Pinarello is far 30km from my home. I got an old one, a Prince of ‘99…I got no moneys to buy this artwork, but when I watch these videos I dreams to have it…and dream is the only thing that I can do so 🙏🙏🙏thank you so much!!!!!!
@@Marco-717 LMAO guy you can't even talk, you've got garbage ass coil forks on your MTB and old ass brifters on the other bike, come back and talk when your bikes are worth more than 1k combined
30+ years ago the handlebar tape came with very aesthetic coloured tape. I used to use electrical tape and apply the provided strips over and then use 6mm wide selotape on the sides. Also the bar ends had screw in ends, today you just bung in the tacky plastic bit
@@theRealDavidn If it makes you feel better, my wife hasn't seen the CC bill and doesn't know what the bike cost. I think she'll be sick too, and I'll need a good dentist. 🤣
i have 2 pinarello one old Dogma Think 2 di2 , and one Dogma F10 again Di2 , I am very most satisfied , every read is a really joy this bike very easy , next : Personally, I find the F10 easier than the Think2, even though it is designed to be hard to drive, comfortable, nervous, responsive, the F10 gives me a lot of satisfaction, so I dare to imagine the happiness of being on an F12 or the Pinarello F I dream of it
damn it's a damn good looking bike and awesome to see the new 9200 dura ace! tho that bar tape job could be better it's all rushed and you can clearly see the kinks in some shots otherwise very nice
Please make the rim brake video. Other than that, beautiful. I have to say that my f12 is very twitchy on the front end and rear on a downhill (35-40 mph) My set up is dura ace di2 enve 5.6 and and no spacers on the head tube. Rim brake of course (my dogma f will be rim brake as well). So I also have a pinarello 2011 and no twitching. This makes me to believe that the newer dogmas there is an engineering design issue at the head tube.
I was waiting for the doves to be set free. But on a serious note, I had to turn it off about halfway through because there were just too many unnecessary camera movements.
Hi to do a full build mtb hard tail with remote suspension 12 speed a cycle tech mechanic said it would take 4 to 5 hours is this correct it looks like Gee would do a beautiful build in an hour
Definitely wouldn't take 4-5 hours for a hard tail. 2 hours is reasonable maybe 3 at the very most. A bike like this in the video with internal brake routing, Di2 routing and updating, bar tape etc would take a little longer
The DREAM BUILD webstore is now LIVE and you can now purchase clothing featuring bespoke Dream Build designs!
dreambuildstore.com
Hi gee milner
Hi gee milner
can you give me that car i'm a big fan of you in vietnam if you come i can take you to explore Kien Giang
Hope you reply.:3
Hi gee Milner can you please call me
How many price this bike
Pinarello is far 30km from my home. I got an old one, a Prince of ‘99…I got no moneys to buy this artwork, but when I watch these videos I dreams to have it…and dream is the only thing that I can do so 🙏🙏🙏thank you so much!!!!!!
Yeah agreed, I prefer the old workshop. This space gives me the vibes that I need to find repentance first, before I am allowed to collect the bike.
Corny asian jokes..
@@Marco-717 typical sad lonely dude...
@@aaronli4171 not as sad as your virginity
@@Marco-717 nice one dude, you're doing great
@@Marco-717 LMAO guy you can't even talk, you've got garbage ass coil forks on your MTB and old ass brifters on the other bike, come back and talk when your bikes are worth more than 1k combined
Reminds me of a comment I saw a while back -
“no matter how much your bike costs, the bar tape still ends with black electric tape”
you still can go with a 3M one or the $1 store brand shreds like toilet paper (had to do it once, it was the only one available)
unless you're an ineos rider rocking glue instead of electric tape
You can actually start from the middle and avoid electric tape
30+ years ago the handlebar tape came with very aesthetic coloured tape. I used to use electrical tape and apply the provided strips over and then use 6mm wide selotape on the sides. Also the bar ends had screw in ends, today you just bung in the tacky plastic bit
I kinda like the old school grime and roughness of the old workshop
Agree.. please back to the workshop for the built... the neon studio maybe for the photos
Imagine how happy you are having this beauty on Christmas Eve ❤️❤️❤️
Absolutely beautiful. What a bike - love the colourway on this one in particular 👌
I feel like a dogma f is everyone’s dream build right a
It’s sheer poetry… the bike might not make anyone any faster but it sure would make anyone want to spend their whole life on it getting faster
Such a beautiful bike, very organic and curvy lines. Dream build of a dream bike!
simplicity of bike assembly coupled with the well-being of the assembly sensation
Perfect lighting on the build.
Magnifique, bravo aux techniciens. Super boulot
An amazing bike. A dream.build in a futuristic setting
a very exquisite scenery and a very satisfying one too. I love it
i will wait for the rim brake version
I really love this build.. very satisfying 😊
WHAT A BEAUTIFUL BIKE SO FAR
A Dogma with Dura ACE…..Naughty naughty 🥴🥴🥴 love it!
Pinarello é super incrível.
Roba x solo ricchi benestanti caro Pinarello.
Dream bike in perfect colour 😍 This video was so calming, thank you!
Loving that you cut the electrical tape and not tear it off like some savages you see on these videos.
Dream bike. Absolutely.
es que simplemente ya están en otro nivel con esa bicicleta !!!! les quedo muy bien ese video.
Yes. Today is real dream bike build :D
Been riding mine a few weeks now, and I love it.
You make me sick
🤣🤣🤣
@@theRealDavidn If it makes you feel better, my wife hasn't seen the CC bill and doesn't know what the bike cost. I think she'll be sick too, and I'll need a good dentist. 🤣
@@LouieBaLLz hahaaa you might also need a urologist and an orthopaedic surgeon after she see the bill!!!
Never actually seen a bike being built. Really interesting to watch. I wonder how long that took in real time
Aww... I am drooling...
looks so light!
ASMR dla kolarzy, kciuk w górę. i nie tylko
i have 2 pinarello one old Dogma Think 2 di2 , and one Dogma F10 again Di2 , I am very most satisfied , every read is a really joy this bike very easy , next : Personally, I find the F10 easier than the Think2, even though it is designed to be hard to drive, comfortable, nervous, responsive, the F10 gives me a lot of satisfaction, so I dare to imagine the happiness of being on an F12 or the Pinarello F I dream of it
Definitely dreeeeeeaaaaaaaaammmmiiiinnngg! ❤
Keren sepedanya,👍
saya suka, pengerja'an yang sangat rapih...salam dari indonesia😊👍👍
와씨;;;;;; 도그마F 미쳤다. 영롱함의 끝판왕이네
Très beau vélo…👍 et un très bon mécano 👍
I'm really like a road bike...
But I'm not enough money to buy
I'm hope some day i'll have this one
Tks the Dream build give dream to me...
おー!ついにこれ系の動画も出てきましたか〜
Alucinante!! Bicicletón!! 🤩🤩🤩
Love watching Dream build, I only wish there was a place in the U.S.A. the paints Carbon Bikes.
Wow its so beautiful i wish i have one like that. From the Philippines😍
Soon i'll ride this bike
Great build!
Awosome video and bike!!
The dental practice must be doing well this year
beautiful bike and awesome build
Dream Milner✌🏼✌🏼⚙️⚙️😍😍
Belleza!
beautiful
Thank you! Cheers!
PINARELLO is ❤️
Wow superb
perfect 👌love Dogma F 😍😍😍
Love from Trinidad🇹🇹
Well done lovely 😍
Thanks for watching glad you enjoyed it!
Beautiful 😍
BELLO !
Love from India 🇮🇳❤️
Tubeless 😍😍😍
Algo ,hermoso ,que máquina , que será el futuro ?
Vidéo 📹 exceptionnel !!!
Love 💕 this build great 👍 job and immaculate work Gee
its really lit 🔥
My Dream bike CIPOLLINI NK1K ❤, Dogma
Nice bike 😊👍🏻👍🏻
Hoping I could get one someday
Senenganku Dogma F 🤩
Безгранична, инженерная мысль!!!!
Show em muito bom mesmo ainda compro uma dessa
Dream job Dream bike 🙏❤🇵🇭
Me gusto el video
damn it's a damn good looking bike and awesome to see the new 9200 dura ace!
tho that bar tape job could be better it's all rushed and you can clearly see the kinks in some shots otherwise very nice
Nice bro
Please make the rim brake video. Other than that, beautiful. I have to say that my f12 is very twitchy on the front end and rear on a downhill (35-40 mph) My set up is dura ace di2 enve 5.6 and and no spacers on the head tube. Rim brake of course (my dogma f will be rim brake as well). So I also have a pinarello 2011 and no twitching. This makes me to believe that the newer dogmas there is an engineering design issue at the head tube.
10:43 The disc rotor seems to have been used before, right?
crank is also scratched - shimano supply is so shitty right now that they are most likely reusing a groupset to shoot this
Dream bike. Ugh
Un buen Ensamblaje.
instead of cable lines for the front and rear brakes are on the left side of the headset. not right and left?
Hello. May I know where you mounted the Di2 battery? Thanks.
Wonderful cycle
Glad you enjoyed it!
Yes
I want to make cycle like this
Can you please tell me
@@GeeMilner can you please tell me how you make this cycle
It's a great video! I'm curious about the camera model used for shooting.
It would be better with campagnolo groupset and wheels. Full Italian build.🤩
Beautiful, but why not Campagnolo? So much more fitting for this bike.
Greetings from Hong Kong! Sexy bike!
Hi and thanks for watching!
I was waiting for the doves to be set free. But on a serious note, I had to turn it off about halfway through because there were just too many unnecessary camera movements.
oh no, the horror. psh.
Lo fate a posta stupendamente d argento❤pinarello un fratello o sorella questa bici 🚲 bella mi fa commuovere sembra strano ma nn lo è.
This is such a beautiful video! What model of shooting camera do you use?
Love from peru
😍😍😍
Đẹp quá!
IL TOP DEL MADE IN ITALY !!!!
Final weight with pedals and bottle cages?
참 이쁘네
Will this bike be sold in "borealis" aswell
Am I in heaven?
와 지리게 멋있네
Hi to do a full build mtb hard tail with remote suspension 12 speed a cycle tech mechanic said it would take 4 to 5 hours is this correct it looks like Gee would do a beautiful build in an hour
Definitely wouldn't take 4-5 hours for a hard tail. 2 hours is reasonable maybe 3 at the very most. A bike like this in the video with internal brake routing, Di2 routing and updating, bar tape etc would take a little longer
Italy❤
No rim brake, no Campa...😭😭😭
👍👍👍
Does anyone have a build for pinarello X? where is the DI 2 battery on pinarello X?
Why some wheel we can pump the nitrogen inside it ? Can anyone explain
Its like watching the birth of a child