i am Professional Graphic designer...and i know much about pre press but i did not know what is Gravure printing unless a client came to me for designing to do a gravure printing....obviously there are much techinal differences even in desiging for Offset printing and Gravure printing...and all i want to say that this was the best video i have ever seen .... excellent and informative....Thumbs up (Y)
hello, i'm a russian student, pls help me to understand 1 thing in this field. What does the "band" and "no band" mean? How it binding with cylinder type?
Don't know how I got here, but once again the algorithm blows my mind, because I am TOTALLY interested in learning obscure technical/industrial processes. The algorithm just seems to KNOW exactly which totally random videos that I will like, and sometimes it's right on, and it feeds them to me one after another.. and other times, it seems like it thinks I'm someone else, because it will show me one garbage video after another and I can skip 50 videos in a row without being slightly interested in a single one of them. Go figure.
FYI this is not obscure, this is a world-wide renowned printing technique, used on hella packages. Perhaps more popular in Europe though, if you weren't aware of it. ~Student who's a media technologist
Hi, How is the excess ink removed from the cylinder face please ? I understand a "blade" can be used, but I can't see how this leaves a totally clean surface at thousands or revolutions per minute ? Thanks, Steve
chamber with 2 blades (negative and positive) is used for higher rpm, the colour circulates inside the chamber under pressure. Also a tiny layer of colour stays on the cylinder and cools down the blade (it dries befoe it reaches the printed material). Hard to understand, but it works.
I am on the run from the small-litho printing trade using conventional Moleton damping. It was an uncontrolable "bitty" nightmare for 14 years ! I just love the "new" modern fast flawless printing techniques, it is just jaw-dropping, as you know.... Take care. Steve
A for thoroughness. D for audio background. C- for demarcation between different engraving processes. I learned a lot about the basics, but it was painful.
It's called a 'resist', it's a substance that stops the acid from reacting with the copper. Many substances can be used as resists, as long as it will not interact with the acid.
I am from india, How Can I connect with you ? Are you making the whole Electro mechanical engraving machine or you just making the cylinder We are looking for the same machine? Kindly reply
Are you Looking Expert Packaging Designer...!!!!? This is M KALIM_ Specializing in corporate and consumer product packaging design, make your business stand out among competitors, take your products to the next level and generate more sales also get with the right advice on Rotogravure Cylinder making & printing process (now working as a Graphic Designer at an international rotogravure cylinder manufacturer Company "Master Plate Making (BD) Co., Ltd. Let's build something wonderful together: Check my previous work: www.behance.net/mkalimbd
Now all I see is occasional Vision Elements, Inc(seriously?) flashing before my eyes and the sound of someone chewing in my ear. Interesting and all but why make it irritating?
Normando Faundo I have rotogravure printing machene and looking for help in pre press activity like cylender making. Please let me know about you and also send me your whatsapp number
satya reddy sir i just read your message rite now, im frm Philippines ,i work for cylinder plate making for 22 yrs,this is my no.+639085687949 omanfaundo@gmail.com or nfaundo@yahoo.com
satya reddy i also work in rotogravure printing,have knowledge on proofing machine and slitting. , I started to work on cylinder making frm manual procedure or what we call the chemical etching procedure,then afterwards new technology came,the engraving cylinder processing.what can i help u sir,do you have an fb account?
this is without doubt.. the BEST video I have seen on the Gravure Printing Process.. Educational and entertaining.. Well done and Thank You!!!
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
polishing belt,
polishing cloth wheel,
polishing paste,
adhesive bonding and etc.
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
Very Nice and useful
Agreed! It’s always been so rusty!
@@Asmrcomicreadinghi
What a beautifully-tailored and highly-educative video. Technology wonders! A pleasure to watch and learn.
i am Professional Graphic designer...and i know much about pre press but i did not know what is Gravure printing unless a client came to me for designing to do a gravure printing....obviously there are much techinal differences even in desiging for Offset printing and Gravure printing...and all i want to say that this was the best video i have ever seen .... excellent and informative....Thumbs up (Y)
Call 9414138802
i want rotogravure cylinder machine contect +919879054321
I want to talk to you as we have to give order's
The technology of rotogravure printing was a new study to me.Daniel
Daniel Jogal sir i have a long experience in this kind of job ,if u want to put up a bussiness like this ,i can help you
great video!
Lively Explaination🎉✨💫🙏🏻🙏🏻
hello, i'm a russian student, pls help me to understand 1 thing in this field. What does the "band" and "no band" mean? How it binding with cylinder type?
Had no idea this process was so involved. Guessing it's one of the best processes as it seems extremely time consuming.
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
Don't know how I got here, but once again the algorithm blows my mind, because I am TOTALLY interested in learning obscure technical/industrial processes.
The algorithm just seems to KNOW exactly which totally random videos that I will like, and sometimes it's right on, and it feeds them to me one after another.. and other times, it seems like it thinks I'm someone else, because it will show me one garbage video after another and I can skip 50 videos in a row without being slightly interested in a single one of them. Go figure.
FYI this is not obscure, this is a world-wide renowned printing technique, used on hella packages. Perhaps more popular in Europe though, if you weren't aware of it.
~Student who's a media technologist
thank you, excellent video
Before filling the polishmaster air bar do we need to put off machine or we on it? Pls help
Hi,
How is the excess ink removed from the cylinder face please ? I understand a "blade" can be used, but I can't see how this leaves a totally clean surface at thousands or revolutions per minute ? Thanks, Steve
chamber with 2 blades (negative and positive) is used for higher rpm, the colour circulates inside the chamber under pressure. Also a tiny layer of colour stays on the cylinder and cools down the blade (it dries befoe it reaches the printed material). Hard to understand, but it works.
Wow, that is hard to get your head around indeed. I hope to se it in practice soon at Polestar Sheffield. many thanks for your kind reply. Steve
I'm a printing student, so, little bit of revision there. You're welcome.
I am on the run from the small-litho printing trade using conventional Moleton damping. It was an uncontrolable "bitty" nightmare for 14 years !
I just love the "new" modern fast flawless printing techniques, it is just jaw-dropping, as you know....
Take care. Steve
a doctor blade does you have to change a few but last a while if put in the clamp right
A for thoroughness. D for audio background. C- for demarcation between different engraving processes. I learned a lot about the basics, but it was painful.
Nice l have heard a lot about this press
What are machinery used in cylinder preparation
why do we need a additional zinc layer in case of laser engraving ?
It will protect the underneath cylinder, and its easier to laser engrave in zinc layer as its softer than cu.
thank you
Im working at etching department almost 2 years 🙂
i want rotogravure cylinder machine please contect +919879054321
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
Very much informatic
Where can I find new gravure cyl manufactured locally close to Rosslyn Pta
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
Great. well understanding
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
rotogravure cylinder garet
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
What is the black layer in the third process?
It's called a 'resist', it's a substance that stops the acid from reacting with the copper. Many substances can be used as resists, as long as it will not interact with the acid.
what will be the price of electromechanical engraving machine
Annas Ali near 100 000 € Starts the the price
thank u
any opening with this job? rotogravure
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
I am from india, How Can I connect with you ? Are you making the whole Electro mechanical engraving machine or you just making the cylinder
We are looking for the same machine? Kindly reply
Are you Looking Expert Packaging Designer...!!!!?
This is M KALIM_ Specializing in corporate and consumer product packaging design, make your business stand out among competitors, take your products to the next level and generate more sales also get with the right advice on Rotogravure Cylinder making & printing process (now working as a Graphic Designer at an international rotogravure cylinder manufacturer Company "Master Plate Making (BD) Co., Ltd. Let's build something wonderful together:
Check my previous work: www.behance.net/mkalimbd
great
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
hayırlısı olsun yolun açık olsun.
Who's the animator??
what song is dis?
The only 'pre press solution' I could see was ferric chloride! Why don't you call a spade a spade instead of a 'digging solution?
GEIL
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
Now all I see is occasional Vision Elements, Inc(seriously?) flashing before my eyes and the sound of someone chewing in my ear. Interesting and all but why make it irritating?
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
Nice
is great
Nice beat
nice
Cost
I work on cylinder making and processing ,is there a job for this,or who wants to put up a bussiness like this ,i can work wid you,im frm Philippines.
Normando Faundo
I have rotogravure printing machene and looking for help in pre press activity like cylender making. Please let me know about you and also send me your whatsapp number
satya reddy sir i just read your message rite now, im frm Philippines ,i work for cylinder plate making for 22 yrs,this is my no.+639085687949 omanfaundo@gmail.com or nfaundo@yahoo.com
satya reddy i also work in rotogravure printing,have knowledge on proofing machine and slitting. , I started to work on cylinder making frm manual procedure or what we call the chemical etching procedure,then afterwards new technology came,the engraving cylinder processing.what can i help u sir,do you have an fb account?
Any engraving job available sir.
Consumables TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
polishing belt,
polishing cloth wheel,
polishing paste,
adhesive bonding and etc.
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
Hi I want to print 500 ml capacity milk bag above 51 micron , can you help me in that and contact with me
printing porablams sloshn videos with urdo tranclethin
Helo. Ma. Chrome. Opreter to. Grever. Cyelinder to. Job recust
Hi
We are from
Baba printing technology
Delhi
Mfg self adhesive printing label
This beat is really annoying...
like ,,vidio can study more engrave print
Jonaska turkey 💝💝💝❤
GGGGGGGG
Coool
TWITTER:@Andywan57365208
The gravure printing products include:
grinding wheel(100#-6000#),
engraving stylus(90degree-130degree),
Andy Wang
Mob/WhatsApp/WeChat :+86 13933019071
EMAIL:andywang2099@gmail.com
gg gemink
vasteh i ned