Amigooo exelente video, el pvc lo tenes q cortar antes verticalmente y lo pegas con cinta cuando lo llenas, y si es un caño de PVC mas fino mejor porq es flexible y desmolda fácilmente
WUAUUU !! CRACK !!! Mis pensamientos: ¡ OJALÁ MI MARIDITO LINDO DEDICASE UNOS RATITOS PARA HACER ALGO ASÍ ! (Y digo mi chico porque yo trabajo de sol a luna y NO TENGO TANTO TIEMPO COMO ÉL!!!!)... Saludos desde Barcelona, España
I always watch the English channel, it's quite entertaining and useful. Good luck with this one too! It's a bit strange to get measures in inches in Spanish though, so you might want to switch even if conversion is approximate only, or at least to mention both imperial and metric values (like "vamos a medir 5 pulgadas o 12.7 centímetros"). Regards.
i dont think he should worry about conversions, most tools have both values and im a weekend woodworker (just for hobby), and i end up learning measures in inches, it's just easy to know both, in fact, i guess is better to not tell people both in videos, so they get interest in learning, it's very important and very practical.
Entre a buscar muy emocionada y decidida como hacer una lámpara botella de vidrio y me encontre con este tutorial y me encantó esta precioso!¡!¡!...Pero de todo esto lo único que tengo son mi botella y las ganas de hacer mi lampara 😭😭😢
Hola, felicidades por este nuevo canal, hacia falta. Aunque no entiendo el ingles siempre e obtenido muy buenas ideas del canal en ingles, gracias de nuevo.
Todo bien pero para evitar romper el molde de PVC, usar desmoldante para concreto... o en todo caso usar aceite de cocina y embadurnar el tubo donde tendrá contacto con el concreto y listo... Solo retiran el tubo cuando esté armado el concreto empujando de un lado.
You might want to hold off on this channel - You tube will be introducing audio choice on videos soon... . if the uploder has a second, third etc audio for the same video...
Yes, i heard the same thing, but i've been hearing that for years and still no choice around... i guess it's better to hold the channel 'til it actually happens.
Hola amigo soy de Colombia no sé cómo llaman la sienta de tiempo acá en Colombia y además no sé dónde conseguirlo me ayudarías gracias por tu respuesta
It's a very cool idea this channel, because there is almost no content in this language; but being a native spanish speaker, the voice sounds a little weird. Sometimes I couldn't understand what is being said. Is this a computer generated voice? I think a real human voice would a thousand times better.
Thanks man, Yes its a computer-generated voice. I am working with a company that converts my videos. They are in the beginning stage and they feel this will get better over time. I have been wanting to do this for a long time, just unable to have a person get involved. I agree sure a person would be a big improvement.
DIY Creators Latino Sometimes it sounds really natural, like a real human voice, it has a lot of potential. I wish I could help, but I don't have the necessary tools or a good attractive voice.
I have a couple Hispanic friends but neither have interest in helping. Thank's though :), if this doesn't work out I will dig deeper to find someone to help me keep it going.
DIY Creators Latino Hi! I agree the coment below. I hope you find a person who make the off voice. It’s doesn ‘t sound fine or nice. My voice is not very nice, so I’m sure I cannot help with that. 🤐 I’m a suscriber from the original channel, it’s very easy to understand, but this will help you to reach more viewer. Greating from Uruguay 🇺🇾
Gracias por pensar en tus suscriptores latinos hay muchos que no entienden inglés y esto les facilita más las cosas.
Amigooo exelente video, el pvc lo tenes q cortar antes verticalmente y lo pegas con cinta cuando lo llenas, y si es un caño de PVC mas fino mejor porq es flexible y desmolda fácilmente
WUAUUU !! CRACK !!!
Mis pensamientos: ¡ OJALÁ MI MARIDITO LINDO DEDICASE UNOS RATITOS PARA HACER ALGO ASÍ ! (Y digo mi chico porque yo trabajo de sol a luna y NO TENGO TANTO TIEMPO COMO ÉL!!!!)...
Saludos desde Barcelona, España
Super bonitas!!!!! Y puedes pintar la base de cualquier color!!!!!
Hermoso me Encanta gracias por el video saludos desde Mi Hermosa 🇻🇪❤️❤️🌹🌹❤️❤️
Que bonitas te wuedaron amigo te felicito
Muy lindo provecho.Pronto lo intentaré.
me encantó!!! saludos de ezeizaARGENTINA
I always watch the English channel, it's quite entertaining and useful. Good luck with this one too! It's a bit strange to get measures in inches in Spanish though, so you might want to switch even if conversion is approximate only, or at least to mention both imperial and metric values (like "vamos a medir 5 pulgadas o 12.7 centímetros"). Regards.
i dont think he should worry about conversions, most tools have both values and im a weekend woodworker (just for hobby), and i end up learning measures in inches, it's just easy to know both, in fact, i guess is better to not tell people both in videos, so they get interest in learning, it's very important and very practical.
es un super trabajo con gran creatividad.
Hola ...muy buena idea..The fer tiene razon se corta en dos mitades el tubo de PCV y se le asegura con 2 amarras plasticas y ya
Me da mucha risa la voz! 😂
Pero tienes proyectos muy buenos.
x2 pero hace buenos videos !
A mi me esteza
que buenos proyectos. Ya hasta eres mi maestro.
Eres un artista.
Gracias Genio, eso estaba buscando 😁😘👍🇦🇷
Muy bonitas y sencillas de hacer... 👍
Gracias mi memin pingüin constructor!
jAJAJAJ
Gracias por compartir 🙏🏾❣
Muy bien excelente que lindas ideas
Me gustan para el patio
muchísimas gracias!! Sigue aportando tus proyectos guapos
Excelente muy bien
Que bonito
Maravilloso🤩🤩👌👌
Quedaron hermosas!
Muito tekinico gostei ok sábio.
Super lindas. Gracias por mostrarnos tu excelente trabajo 👍😎☉
buenísimos....gracias por compartir, saludos
Que buen vídeo ,gracias
Eres muy creativo!!! Excelente trabajo!
Una consulta el transformador de cuantos amperios es ?
Good work man
Que bien amigo también te sigo en tu canal en inglés saludos 👍
Hola buenas... Se puede hacer con resina de pisos?
Entre a buscar muy emocionada y decidida como hacer una lámpara botella de vidrio y me encontre con este tutorial y me encantó esta precioso!¡!¡!...Pero de todo esto lo único que tengo son mi botella y las ganas de hacer mi lampara 😭😭😢
BEEEEEEELLAS
Me encanto tu proyecto...el problema es que no tengo las herramientas! 😊
Usa lo que tengas a mano, es mas fácil de lo que parece
Hola, felicidades por este nuevo canal, hacia falta.
Aunque no entiendo el ingles siempre e obtenido muy buenas ideas del canal en ingles, gracias de nuevo.
Gracias, espero que ayude a los viwers a comprender mejor las vídees en mi canal principal.
oh well done, they look awesome and elegant! How much did they cost in the end, roughly?
Suscripción y me gusta!!!!
Gracias
Tipo de cemento usado??
I like your channels man, hice job
Todo bien pero para evitar romper el molde de PVC, usar desmoldante para concreto... o en todo caso usar aceite de cocina y embadurnar el tubo donde tendrá contacto con el concreto y listo... Solo retiran el tubo cuando esté armado el concreto empujando de un lado.
Did you check for electricity?
You might want to hold off on this channel - You tube will be introducing audio choice on videos soon... . if the uploder has a second, third etc audio for the same video...
Yes, i heard the same thing, but i've been hearing that for years and still no choice around... i guess it's better to hold the channel 'til it actually happens.
Thanks for this! I'm a suscriber for the DIY in English, but this is so cool! Keep doing it! :)
Thank you :)
Passa óleo no cano,fica mais fácil a retirada.
Hola amigo soy de Colombia no sé cómo llaman la sienta de tiempo acá en Colombia y además no sé dónde conseguirlo me ayudarías gracias por tu respuesta
Demaciado trabajo ,si no tienes Tadas las herramientas te jodes sale más barato comprarlo
Todo mundo tiene esas herramientas a la mano , seee...
Ponele aceite al pvc y no será difícil sacarlo
En lugar de concreto usar maderas
y las luces no calientan el vidrio ????
buen dia, las luces Led no calientan ...
Oye we.ese martillo no es de un bus ??
Por que la voz se escucha tan rara
It's a very cool idea this channel, because there is almost no content in this language; but being a native spanish speaker, the voice sounds a little weird.
Sometimes I couldn't understand what is being said. Is this a computer generated voice?
I think a real human voice would a thousand times better.
Thanks man, Yes its a computer-generated voice. I am working with a company that converts my videos. They are in the beginning stage and they feel this will get better over time. I have been wanting to do this for a long time, just unable to have a person get involved. I agree sure a person would be a big improvement.
DIY Creators Latino Sometimes it sounds really natural, like a real human voice, it has a lot of potential.
I wish I could help, but I don't have the necessary tools or a good attractive voice.
I have a couple Hispanic friends but neither have interest in helping. Thank's though :), if this doesn't work out I will dig deeper to find someone to help me keep it going.
DIY Creators Latino I guess I could borrow a mic from a friend, and send you a clip so we can see what you think.
Is that ok with you?
DIY Creators Latino
Hi! I agree the coment below. I hope you find a person who make the off voice. It’s doesn ‘t sound fine or nice. My voice is not very nice, so I’m sure I cannot help with that. 🤐
I’m a suscriber from the original channel, it’s very easy to understand, but this will help you to reach more viewer.
Greating from Uruguay 🇺🇾
papi, pero vocalice!
Que haces con el PVC que desechaste....? Te lo comiste. .?..como idea buena. Pero ...de cuidar el medio ambiente...nada,
Habla cristianó, hay un monton de veces que no te entiende
que horribles lamparas
Te soy sincero, no sé si son tus vídeos o sólo utilizas otros para hacer la voz ... No puedo darte like por esa duda ... Pero el vídeo muy bueno