Driving my TEMU SUPERCHARGED KEI CAR for the First Time!
HTML-код
- Опубликовано: 30 сен 2024
- It's finally time to test drive the Temu Supercharged kei car for the first time!
MERCH ► sammit.net
FIND ME EVERYWHERE HERE ► linktr.ee/samm...
BECOME A MEMBER ► www.youtube.co...
Why I drink Gamer Supps ► • Why Gamer Supps?
#Subscribe
#SAMMIT
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Sounds like a full scale RC car. lol
It really does 😅
Nitro rc be like
It's so goofy, very unique to say the least
Bigger pulley = Less Boost. I'm guessing you didn't read the comments on the last video 😅
He said he read the comments and mentions about the pulley at 11:35… but whether he followed any of the advice it is a different question 😅
@@Fabulousprofound168 100% didn't follow like usual
@@Twenty_Six_Hundred He probably films this days before it's posted
I'm guessing you didn't pay attention to this video
Car doesn’t run well bc it has to much boost
Larger pulley and front mount = success. Too bad these videos are posted after you make your choices.
Golly that thing is so damn loud lol
It's being overspun imo. The superchargers already in too high a boost at low RPM's
Supercharger wasn't meant for engine like this. It was probably for a generator engine or something similar that runs at a constant lower rpm.
@@Berm_Blaster There's a guy who has a 730cc Kubota Diesel swapped Honda Insight with this same AMR500 and he's running 10PSI. Doesn't sound nearly like this
@@Berm_Blaster This type of supercharger was literally used on kei cars, it's just most of the ones available online have been "refurbished" in china, pretty sure they were used on some subarus among other cars.
@@MrBluePoochyenait really is lol
When you have to yell “ sounds alright “ to hear yourself over the engine it probably isn’t, lol !😂
ROFL Props!
Haha, The look on the pedestrians faces were gold
Replace the plastic screws with some better ones, plastic ones are so dumb.
Never understood why plastic to begin with.
That thing sounds like when you slam your shoes on the back tire of a bike to stop 😂
On the topic of the gear shifter - if you were to add an extra inch between the pivot point and the lower rod connection. You'll end up with a short throw gear stick.
Adding a throttle body before the supercharger will massively quieten things down.
Cool build up.
Have someone remake the supercharger impellers out of metal and replace them and see what these little chargers are actually capable of
That's funny... I commented the same thing on the last video. I'm sure he has a hook-up at a machine shop somewhere. Metal impellers would probably make it sound less awkward to. I think we're the only 2 to say it so far
@@travisstamp7428 well let's just hope he sees these lol
Was thinking the same thing. Should be pretty easy to make
When he spit on the bolt I almost died
Lol i knew right away where he was going with that. Lol
Had to give that hawk ptuah
He spit on that Thang
I know this is supposed to be a fun cheap no-brain build, but you should definitely overengineer this thing!! Get a real supercharger, front mount, and everything to make this thing run and ride like a dream ❤❤
just put a delta black fan on that intercooler ;) the king of all PC fans ;)
Ages ago I did the math for how many maxed out delta fans in a bank would make 1psi of boost, from memory it was somewhere around 8-10
@@DJKr15py i was thinking on cooling the intercooler ;)
That welder sounds like dubstep
If you wanna run something like this on a stock ecu you have to frankenstein your map sensor find one from a factory turbo car that has the same first 5-6 digits of your part number and plug matches then get 150-200cc bigger injectors this may require you to make new spacers
Forgot the fuel pressure regulator either buy aftermarket or you can do the same as with the map sensor but it could be more involved adapting to suit your fuel system so aftermarket is best
Tomorrows video intro with may “HOK 2OOohAH” 😂😂😂🤣
My sides readied themselves for orbit when he hawk thuh on that thang 😂
common problem with those Superchargers is the oil in them. u need to put some different hq oil in it for it to work proper and sound proper
Sammit diecast car sounds sick but blow up that one then Yamaha R6 swap,Turbo,aero ,wheels/suspension and have way more fun grip/drift kart 👍
Sammit you been spinning that knob for a long time and it doesnt feel tight hmm 😂 you might have a problem
Sounds dope!! Engine management and larger pulley should do the trick. Either way, it's super fun to mess around with 😛
Sounds like a cat is being tortured lol
Why you take down your last vid was about to watch and it’s gone tittle was mentioned you?
needs more fuel, running too lean on boost. install a wideband and install an additional injector in the inlet manafold
Even if it works it’s too loud. Sounds like it’s about to blow any minute.
Dammit sammit didn’t read the comment to change to bigger pulley 😅😅😅
This was filmed a day before the last video went out 😭
Still needs a bigger diameter pulley, there's too much boost to control right now.
As a parent, i felt that reference very deeply. 😅
I think the next steps are uprated fuel injectors, a 2 bar manifold pressure sensor, a wide band oxygen sensor and as you've mentioned an ECU remap, if it doesn't die first haha,
Maybe the stock fuel injectors from a turbo kei car will be good if you find some that fit
Its a knokoff rx-7
Get a genuine Mini Supercharger system for it
I wouldn't drive through any puddles or rain with the filter right on the bottom like that
Oh boy you need to go a step down colder in spark plugs and you need to gap them down quite a bit....
Buddy
upgrade the Fuel system IMO
Need to twin charge the #bogan😂😂😂😂😂
Bigger pulley = less boost = less motor go boom
1 dollar motor = more fun replacing engines
I'd definitely double check the max RPM for the supercharger, I've also seen people put a second throttle body before the supercharger to reduce noise.
Replace the blower with one you haven't touched and see how much better things are . Top vid btw 👌 ❤❤
Awesome video as always Sammit. Can’t wait to see the KT-R racing.
My supercharger has a bpv, but it's internal. The valve is open at no-partial throttle...thus bypassing the supercharger rotors. When you give more throttle the more the valve closes forcing air into the supercharger, bringing boost up for the appropriate throttle. Full throttle gives full boost until redline, 75% throttle will give full boost until it hits 5kish runs and slowly opens the bpv bleeding off boost.
How about using a REAL supercharger from a REAL company?
I'm not sure where to buy it but the Eaton TVS R340 is for engines up to 2.0l, you could just add a larger pulley to lower the boost down....Eaton also says it works with compound boosting...So perhaps the supercharger AND a turbo, along with larger injectors and a programmable ECU...
Might be fun to tear into one of those and upgrade rods and stuff then up the boost...
Delete the intercooler you don’t need it, put a pipe with only a blow off valve 👌👌👌🤙
Oil In the supercharger?
Tomorrows frontpage: "RUclipsr Sammit nearly kills his wife with falling carparts."
ruclips.net/video/5mOI9sPk1b8/видео.html
Nice hydrolock intake
In the spirit of budget.
Would a turbo model ecu swap work? Obviously with all matching accessories.
Injectors,sensors, fuel pump.ect
As far as racing it. Could it race in those k car races where you flipped the car?
if you say aluminium, it will weld nicely 😅
you can bbuy an AMR300 OR AMR500 off YAJ for cheap, and its better than the AMR repro youll have an official from Aisin
I have to wonder what the afr is on that now, over boosted and no additional fuel sounds like he’ll need a new engine soon. Water spray on the intercooler would help. Maybe even one of those APE kits so he can flex fuel it and run some E in it instead of a link, just a piggy back unit. The link is going to cost more than the van and the motor. A little welding for a cold air intake with a filter that isn’t 6 inches of the ground. It will make a nice little daily but loud, next he’ll be straight piping it. How’s it ever going to pass inspection that loud?
bigger fuel pump? boost reference fuel pressure regulator? fuel injectors twice the size as the injectors on the engine? set regulator at half the pressure the OEM system was set to... tho that methanol injector in front of the blower idea, would be a big fire thing if the blow off valve was piped into the exhaust... confusing translations?
keep the kei-car stuff coming... I would love if you venture to Toyota Passo QNC10 /Daihatsu Boon M300
OMG I got the reference lolz my 9 month old loves watching Ms. Amy lolz It definitely is stuck in my head also 🤣
It's definitely time to get on the abandoned S-15 heck do an engine build or teardown for that car so you have some kind of content on it that will lighten the work load when it is ready to become a non abandoned car again because it although inside somewhere else from the original outdoor salvage spot it's definitely still high on the abandoned listing you were adamant about saving it from. You are letting this great content fall to the wayside Sam!!!... fix this issue.
Could Use a clutch pulley off a Toyota supercharger with a hobbs switch or install map sensor before supercharger as its seeing boost at idle and having a stroke.. just a thought. You do need to turn up the duty cycle and frequently on the tig welder tho just test on scrap 1st .
That aluminium is probably anodised you will need to grind the surface back a bit. And as everyone says you need to learn basics of how superchargers work 😂
22:20 you must be fasten seatbelt!
if you didin't and found by police, you will have to pay a fine and will also receive points on your license. If you accumulate enough points, your license will be suspended or even revoked, and if you are suspended, you will also be required to take a course. If it is cancelled, you will have to get it again.
mega loud, i question if there is a muffler at all! tho yes a smaller pulley is definitely going to lower the boost! also reason stuff gets hot, same as a AC, compressed gas gets hotter and decompressed gas gets colder. (so if you compress the gas, cool it then decompress it, you got an AC! but in the engine you got more power due to denser air.)
This "build" is super lame. Probably the lamest Sam has done. Did the raffle winner finally receive his prize?
hmm do these things come in AWD, certainly looks like its all setup for a driveshaft/diff - the fuel tank is even off to the side.... I see this possibly escalating quick :)
im sure it pcm (powertrain computer mode) for engine aint setup curranty because there is 2 sensor on exhaust and 2 sensor on intake if you bypass intake sensor them yah it going shut itself off because it aint able to read air flow to adjust fuel and air rate so you ended up going back installed intake sensor to fix few issues so dont need to reprogram it (i have done it on few engine inline 4 by putting maf in front of supercharger so pcm can read it) some of my customer bypassed it bought it to me i tell them bring back parts you took off of it they bought it back and i have to installed it set up so not bypassed any sensor and now it run like race car lol
Sam: let’s not blow it up
Also Sam: proceeds to rev the beans out of it
I think you got too much intake for the supercharger, unlimited flow vs the restriction going to the engine. If you put the plate on the bottom it shouldn’t overheat!
the bypass will be tough for the ecu to balance, you need a larger pulley to slow down the SC to a more usable rpm
That intake is going to sip some insane water if it rains
It’s called water injection!!! 👌🏼👌🏼👌🏼😭🤣😭
@@SAMMITcheap boy water meth injection
Another project that's just going to sit like the raffle car that took months for the winner to receive. Looks like Sam is at a low point content wise.
Maybe you can use a clutch pulley similar to ac compressor to disengage the supercharger..?!?
Bros breaking hands 🙌 playing solo slap chop 🎉 explosive results bro ggyat by his own back fire 🔥 hahaha
Is anything from temu ever a good odea? There are plenty of motorcycle engines that could go in there and still keep that thing at kei car spec
You need a bigger pulley, and put the throttle body in front of the supercharger! Pay attention to your comments! lol
8:10 your face made me pmsl 🤣 love your enthusiasm Sam 🤙
You should get other people like mai or daiki into one of these cars and do stuff together like make a kei car racing series or a demo derby or car soccer or drag racing
Easy when you have a shop with a lift and tools and I bet drive way boi’n that would have been terribly fun 🎉😅😢😢😢😢😢
I think the copacity of the engine is to small for a supercharger maybe turbo would be a better choice.
Right after you messed up the shifter you said it was goin good :) typical LOL.
these chargers are designed for small low l3revving engines so u need a big pulley on the charger to drop the rpm on it as its spooling too fast hence why they get too hot and chew them selves am sure there used on things like small didesl engines and lawnmower style engines so deffo a massive pulley will help drop the rpm and boost
What site do you source these from? I wouldn’t mind a couple. Thanks.
9.13 he even says to much boost put a larger pulley on it watch the video fully 😂
I think it would be fun if you use the van for a friends/RUclipsr loaner car when they are in Japan
Shouldn't the throttle body be infront of the supercharger Inlet like all other s/c cars?
Sounds like the karts from Mario Kart 64 when they turbo boost/drift.
Just for fun you should throw an eBay FPR on it and see if it gets slightly happier.
The second welding section sounds like the rx7 from baby got brap
That actually sounds like a Trabant,
a two stroke car from the 60s🤣
That charger is going to shit the bed, look into the sc14 sam, like 400aud on ali.
New shirt coming soon...I DONT CARE with the suzuki on it 😂
I dont waste my time remembering the spit part either, its about the ending!
Your actually dumb for a car guy , how do you not know a bigger pully = less boost 😂
Like I said bigger pulley, a stock turbo ecu, and water to air cooler on meth
For the love of god....get a bigger pulley and have some impellers made from metal!
sammit casually hittin that hawk tuah
mabye becuase the inner of the supercharger is plastic, its to light, so it makes more boost?
Hope you build it right next time. K6A-T and Wagon R RR full body kit
Thanks for putting miss rachel in my head too! 😂
It's sounds funny every time hearing an Aussie say aloom-in-umm.
Try a Phantom Grip / Style LSD. for testing purposes
That whole super rubbish is going to melt , too pissy ,plastic blades ?
The amount of embarassment it is to drive a kei car and have it louder than a super car
It's sounds weird hearing an Aussie pronouncing it 'aluminum'.
I would consider getting the blades of the charger coated with graphite?