The confidence from then to now is completely different in your dialog. Lol much better these days, and editing as well. Keep'em coming boys see ya in a few days!
Thank for the Ram content. I'm the local shop is installing a Rough Country 3.5" lift kit with the lifted strut option. The local guys are pretty insistent that I wont be able to run 33x12 tires.
Subbed. We just bought a 2019 Ram 1500 Classic. Blank slate. First mods will be 2.5 leveling kit and thanks to this video I just picked wheels and tires. Love the stance of this truck.
Ditto I have a 2016 sport like this in blue streak pearl. Love these rims found my selection. Already have the 2 inch leveling kit, running duratracs on the stock 20s.
I hope the ball joints don't pop on that truck. I've got a 15 just like it except red. I've been hearing these 13's and up are having ball joints pop with spacer lifts. Guys have been doing the bilstein 5100 adjustable struts to lift it which keeps the suspension travel in factory specs
I don't think it's as widespread as the forums make it out to be. I have a 2014 that has been either leveled/6"lift on the factory UCA for it's entire 36k mile life and my ball joints are fine. But yeah, the Bilstein's are the way to go for leveling.
Bryan Feltner yeah i heard the level kits do something wit the ball joints. i have a 2016 torred sport and i ran into a guy that put on the bilstein shocks and luvs the look and ride.
I have a 2014 ram leveled with a 2.5 in rough country spacer when I was getting new wheels and tires put on a month ago I the front edge of the upper ball joint had come unseated from the uca. I had been running the level for about 1.5 years. So I ended up putting on the zone off-road heavy duty uca kit that moves the geometry of the uca to take the stress off the ball joint. Pretty easy install and look good too
love your videos and also have a question I want to put some 20x10 with some 33s on a 2017 Chevy Silverado 2 wheel drive do I need a lift kit or just a leveling kit workout trimming anything on the truck thank you guys
I know it's been quite some time and this is more or less the setup I'm looking, however, you mentioned that by "leveling" the truck you were able to "fit"... I have a bone-stock 2014 RAM 1500 4WD Crew Cab with 20" OEM wheels. I'm looking to install 20x10 -24 with 275/60 FALKEN WILDPEAK AT tires. I may go up to 33x12.5 but still not sure about fitment. Should I understand that the truck should be leveled before, to ensure fitment? I've already been through your website and even though there are a few people running the same size in stock suspension, some other websites call for modification or leveling before trying to "fit" the set up I want. Any recommendation?
There are some trucks with the same setup on our gallery that required no trimming while still on the stock suspension. You can check it out here! www.customwheeloffset.com/wheel-offset-gallery?make=Ram&model=1500&order=&tire_height_from=275&tire_height_to=275&wheel_diameter_from=20&wheel_diameter_to=20&wheel_width_from=10.0&wheel_width_to=10.0&year=2014&page=3
I have this exact setup on my stock 2018 ram SLT, no trimming, no rubbing, no mods. The truck is bone stock and the wheels fit perfect. Hit me up in you want more info or would like some pictures. One thing to keep in mind is that depending on the tires you choose the actual size of the tire will change. Some 33x12.5 inch tires are actually 32.76x12.4 for example.
About to buy the same rims but I don’t know if I should get the 20x12 -44 or the 20x10-24. I don’t want them to be sticking out far. I don’t know which offset to do. The truck is leveled
I have this exact setup on my 18 Ram, no lift, no level, bone stock and it fits with no rubbing. I did no trimming or any modifications to fit the wheels. Send me a message if you want to know more or want pictures.
That stance and look is PERFECT for a leveled truck!!!!!! AND THAT COLOUR!!!!
Want to do that to my 2005 dodge ram 1500 Daytona, same size wheels/tires and have em stick out 2 inches, SHE WOULD LOOK MEAN
....
I'll watch Dodge Ram videos all day!, keep them coming!!
I'll watch Ram vids all day
Can't wait! Mine should be arriving this week! 20x10 12.5 33s on my 2014 Ram 1500 with a 2.5 level. I'm stoked
Rams are beautiful. That color with black looks nice . Debadging is the way to go . First thing I did when I got my truck .
The confidence from then to now is completely different in your dialog. Lol much better these days, and editing as well. Keep'em coming boys see ya in a few days!
Thanks for the love!🤙
Thank for the Ram content. I'm the local shop is installing a Rough
Country 3.5" lift kit with the lifted strut option. The local guys are
pretty insistent that I wont be able to run 33x12 tires.
Vid rams all day I’d watch them
Subbed. We just bought a 2019 Ram 1500 Classic. Blank slate. First mods will be 2.5 leveling kit and thanks to this video I just picked wheels and tires. Love the stance of this truck.
🤘🏼
Gonna lol sick bro👍😎
Ditto I have a 2016 sport like this in blue streak pearl. Love these rims found my selection. Already have the 2 inch leveling kit, running duratracs on the stock 20s.
Ben Martin ,hey brother,have you had any suspension issues like clonking noises or maybe hard odd ride quality whatsoever with the leveling kit?
Did you install the leveling kit yet? And also have you had any issues with it? Like weird noises or lack of quality on the ride or anything else?
My 2015 Eco is at Les Schwab now getting it 2' level and alignment. I can wait to throw my 33s on my wife bought me for my bday!
should’ve left on hemi badge but it’s still badass you’d know it’s a hemi when you hear it down the st
Let's see a gen 4 with 12" wide wheels running 35's
Good videos, please put overall heights in videos. Good to know for people who have to use parking garages.
What kind of exhaust system did 1500 ram have on it cause it sounded so clean and deep tone to it.
What exhaust system ?
Sounds like the carven progressive series
Just caught up to this one, RAM’s, all day long!
What is done to the exhaust on that truck? Sounds great!
back to using those crisp one dollar bills for lip sizing....
I like to hear them say it, thats why I actually watch the video instead of just reading the title. 😅 but my bad, size was in the title.
😂😂😂 He pulled out a dollar for lip test 😂😂😂....hell naw!!!!
man I wish I can get my truck on there...my RAM has the same color. looks fresh to deaf in the summer!
no let's gooo??!!!??? Come on just cause the boss man is on vacation doesn't mean us viewers don't have standards!
I’ll like to see a set up of 20x10’s -25 offset with 35’s and 6 inch lift kit!
What is the exhaust system on it ?
Great video love the truck, would love to see more OBS Chevy's
About to buy these for my 11 Ram!
How much for same rim and tire set up for same truck?
Lol wheel test he uses 1 dollar bill while his boss uses 100 bill now we know who makes the money really u guys make great videos
Detailed video on trimming for gmc sierra 14-17 please...
I want to see -12 vs -24mm how big of a difference is it
Trying to find videos or pics of 2009 to 2017 Ram 1500 with 0 offset rims and stock or near stock sized tires.... Have any?
Gray, check our gallery out for fitment help! bit.ly/2pO5Zdt
I'm running these same wheels, but with Nitto Trail Grapplers
Love that color!!
What exhaust is on the truck?
Justin Kix we need to know, it sounds mean
Justin Kix whatever it is, it's just a muffler swap
Most likely muffler delete with a Y-pipe. (Got my ram done with that set up).
Or muffler swap Carven R-Type exhaust.
Custom offsets let us know what exhaust lol putting carven tr on my ram this Friday July 3
Would love to see more obs Chevys
I hope the ball joints don't pop on that truck. I've got a 15 just like it except red. I've been hearing these 13's and up are having ball joints pop with spacer lifts. Guys have been doing the bilstein 5100 adjustable struts to lift it which keeps the suspension travel in factory specs
I don't think it's as widespread as the forums make it out to be. I have a 2014 that has been either leveled/6"lift on the factory UCA for it's entire 36k mile life and my ball joints are fine. But yeah, the Bilstein's are the way to go for leveling.
Bryan Feltner yeah i heard the level kits do something wit the ball joints. i have a 2016 torred sport and i ran into a guy that put on the bilstein shocks and luvs the look and ride.
I have a 2014 ram leveled with a 2.5 in rough country spacer when I was getting new wheels and tires put on a month ago I the front edge of the upper ball joint had come unseated from the uca. I had been running the level for about 1.5 years. So I ended up putting on the zone off-road heavy duty uca kit that moves the geometry of the uca to take the stress off the ball joint. Pretty easy install and look good too
Would you have to do the leveling kit? Or would they fit stock?
Do you guys know what exhaust is on this?
What about same set up with 35s?
love your videos and also have a question I want to put some 20x10 with some 33s on a 2017 Chevy Silverado 2 wheel drive do I need a lift kit or just a leveling kit workout trimming anything on the truck thank you guys
That is a badass truck
You think this truck in a 6 inch lift would look good with 35s and 20x14s or to wide and stick with 20x12
Check our gallery out of trucks just like that here! bit.ly/2wb53Do
I know it's been quite some time and this is more or less the setup I'm looking, however, you mentioned that by "leveling" the truck you were able to "fit"...
I have a bone-stock 2014 RAM 1500 4WD Crew Cab with 20" OEM wheels. I'm looking to install 20x10 -24 with 275/60 FALKEN WILDPEAK AT tires. I may go up to 33x12.5 but still not sure about fitment. Should I understand that the truck should be leveled before, to ensure fitment?
I've already been through your website and even though there are a few people running the same size in stock suspension, some other websites call for modification or leveling before trying to "fit" the set up I want.
Any recommendation?
There are some trucks with the same setup on our gallery that required no trimming while still on the stock suspension. You can check it out here!
www.customwheeloffset.com/wheel-offset-gallery?make=Ram&model=1500&order=&tire_height_from=275&tire_height_to=275&wheel_diameter_from=20&wheel_diameter_to=20&wheel_width_from=10.0&wheel_width_to=10.0&year=2014&page=3
I have this exact setup on my stock 2018 ram SLT, no trimming, no rubbing, no mods. The truck is bone stock and the wheels fit perfect. Hit me up in you want more info or would like some pictures. One thing to keep in mind is that depending on the tires you choose the actual size of the tire will change. Some 33x12.5 inch tires are actually 32.76x12.4 for example.
you guys need to have more mini trucks for sure!
What is the set up on the black chevy in your intro video?
I have this truck in the sport edition, and want the same setup. With the level, will my air suspension still function properly?
For the air suspension portion shoot us an email to info@customoffsets.com, as for the rest check the description for links!
RAM HEMI all day
..
Is there any leveling kit that gets the geometry on that upper control arm back to original?
Kelly, kit wise no. But theres a possibilty aftermarket arms would work with it.
Is it the offset that makes the tires budge out? So if I wanted less of that would I go with a -18 offset
James Barker yea negative offset pushes out positive offset pushes in, 0 offset the hub bolts right in the center of the rim
Are there any issues with the TGC 2 inch leveling kit and the upper ball joints failing?
Not that we've ever heard
I got same size wheel & i got allterain tires is it normal if the truck shakes? My trucked is leveled i need you guys help Thank You!
We would need to know a little more information, please send an email to info@customoffsets.com and they should be able to help you out with that!
Did you have an alignment done after the truck was levelled?
Whats the gas milage difference when you slap these on compared to factory ?
It will vary on your driving style and terrain as well as other factors! Search forums to see what others with similar builds ended up having!
I have the same setup on my RAM except mine are -12 offset wheels. My mpg went from 17 mpg to 15 mpg
0:53 That sounds mean, whats the exhaust set up??
Check out the competitor series by carven thats what I'm running on mine
How much for same setup including installation on 2016 ram 1500 sports crew cab?
Than ks
price for parts can be found in the description!
Have the same truck with chrome 18x10 962's and 35's
Did you just level it and fit 35"?
What kind of headlights are those?
About to buy the same rims but I don’t know if I should get the 20x12 -44 or the 20x10-24. I don’t want them to be sticking out far. I don’t know which offset to do. The truck is leveled
I have a 20x10 on mine and the stick out is perfect for me
Would I be able to use this set up with 295/60/20s??
@customoffsets what leveling kit company did you use ? I have 15’ Ram
we use a few. check out our levels here- bit.ly/2yGe8su
2012 ram with 20x10 o offset wheels with 1 1/2 inch spacers will a 295 55 20 tire work
Check our gallery out for fitment help - bit.ly/2oLwRvD
I have a 2017 Big horn ram 1500 would I be able to clear a 20×12 with 33" tires on a stock air ride suspension?
Gabe for fitment help hit up our gallery for everything you'd need to know! customoffsets.com/gallery !
Custom Offsets thanks for the help!
Would that setup fit on a 2001 Dodge ram 1500?
Do a 20/12 man please
Why does everyone go 33x12.5. I feel like a 34"-35" with 10.5"-11.5" would look a lot better.
Can i put on my 2009 dodge ram 20x12 -44 if my truck is no lifted?
Would depend on what tire size you use, check our gallery out - bit.ly/2a3PHXv
leveled with 2.5 ? whats that exhaust
Where’s the hood from?
What exhaust is that? 😯
what do y'all think the weight of this tire and rim setup would be?
Unsure on specific weight Keith
I got a 2005 ram you think this tire set up would fit?
Smoove, check our gallery out for fitment help bit.ly/2a3PHXv
Do you guys do tent
exaust on it ??
any rubbing? I literally called a shop today to do this exact setup and he said 2.5 level isn't enough.
Philip Anthony I did same setup no issues at all
I have this exact setup on my 18 Ram, no lift, no level, bone stock and it fits with no rubbing. I did no trimming or any modifications to fit the wheels. Send me a message if you want to know more or want pictures.
How much was this all
Click the links in description for pricing information!
2nd gen builds !!!!!!
Whats the exhaust ?
what kind of gas mileage differences are you noticing compared to stock?
this is a very mild seutp, so you won't see much. But thats the price of lookin badass mike!
You need more jeep builds!
😍😍😍😍
Should've wash the truck
Are you able to level ram rebel 1500 with air ride suspension?
Send us an email to info@customoffsets.com and our lift kit expert can help you out!
No. The air suspension with different height settings are all you'll get on the rebel. That's a trade off of having the smoother air ride.
Actually yes you can. Install Daystar kc09113bk level and a set of adjustable links works perfectly on Ram 1500 with air suspension
Is this in Appleton, WI?
Our headquarters is located in Appleton, Wi yes!
Bad Ass thanks for sharing
More Chevy!
What exhaust is he running? Sounds mean.
Not entirely sure whats on it for exhaust!
what size tires ??
seriously?
yeah, seriously, he never said. they're 33x12.5
Andrew C yeah seriously, some viewers are trying to understand what fits and all info is helpful.
gh987 it says it on the title of the video. 😒
lmao I feel like sometimes people are just missing a couple of chromosomes.
Would 20x12s fit on this leveling kit without trimming?
Adrian Uriostegui would possibly need to trim some of the front valance. Check out their site, it's what they're known for... ya know.
Yes they would, some 20x12 with a -44 offset on some 33x12.5 would fit perfectly on a leveled Ram without any trimming
That color tho
#MoreRamsPlease
wheels not wide enough
what's the exhaust and tire size
Thanks love this build
Is the truck a 4x4
Very shRp
where the tundras at
what's the offset on the wheels?
Ley Rucker I would say like a -24 offset. It's pretty standard for a 10 wide
Juan is correct its a -24
I swear almost every truck is on motos. Get original people
more older chevys
Oh look! Black wheels never seen that before 🙄
you can't do the bill test with out a 100 dollar bill what with the 1 dollar bill ........lol
WTF is that intro??
Will a -18 offset work?
I heard these levels tear up upper control arms have a solution ?
If you go more than 2.5 inches you should think about beefier upper control arms