Cutting & Drilling PCB using the 20W redENERGY Pulsed Fiber Laser
HTML-код
- Опубликовано: 16 окт 2024
- In this video you can see our 20W pulsed fiber laser cutting & drilling through a PCB board. PCB’s are used everywhere in electronic technology; their convenient size, light weight and good strength properties allow for more compact circuits to be constructed. To see more of our cutting & drilling applications, go to our website at bit.ly/2R48cA6 for cutting and at bit.ly/2R6Itr6 for drilling.
Subscribe to our channel: / spilasers
Twitter: / spilasers
Facebook: / spilasers
LinkedIn: / spi-lasers
Does the laser include an auto-focus or are you manually refocusing as it cuts deeper?
Hello,Im new to pcb hobby making.So far i making boards with cnc router but is hard to have an accurate cut with vbits and pyramid bit(the 0.02 endmill break in my hand).I want to buy a fiber laser for pcb etching traces only.What do you suggesting me to buy?20-30-50w?Jpt - Raycus - Max?Mopa or Not?Desktop or seperate unit? RC1001 or SG7110 head?Im intrested up to 150x150mm diamensions boards.Thanks in advance.
Do you have detailed video?
price please.
What are the settings used?
they never tell you
@@TMS5100 Speed: 100, power 100% and freq. 20khz, about 50x (loop)
@@ORION-AC I was literally doing this yesterday with those exact settings after trial and error. Works well, even better if you make the cuts in sets of some number with a nice pause in between to let the PCB cool off some. A blowing fan works well too.
@@civedm Coward.
@@civedm did you have to refocus as the depth of became deeper?
So?