One thing I always hated about body kits is when they don't blend well with body lines or look like pieces glued on. I like when everything is cohesive. That had nothing to do with your video just had an opinion. You did a fantastic job. Love it
Wow. That looks awesome. When I was growing up, I used to build model planes and cars. But not to this level. Especially finding the extra parts like you did with rims spoiler, nose piece, rear defuser, etc. Or the patience to make it look that good. In short, just - awesome simply awesome. Totally worth checking it out. Thanks.
I've been following your channel for quite a while now. I even got an RX7 Efini by Aoshima that I wanna customise sometime soon. You make things looks very simple and some details (like the seats) inspired me to start building my first car kit. Love your work!
Finished result looks great! The real car would need to have the left side rear overfender clearanced to allow the gas door to open and a harness bar would be more likely used inside as that harness angle can be dangerous to the passengers in the event of a crash! Your carbon effects look especially good!
Beautiful job. I learn a lot from watching your builds. One question - why did you apply the carbon fibre in two pieces on the trunk/boot rather than one? Aren’t you concerned about seams?
I love that airbrush. I have same one and for the money it’s just as good, if not better than an Iwata. Quality build bro. Love the color.. an orange accent somewhere would set it off. 😊
So looking to get started collecting custom 1/24 scale, i'm sure most people build these and keep them in their collection, but are there people who build and sell? if so where would be the best place to look? any good IG pages to follow? ebay?
@JHHobby you do great job where do you get the wide body kit from. I what to the the tools you use to build your models. Because I have no I idea what tools to buy to make building and modified models easier.
An hour massaging the carbon decal??? When i tried carbon decal on a hood and seats, ... after 10minutes they got damaged while massaging trying to get the wrinkles out due to softener 🤷♂️😢
It also took me around 1 hour, using a Q-tip to very gently push out the air bubbles. I also used the same Mr. Mark Softer, but only small amounts where needed.
can't even imagine the craftsmanship needed for this, well done mr JH!
Thanks man!
You make this look incredibly easy, a true testiment to your skills and attention to detail. Can't wait to see what's next!
One thing I always hated about body kits is when they don't blend well with body lines or look like pieces glued on. I like when everything is cohesive. That had nothing to do with your video just had an opinion. You did a fantastic job. Love it
Wow. That looks awesome. When I was growing up, I used to build model planes and cars. But not to this level. Especially finding the extra parts like you did with rims spoiler, nose piece, rear defuser, etc. Or the patience to make it look that good. In short, just - awesome simply awesome. Totally worth checking it out. Thanks.
It's the completion of a very cool Lancer Evolution. 👏👏👏👏👏
Precioso coche
I've been following your channel for quite a while now. I even got an RX7 Efini by Aoshima that I wanna customise sometime soon. You make things looks very simple and some details (like the seats) inspired me to start building my first car kit. Love your work!
Thank you so much for your support! Welcome to the hobby😁
How did it turn out? He does make it look much easier than it is but it gets better with time
Can you do a separate video of all the essential tools you need to make a model and where you get them from??
Would love to get into making models
Brilliant. That wheel positioning on the dash was a disgrace.
Hahaha yup🤣 fujimi quality😂
Wow! So many hours spent on this! Beatuful work! Never thought it would take that amount of glue and paint)
your videos are soo relaxing
Glad you like them!
The master at work, stunning in every way… ❤
Thank you! Cheers!
Fantastic work as always..!!!
Paint- and Decalwork are excellent!!
Looking forward to your next build, mate.
detailed even down to the rotors. amazing!
Un trabajo hermoso
Half hour well spent watching!!!❤
Thank you so much!
Nice lancer man this week I build nissan skyline r34 Nismo edition
Awesome! 🙌
180sx, please... 🙏
Awesome job even with a poor quality kit from Fujimi you. Love the customization and how you made the kit that much better. Keep up the good work.
Well worth the time and effort, turned out great
Thanks man!
Awesome.. was a pleasure seeing you build this amazing Evolution once again, in one whole video. Super well done my friend.
Thank you! Cheers!
Holy s**t! JH does it again! Total perfection. That's all I need to say about that haha
Thank you for the amazing content and keep up the great work!
This may help keep oneself busy 😅😅
This is cool and imagine if it was a rc car
@henryl22 I think it's possible
As someone who's built that vehicle, I think the box is pretty old compared to when I bought it
Finished result looks great! The real car would need to have the left side rear overfender clearanced to allow the gas door to open and a harness bar would be more likely used inside as that harness angle can be dangerous to the passengers in the event of a crash!
Your carbon effects look especially good!
Amazing job ! The licence plate say "EVO 8" but it's an EVO 9 :p
A great build, the look's fantastic!
Thanks a bunch!
god DAMN that paint job is FRESHHHHHHH 13:45
17:34 I would love to know what brand silver you're using there. I know it's a small part, but that coverage looks insanely good.
Looks incredible
Beautiful job. I learn a lot from watching your builds. One question - why did you apply the carbon fibre in two pieces on the trunk/boot rather than one? Aren’t you concerned about seams?
Thanks man! Sometime one piece is abit too difficult to apply😅
man that was awesome to watch, time dedication and patients wow stunning model i love it and i love this video well done
Bruh the middle of the steering wheel is straight up a pokebal😂
Hahaha yup🤣
Superb!! Make it look too easy!
Incredible, as usual! Question, which glue do you use at the end, to glue wings etc. on to the clear coated body?
Thanks man! For painted parts normally i will use thick slow drying glue like UHU, but for really really small parts i will use liquid super glue
This looks so realistic compared to autoart and mr collection if they make this you do a great job ❤️❤️ appreciate your work
Thank you so much 😀
Amazing job! Congratulations !!
Beautiful one, nice work
Thank you! Cheers!
super detail job man...
This isn't widebody...... This is HE ATTACC HE PROTECC HE EVO SPECCC
But most importantly, HE TIME attac btw sick model, feels like premade papercraft parts, just glue and do stuff, Finish!
Really Amazing, nice job 😊
Very,very nice build !!
Thank you very much!
Nice man, I wish I was talented
Great job!😮
Thank you!
amazing build 🔥 , but sadly the wheels cannot spinning ;( . overall its good and fit well 👍🏿
Awesome build it is clean.
Thanks!
I love that airbrush. I have same one and for the money it’s just as good, if not better than an Iwata. Quality build bro. Love the color.. an orange accent somewhere would set it off. 😊
Yea man love this airbrush so much too!
Superb 👍
Thanks 🤗
Wow great work! You are Crazy
Masterpiece 🔥🔥🔥
Awesome job with that trans kit
Thanks man!😁
Very cool 👌
nice evo👍
This is really a very cool job. I'll be making models myself soon. I wanted to ask, what brand of paint did you use to paint the model?
太美了 這台
Wow your work is always amazing. i saw the name on the glue so now I have to ask you ahaha are you from Italy?
Thanks! Nope I'm from malaysia
Osm Dude
So looking to get started collecting custom 1/24 scale, i'm sure most people build these and keep them in their collection, but are there people who build and sell? if so where would be the best place to look? any good IG pages to follow? ebay?
Nice work! Do you have a link to exact same model?
nice
Wow!!!
love it
You sir have some patience 😅
🔥🔥🔥
ma sei italiano? hai un negozio per caso? complimenti per i video!!
why didn't use the embossing powder for interior? it will be much nicer i think
Can you do a video of all the tools and items you use please
I will try to make another very details video next time😁
@JHHobby you do great job where do you get the wide body kit from.
I what to the the tools you use to build your models. Because I have no I idea what tools to buy to make building and modified models easier.
Nice!
Do your ever sell these?
Actually this is a commision build😂
You know you should add electronics. Arduinos are your best friend.
The website you listed dont ship to usa 😢
How much is the wheelbase measure?
250 hours? Curious how long that is in total time including time not spent working. Must be 3-4 months?
Yes around 2 months😅
Szia, mivel rögzízetted az autót a vitrin aljához?
I have a question, can the wheels of these model cars turn? :v
Малодец
Hummmmm already got idea need for speed most wanted Eral car lol
Where I can buy??
where to buy ?
I want to request for damaged or crushed model
NFS.PayBack😅
Its my dream car🥹
An hour massaging the carbon decal??? When i tried carbon decal on a hood and seats, ... after 10minutes they got damaged while massaging trying to get the wrinkles out due to softener 🤷♂️😢
It also took me around 1 hour, using a Q-tip to very gently push out the air bubbles. I also used the same Mr. Mark Softer, but only small amounts where needed.
your work is very good, i'm new to this channel i want to see a bugatti what do you say bro please any bugatti, i hope you can do it bro