honesty I have nothing but clues, not proficiency at all.
@@GHIDRAuto Come find me. I wanna show you some stuff.
@@GHIDRAuto
M
S
G
M
E
O
N
F
B
O
R
I
G
@@GHIDRAuto Hmu. I wanna introduce you to some folks.
@@GHIDRAutothat's really cool Man, we do the Same stuff on Ghidra all the tiME.
Check the capital letters ;)