neon yg di indo beda2 tebelnya, biasanya dipasin dengan tebel neonnya. neon masih fleksibel jadi akan perfectly fit walaupun di groove nya dengan tebal yg sama. untuk depth groovenya 30-50% dari tinggi total neon. makin dalem groove makin perfect bentuk neonnya, karena kadang masih agak bend yg bagian atas kalau lekukannya extreme.
@@PreciseSigns Great...the reason I ask is that I saw you cut the neon wherever you wanted, not at the marked intervals. So I thought how are you going to wire/solder the ends if you've chopped to much/too soon (not at the intervals)?!? I'm new to this, so just wondered. Thanks
@@PreciseSigns thanks for that....this explains then when I saw what appeared to be an extended piece that you stripped back to fit the lettering- the sticky out bit was, I guess because that is where you could cut up to then hide it away. Appreciate the replies.... and look forward to watching your other vids.
Hello!! Could you tell me what material is the base, is it acrylic or what other? And what is the name of the program you use to make the model on the computer? Greetings from Argentina!!
@@PreciseSigns Ohh thanks! and to pass it from the program to the PVC plate, how is it done? I mean, what kind of machine do you use? 3D printer? Sorry if you don't understand me, I'm using google translator xD 
Just for information: 220V led neon only cuts by 1 meter. 12V led neon by 2,5cm.
Welcome
Why are you stating this?
@@PreciseSigns somebody asked about where to cut. few people knows this. Just to help people to get a knowledge.
great job
Amazing 👍👍👍
Thank you! Cheers!
Do you have a link where you purchase your neon from?
Nice👍
Thank you! Cheers!
A video of ur home made CNC would be awesome !
sorry i didnt start recording videos then
Hi, greetings from Indonesia. could you tell me please the wide and the depth of the groove so it couldfit the led neon perfectly, thanks
neon yg di indo beda2 tebelnya, biasanya dipasin dengan tebel neonnya. neon masih fleksibel jadi akan perfectly fit walaupun di groove nya dengan tebal yg sama. untuk depth groovenya 30-50% dari tinggi total neon. makin dalem groove makin perfect bentuk neonnya, karena kadang masih agak bend yg bagian atas kalau lekukannya extreme.
@@AbbeyRPG can you translate to english?
@@ericgeronimo833 long story short, it depends on the neon itself. 30%-50% of the height of the neon should be fine to do the job
Great. Thank you !
Where to buy that neon led strip ?
can you please tell me what font did you use
Como se llama el soporte negro donde haces el dibujo para inserrtar el neonfle
God❤❤❤❤👍👍👍👍👍
sorry i don't speak your language Google translation but I was wondering if the neon LED you buy cuts in 2.5 cm?
In Brazil only sells led with 5.5 lateral thickness and cut with 25mm with 12mm height is yours like this?
yes
Sir what do you call these light ??
Hello there. In which program do you make the drawings?
Excellent job ! can you please tell me what font did you use ?
What is the name of the materials used?
I didn't see you connect any wires to the front and how you did that. Just saw at the end preparing the end.
I dont connect my wires at the front of ANY of my signs.....
@@PreciseSigns but you need to prepare from the front to connect the wires that run to the back
@@gordycummings its the technique i use
I like LED Neon Sign.... PART1 & LED Neon Sign.... PART2.... was there a PART 3 with the wiring? Thanks
Thanks......there was a recording but it somehow got corrupted.....but i'm working on getting it back.....no promises though
@@PreciseSigns Great...the reason I ask is that I saw you cut the neon wherever you wanted, not at the marked intervals. So I thought how are you going to wire/solder the ends if you've chopped to much/too soon (not at the intervals)?!? I'm new to this, so just wondered. Thanks
@@matthep1 i actually cut them at the cut marks
@@PreciseSigns thanks for that....this explains then when I saw what appeared to be an extended piece that you stripped back to fit the lettering- the sticky out bit was, I guess because that is where you could cut up to then hide it away. Appreciate the replies.... and look forward to watching your other vids.
@@matthep1 yes.....I have to bend it back on itself because the letter stops between the cut marks......thanks
Em.muốn đặt làm dc ko ạ
Hi how do u set the text width in cnc to the exact width of neon flex ?
same question
A no responsive RUclipsr
What’s the name of the machine you use to cut the board you’re using?
It’s in the title CNC
Where do you get your led spools from?
Aliexpress
Bueno para los saques
Great job!!!! Did you make part 3?
No......video file was corrupted
Hello!! Could you tell me what material is the base, is it acrylic or what other? And what is the name of the program you use to make the model on the computer? Greetings from Argentina!!
lol.....Greetings........the material is PVC and the programs I use is Adobe illustrator and Vcarve
@@PreciseSigns
Ohh thanks! and to pass it from the program to the PVC plate, how is it done? I mean, what kind of machine do you use? 3D printer? Sorry if you don't understand me, I'm using google translator xD

@@enzol.m.2959 lol....No prob.....I have a home made CNC Router which is controlled by a software called Mach3
Can it be done with a laptop ? And then how do I get the Mac 3, please?
Can we buy this in online
Contact me at precisesigns@gmail.com
What's the name of flex light strip and where can I get it
aliexpress
What material is this and how do you make it tight fit for the led rope?
Material is PVC .....just make the channel a tight fit for the neon
can you tell me the font name which you are using in this signage?
I am one of your subscriber
Biysk Regular
Nvm I subscribed
How big is this sign
33in X 5in
Iam interested to buisness from Kolkata
like
what kind of glue do you use?
no glue ....tight fit channel
Did you buy this neon sign on neon factory?
NO.....I made it
What machine is used for it and where can I get them?
Do you make custom signs? I'm very interested
Obviously lol
@@damiencallaghan6244 lmaoo I must have had a few drinks 🤣🥴
is this Material mdf ?
No its PVC
HEY, IF I NEEDED TO MAKE AN ORDER... DO MAKE IT FOR ME?
yes contact me at precisesigns@gmail.com
How much price
Send request to precisesigns@gmail.com
Our order
hi friend, can you tell me the font name in your logo?
CNC model and cost sir?
WhatsApp on 9106585085
Or share your contact details
तुम्हारा वीडियो इंडियन लोग jyada देखते है तो हिंदी डिटेल्स बताया भी करो 😒
The names of these lights
LED NEON
1 sign price
Email precisesigns@gmail.com
Ac220v or dc neon
12volt DC
@@PreciseSigns so if vc220v can't cut like this? Oh dear I bought the wrong one 😭
@@miszzLiyana this is LED NEON which uses 12 volt (some use use 24 volt)....not the gas filled neon with uses high voltages.....
@@PreciseSigns nice! Where do you buy the LED neon strips?
@@InfiniteFragments amazon for now
jala kr to dikha...
Can I order . your address please.
precisesigns@gmail.com
please share your contact details
Mine is - +91-96805-39187
Please contact number
Whatsapp number model senting
Dont understand what u are say......please elaborate
WhatsApp on 9106585085
Or share your contact details
Contact number
precisesigns@gmail.com
Idiot
what??????
@@PreciseSigns NEON sign apple
@@fortnite_874 dont understand
👎 sorry
thanks for the feed back
how did u cut the neon strip light from 1 m or we can cut it from any where i want to buy this light pls share link
Rider, u can use the 1 cm cut or single cut neon led to do so I can cut it within 1 cm. More easy to do.