This EDC is going to be hard to beat! | MT2A Pro
HTML-код
- Опубликовано: 1 июн 2024
- Use code YOU10 at checkout for 10% off your order!
WHERE TO BUY
*************************
rb.gy/ep0u41
FOLLOW US
*************************
Facebook: / nitecorestore
Instagram: / nitecorestore
TikTok: / nitecore_store
CHAPTERS
*************************
0:00 - Intro
0:50 - What is Included?
1:11 - Overview
4:17 - Personal Thoughts
7:29 - Pro vs Original
9:00 - Operation Guide
9:55 - The Specs!
10:53 - Outro
FEATURES
*************************
-Max brightness of 1000 lumens with a 279 yard throw
-Can use the Nitecore NL1416R battery or 2 x AA
-Two-way clip to attach it to backpacks, belts, etc.
-IP68 waterproof rating and 1 meter drop resistant
*************************
♪ (no copyright music) lofi type beat 'frosty lights' free vlog music
Link: • (no copyright music) l...
#nitecore #edc #tactical #MT2Apro #new #flashlight #flashaholic #tech #technology 
Наука
Be careful about recommending the battery that comes with the light as a replacement for two AA batteries. The voltage of two AA batteries in series is 3.0V, this battery is 3.7V and can potentially damage sensitive electronics.
Yes! Very fair point, definitely should have used more concise language, was more speaking on how it could hypothetically work with other AA lights, but the battery is custom-built for the MT2A Pro. Could definitely damage other electronics, so that is a definite mistake on my part, thanks for your comment!
Im ordering about 4 of them and im going to stash them all over the place. They are small enough to fit pretty much anywhere (car, drawer, backpack, kitchen, bathroom, garage, etc.) And they can take the very common AA battery which is awesome. It wont replace my SRT7i but it is going to be great to have an extra light around the house and one on my plate carrier. Love it.
I’ve bought 2 and i enjoy them! One in my car glove box and one as my night walk go to. Would love more to have on my bed stand and backpack. Nitecore feel free to send me stuff, I’ll use it!
Winner winner chicken dinner👍 Looking forward to when these are in stock!
I use my index finger sometimes, now that my thumb does not curl anymore. This light will look good & be small & light in my shirt pocket, next to a thin line folding knife.
I’ve had this light for about 2 weeks now. I really like this light.
A reliable instant access to turbo would have been better for me. I understand that it has mode memory but you can forget to set it and that’s not something I want since I want this as a self defense carry
Can you elaborate? I carry a M2R Warrior for the exact reason of instant access to full brightness and stobe (light press and hold press)
I just received mine today from Nitecore Store and I am loving it. The mailed one to me last week and it was stolen or fell out as I received only empty envelope. The replacement arrived very quickly. The UHi 20 led is tiny so this has good throw for being such a small light. I tried on 2 AA alkaline batteries it has really decent throw and brightness. I haven’t tried on lithium primary or nimh. I am so tempted to order several more as gifts.
Thank you Nitecore Store!!
Our pleasure! So happy to hear that was taken care of and that you're happy with your new light!
Awesome improvements over my MT2A
Great to hear!
Man can’t wait to get my hands on 1‼️
Regarding the charging cable, it's a USB-C connector at the battery end, but what about at the charging end? I assume it's a standard USB-A which plugs in to most chargers for cell phones and tablets. Since you don't show the charging end of the cable, nor what it's plugged into, I don't know for sure.
Three cheers for usb-c!
Why Nitecore doesn't make a flashlight with 14500 battery, a short MT2A Pro?
Is this also an update for the mt21a?
Or maybe a pro version of that would be cool too
I recall the MT21A had a great throw. This MT2A Pro is definitely an upgrade if you like the throw.
Can you use this new battery to the previous MT2A model?
From our testing yes it did work with new battery however as the original was only built to handle low nominal voltage AA batteries you might want to proceed with caution!
Its great but I am waiting for a MT 1 a pro with 14500 battery
This seems like a direct competitor to the Fenix LD22 V2 with better efficiency in both the emitter and the included battery capacity (both emulate 2 AA end to end, but Nitcore's packs an extra 500 mAh- could you use the Nitecore battery in the Fenix? 3.7 volts vs 3.6 volts). That being said, I'd still prefer the Fenix due to more lighting modes (and an all-important ultra-low at 2 lumens), momentary capable forward clicky rear switch, and I prefer the simple on/off from the rear switch with another switch for mode selection.
Can this flashlight take 2x14500 batteries as a backup instead of 2xAA?
Sadly no!
When will this be available?
We are expecting our shipment from Nitecore corporate to come in 11/10!
@@NitecoreStore thank you
I would love to see that with the front selector button.
do you know when it is going to be released in EU ?
Nice review
Next time give it a 1 or half lumen mode too. A light this small deserves a lower lumen mode than the 50 and 60 option. It would be the do all. My coast and lux pro just have high and low. You guys added the turbo and the lithium battery so at least it’s got that going for it. P23i is still my go to.
Reverse clicky switch 👎🏼
Yup 😅
Reverse clicky within a memory function
Yeah I'd have preferred if it wasn't a reverse clicky also.
What is meant by “reverse clicky” 🤨 legit inquiry
@@yourpalcraig Forward clicky is when you push the switch and halfway through the press the light turns on and THEN it clicks. This allows for momentary on functionality. Reverse clicky is when the click happens before the light powers on. Reverse clicky allows for easier mode switching in single-button lights.
EDIT to elaborate further after a little Googling:
Reverse clicky - You have to fully press, then fully release the tail switch button, to get it to turn on, or off
You have to commit to the output you want, before you turn the light on completely. It'll come on and stay on, with a full click of the switch (even though you haven't yet released the switch).
Forward clicky - It comes on momentarily, or cycles through different outputs (momentarily) even when you've only pressed the switch slightly), while the light is off.
With reverse clicky, you generally have to already have the light on, before you can cycle through different outputs - but you can change your mind, after the light is already on, and re-adjust the output without turning the light off, then on again.
Does it have mode memory?
Yes it does! 9:30
My apologies, missed it.@@NitecoreStore
Looks great but I’m not impressed with the UI and lack of lighting modes.
The only issue is that you always have to remove the battery to recharge it.. if only you can charge it outside the unit and it has a circuitry to avoid charging AA batteries
It's a tradeoff. A built-in charging circuit in the light is more convenient. But besides the compatibility issue you mentioned, it also results in increased bulk, more prone to electronics failure, reduced waterproofing, and higher costs. For jobs demanding uninterrupted use of the light, charging a backup battery externally, without relying on the light itself, can actually be a better option.
Does it get too hot to hold on turbo?
No, it honestly stays surprisingly cool whenever using it on its turbo setting, definitely gets warm but never uncomfortable!
Better than my two year old used daily at work MT2A?
That is up to you! We compare them here (7:29) in the video to try and inform your purchase decision!
I consider the new MT2A Pro better for three reasons: 1) easier to use; 2)sleek looking; 3) brighter if needed
I tried ordering from nitecore and the visa wasn’t working there😤wasted money on a visa for nothing
Thats money burn???
@@muhdizai I’ll kiss you 😘
….but it is only 500 lumens with AA batteries.
Only? 500 lumen with AA is quite good!
Might be biased here, but yeah, I agree, 500lm of output is pretty good for a dual AA powered flashlight, especially whenever you factor in the runtime, price, and size of it, I have not done a crazy amount of research but it's pretty much top of the line for AA powered lights
No strobe? No strike bezel?
The reverse clicky switch is the perennial reminder that you are holding a cheap piece of gear in your hand.
Before the Made in China lights of 2002, all flashlight had a forward clickie switch. A forward switch is build using two springs in opposition, and the forward spring has to have half of the push-force of the reverse spring; the two springs must be calibrated. When China begun manufacturing lights, they removed the forward spring, and the reverse spring had no longer any need to be force-calibrated. They could manufacture a tail switch for ten times less money.
Flashaholics hate reverse clickie switches more than pee-green light beams.
I see the use of a reverse clickie as an indicator that this MT2AA Pro flashlight is meant for common people, not flashaholics. It can be imperfect, and non-flashaholics will not notice...
Lol y'all gotta stop copying @NitecoreSG so blatantly, no hate but it just shows the lack in effort to make your production levels something original of your own ha.
We draw inspiration from those we like and make it our own, that's what every content creator does