I hate how this kit uses a frame that has to have so much added to it, it's ridiculous. No wonder why so many people hate this RG. At this point just make a new original frame for this MS. I really hope rg 2.0 becomes a thing
Just built the kit for the first time and I completely agree. Must have taken a lot of work to figure out how to adapt and add new parts. Of course, it didn't work out and had this kit been made today it would have got an inner frame like current RG kits. I tried to strengthen the waist with a U shaped piece of plastic carved from the leftover runner. It worked for a bit but in the end I took the ball joint out and put a couple of layers of superglue on the ball. Seems to have made it tighter, but not perfect.
the amount of detail this kit has trully amazes me the fact that evrythings is goldplated plastic instead of stickers is just perfect not even the master grade variants didn't have it deffinitly picking this up saturday
so for anyone who didn't know, RG Sinanju is just a RG MK2 playing dressup as Sinanju because they shared roughly similar inner frame outside of few additions. But because of more plates used on Sinanju and the old frame can only do as much, the structural rigidity is pretty much a lot more slippery for this kit as it can't support his own backpack and can't hold hia weapon high enough.
I guess you had a hard time with this thing. But, very beautiful build process and I love the finished results. In terms of stability, I may just settle for the High Grade though. Nice video, bro.
Be carful of the waist it’s very lose, and sense the kit has such a large back back it tends to lean back, unless you do something to the joint to make it stiffer
Beautiful kit. Need to have a base if you get this one. It doesn't like to stand on its own. Even with that issue, enjoyed the build and hope to pose mine with the RX-0 lots.
This comment comes from somebody who’s had this kit I would not recommend this kit it is crap plain and simple I would recommend getting the master grade
Some parts are, such as the knee and the front edge of the feet. But it isn't a typically fragile build. Want to see some fragile builds? Buy a Destiny Gundam and you'll know what I'm talking about.
as a builder the one of the most rare and historical kit that I main to get it here in Phil's that I spend to kitbash the red machine of #ZEON.#SLEEVES
Okay, for real though, why do they print the post that goes inside the head with clear plastic if they expect you to put a sticker on it and then cover every other piece of it? Like, seriously it is the only clear piece in the entire kit, with its own special extrusion section on the runner it's on, and you can't even see it. I guess maybe that's what makes it real grade? IDK.
Do you like the video? Subscribe and Thumb up!
what do you think about the kits articulation and its joints? Ive see alot of reviews of this kit having loose parts all over the place
+Michael Pimentel it's too loose to pose and very unstable.
+BUILDERs TV yeah and the red is very glossy
+Michael Pimentel at the little parts many loose, not recommended for first build RG
Will u do a hg Grimgerde build?..
재밌었다면, 좋아요와 구독 ㄱㄱ!
ㄱㄱ
눌럿슴돠
니퍼 바꾸신듯...?
+방준호 ㅗ
+방준호 에휴~~
I hate how this kit uses a frame that has to have so much added to it, it's ridiculous. No wonder why so many people hate this RG. At this point just make a new original frame for this MS. I really hope rg 2.0 becomes a thing
your prayers have been answered
@@na-ok2pkBut the question is, will they make an RG Sinanju 2.0?
Kind of impressive how they adapted the Mk II inner frame for this design. Such a shame it didn't quite work out
Just built the kit for the first time and I completely agree. Must have taken a lot of work to figure out how to adapt and add new parts. Of course, it didn't work out and had this kit been made today it would have got an inner frame like current RG kits.
I tried to strengthen the waist with a U shaped piece of plastic carved from the leftover runner. It worked for a bit but in the end I took the ball joint out and put a couple of layers of superglue on the ball. Seems to have made it tighter, but not perfect.
daamn look at how you put that stickers soo smoothly, I'm too scared to put if it's in wrong position so I have to attached and detached so often. lol
Hendi Putra I don’t understand the stickers because most of the time there all almost completely covered
@@Kodaiva yup. So i don't even bother to stick it
Get a third party waterslides, make your job a lot easier
Yea my hands are shaking when putting a sticker
the amount of detail this kit has trully amazes me the fact that evrythings is goldplated plastic instead of stickers is just perfect not even the master grade variants didn't have it deffinitly picking this up saturday
But severely lacks stability
@@elementxxrider the hg is more better
@@shadowxreviews9887 never thought I'd ever agree with an hg being better than it's rg iteration. And here I am, doing just that.
I built this 4 years ago :))
-take parts by hands
- wrong position parts
- *NO STICKERS*
Ouch
Red ,mono eye = the god of zaku (sinanju)
2.0 Sinanju when? Should’ve done the gold like this on the Ver Ka
This is no zaku boy. No zaku!
@@michaeldelcastillo7211 if there is 2.0,you might wait a decade for it, I say this kit is average in term of inner frame, have seen worse
Guess what ?!Rg 2.0 is now a thing!
I would prefer the hg.Because hg is the same as rg and easier,it has the same weapons from the rg too
Beautiful hand grenade
요새는 RG가 MG만큼이나 잘 나와주는거 같아요
잭e님 정말 잘 만드시네요 프라장인의 손길이 느껴진다!!!!!
so for anyone who didn't know, RG Sinanju is just a RG MK2 playing dressup as Sinanju because they shared roughly similar inner frame outside of few additions. But because of more plates used on Sinanju and the old frame can only do as much, the structural rigidity is pretty much a lot more slippery for this kit as it can't support his own backpack and can't hold hia weapon high enough.
Wow you are amazing builders in my moment I like your sinanju and sazabi and unicorn Gundam and every thing I like it
Your so cool at speed builds you are a cool guy
seen this kit on amazon and was considering getting it, now watching this video, I'm pulling that trigger and getting it. thx
2 years later, how was the build?
Best looking mobile suit to date imo
did you encounter any problems when it comes to the sturdiness of the kit?
Had to look up if the part B5 was supposed to look odd after turning it 180. Glad to see similar result at 4:30.
I guess you had a hard time with this thing. But, very beautiful build process and I love the finished results.
In terms of stability, I may just settle for the High Grade though.
Nice video, bro.
I'm about to get this kit, you have any advice about buiding this? It seems quite a troublesome kit
+Trunkv _X_ you need a plamodel cutting nipper and plamodel cotton buds and a art knife
+나초승달 sorry for "a art knife" correctly it is an art knife
I had this kit, but it got destroyed
Be carful of the waist it’s very lose, and sense the kit has such a large back back it tends to lean back, unless you do something to the joint to make it stiffer
Beautiful kit. Need to have a base if you get this one. It doesn't like to stand on its own. Even with that issue, enjoyed the build and hope to pose mine with the RX-0 lots.
기다리는동안에 저도RG시난주 맟췄네요
금장이 매우훌륭한것 같아요
역시 시난주스맛 시난주스!
Beautiful colours on this sinanju
19분만에 조립하시다니 대단
kindman718 빠른조립아닙니까...
와대박이내요전보기만해도어질어질
오오옷! 내가젤좋아하는 시.난.주!
오오옷 정말멋있어욜!! 역시 잭이님은 금손이시네요!
beautiful model
why does my RG wing gundam look tiny compared to this beauty?
are there RG that are bigger than others?
Jay Kay thanks!!!
Zazabi
Gundams tend to differ in size depending on their origin. Wing Gundams are fairly small ( 15-16m ) compared to U.C gundams ( 18m and above)
낙지랑 무릎장갑 개선하고 프레임 새로 뽑았으면 반다이 인생 제품이였을텐데
저거 분할쩔어서 사고싶던데 얼마나 안좋나요?
@@Emilia.700 툭 치면 떨어져요
@@Emilia.700 그냥 본드칠하는 걸 추천드립니다
@@Emilia.700 허리가 되게 약한데. 그냥 툭치면 허리가 추욱 늘어집니다..
My favorite GUNPLA 🤘
YO THIS THING LOOKS SICK
와 내가 본 것 중에 제일멋짐
감탄 ㅠ;ㅠ
This comment comes from somebody who’s had this kit I would not recommend this kit it is crap plain and simple I would recommend getting the master grade
loved it so I liked it!!!!!!!!!
i have this kit and its a pain to pose
옹ㆍ으옹ㆍ으오오옹ㆍ 드디어!!!
I love gundam sinanju
no panel lining for rg sinanju?
rg sinanju is wlth coating gloss injection
its better to not panel line
I've got this one and the RG Sazabi coming!
소유욕이 불타오른다!!
nice build i will definitely buy this kit !
Hello is the this gunpla the about the size of a master grade because it looks to big for a normal thing and is the stand included?
드디어
드디어ㅜㅜ 기다렸어요~백식리바이브도 히니주세요ㅎ
Really nice looking kit.
Would you agree with other reviewers in saying that this kit has some fragility issues?
Some parts are, such as the knee and the front edge of the feet. But it isn't a typically fragile build. Want to see some fragile builds? Buy a Destiny Gundam and you'll know what I'm talking about.
완전잘만든다
That is so cool!!!👍👍👍
How do you get this lack of nubs on your kits? Or can we just not see them? Can you do a video on nubs, or tell me your process here?
could you please post HG fast build videos? Because I want to have a reference from you.
I'm your big fans by the way :D nice videos, love it!!!
is he ready to fight unicorn gundam
This kit is really glossy!
ㅇㄴ 난 시난주 만들었을때 코피 나고 9시간 걸렸는데...... (그는 그렇게 시난주를 보고 잠시 뇌정이가 왔더고한다.......라사고댜ㅗㅑㅛㅏ라ㅛㅑ하ㅑ샤랴햫)
안녕하세요
혹시 한정판 신안주 확장팩도 리뷰하시나요?
jack e님 mg 풀아머건담 썬더볼트랑 hg풀아머 유니콘 건담 안하신것같은데요 빨리 해주세요^^
Wow good gundam or maybee gunpla
글로스인젝션도 좋지만 개인적으로는 무광마감하면 더 이쁠거같네요ㅎ
this video is too nice!!!
유니콘이랑 풀아머 썬더볼트는 언제해요?
Would it fit on hg neo zeong narrative?
Thanks for video :)
풀 아머 건담 레드버전은?
This could have been one of the best RGs ever but bandai got too greedy and lazy and reused an old inner frame instead of making a new one
HG 시난주 있어서 RG 안샀는데 조립과정 보니 완전 다른 킷이네요ㄷㄷ
RG 지를까..;;
이제 막 입문할려는 사람인데용 저거원래 부품이 금장인가요??첫모델을 이걸로시작해보려고하는데 ㅎㅎㅎ
This thing absolutely needs to me matte clear coated.
only 3.8k yen!? on amazon, a hg sinanju costs that much😂😂😂
시난주에 들어있는 스티커 적식스티커인가요?
hi i want to ask you something did you already build the full armor unicorn gundam?
if yes where is the video
MG 풀아머 썬더볼트도 빨리 영상 올라오길 바라고있습니답
풀콘이 언제 리뷰하나요!!!(red color ver. hg)
시난주는 만드는게 약간 특이한듯 ㅎㅎ
Witch Shinanju is better MG or RG ?
If you saw the mg review..the emblem is stickers...i don t own both so id rilly know bout it
Please tell me you will be doing MG Heavy Arms Custom EW.
+Kevin Chan Limited products are not my target for BUILDERs TV, bro. But it i have chance to get, i wanna do that.
What is next?
curiosity level 100/10.
He usually upload the 1/144size
so cool
Sweet toons
as a builder the one of the most rare and historical kit that I main to get it here in Phil's that I spend to kitbash the red machine of #ZEON.#SLEEVES
hey builders im a big fan but im wondering i have only hgs should the next gunpla i get be mg or should i get a real grade
I think that main model lines of bandai are HG and RG. If I were you, I would concentrate both of them
thx for the reply and answer. also how sturdy are these rg gunpla
현제까지 만든것들 보여주세요 ^^
멋있다
Okay, for real though, why do they print the post that goes inside the head with clear plastic if they expect you to put a sticker on it and then cover every other piece of it? Like, seriously it is the only clear piece in the entire kit, with its own special extrusion section on the runner it's on, and you can't even see it. I guess maybe that's what makes it real grade? IDK.
스커트가 씰이 아닌것이 아주크군요 반다이의 기술력은 나날이 발전하는군요
특히 가슴팍 장식이....!
혹시 사포질 하시나요? 아님 아트나이프로만 게이트 제거하시나요?
시난주에 먹선은 안칠하나용?
풀아머 건담 조립 영상 은 안 하나요
RG는 데칼 많다고 들었는데 사실 인가여? 근데 프레임 때다가 ㅈ된 적은 있어여?
제가 이거 만들어본 소감이라면
RG 만든건 시난주로 2개째긴 하지만 후두둑이 너무 심했달까요
전 지금 오른팔 소매 파츠 하나가 어딘가로 사라져서 오른손을 못끼우게 돼버렸습니다
RG나오기 한달 전에 HG씰난주를 산 저는 웁니다..어엉
Is more better the hg version
빌더즈님 pg는 무리인가요? 된다면 벤시...
cool rg sinanju!!
Is this hard to build?
Cool!!!..awsome!!!...
☆GLOSS INJECTION☆
You build this sinanju without panel line???
👍