Hi, same problems like other people. Now, the battery is discharge in less than 2 minutes. The heli has difficulties to move forward. It 's a big problem. Please Andrej, can you find us a solution maybe in contacting directly RC Era. Thank you very much !
How you found out about this settings? Do you know any extra stuff that is not in the video, awesome little vid btw, thank you, so the tx auto changes the HS when you set the pitch, did I got it right?
I ordered mine with optical flow and I see the sensor but it it doesn’t stay in one spot . It constantly drifts around. Is there a way to maybe turn on the optical flow or something in case it’s off?
I reduced the angle by 2 sounds. It began to fly softer. By calibrating the gyroscope with the sticks, we reset all the settings! (I checked the trimmer and returned to zero again) these are the factory settings. He has a common stride. Must be able to do flips and inverted flight. for example, my second C 129 helicopter flips when you press the throttle trimmer. this C138 doesn't. I think you need to look for the secret of the remote control settings. This is not in the instructions. select combinations of various switches. or the manufacturer has more expensive remote controls for it to do this. you have to look for it yourself. This helicopter is a beautiful replica for flying at home. I would like to reveal all its possibilities. I think it's possible. We need to look
I was flying my stock, I just tried with max pitch, didn't worked, not even with the max trim left I could stop it to moving fast to the right, rolling, and, the battery was drained super quick.
I’ll put my heli together and I’ll try that. I’m pretty sure I screwed up the settings trying to change the head speed and now it seems like at some point the blades crash with the rear part of the heli. I’ll let you know how it goes. Thanks!
If in the basic setting, when moving the Pitch, I measure the maximum deviation with a Caliper and after the new setting, if necessary, I reset it there, would that be good? Thanks!
That begs the question then, do you like the default pitch setting? (ps my blue one hasn't shipped yet and I needed some thrill so I ordered the C190 too. You have one also don't you?)
At first I thought that the stock head speed was way too high but then I realised that it can't be much lower because the disc loading on this helicopter is relatively high - much higher than on other RC ERA helicopters which have rotors with 4 or 5 rotor blades. Yes, I have all of them. I am also waiting for the new C186MAX to arrive :)
@@gabriel-bl4ckh4wk-6 Do u condition the lipo the first use? I always charge it fully before any flight, then fully drain, then fully charge to max even unplug and plug in again? Iv got the advertised 8-10 mins out of mine. But u might have a different flying style to me. 😅
The only way I know is to manually apply changes and test ... you don't reset the transmitter as all the changes are stored in the flight controller ...
@@AndrejSturm But mine each time i turn it off or calibrate gyro he returns to default !!! and its anoying because its the no optical flow version and since the propellers and rotation off the chopter is to the left hes turning left and backwards alot when hovering ! have to calibrate manually each flight !
since I touch to that my copter go front impossible to trim now Thank .for nothing!!! how reset stock setting??????????????????????????????????????????????????????
You have to manually trim it back - the same procedure, just push the trim to the other direction ... (if you have previously increased the pitch, you now have to decrease it back to previous setting and vice versa).This is an advanced setting - this is the reason why the manufacturer doesn't include this in the manual as the person who performs this adjustments needs to know what he's doing. I am sorry for the trouble ... I hope you will be able to get it trimmed back.
@@AndrejSturm nothing work well now I have setting bac to the middle the trim of pitch , but now I have to set trim forward near the maximum to have stable hover, no stabilization camera on mine, I set the gyro reset but that do nothing . and during the fly the trim change with the batterie decharge .... very bad helico compare to my C185
Got this helicopter and realized that it’s a fake collective pitch function. As soon as you start and take off, the pitch angle is set to a certain position - but in the flight the helicopter is just rpm controlled - the collective stick input doesn’t effect the pitch angle of the blades at all. That’s absolutely pathetic. Is there a way to enable this function to fly it like a real helicopter?
I really hope so, cuz in every single ad that I saw, was saying 3D/6G 6CH, but after watching a lot of videos and getting my hands on one, it seems that was all fake ad, looks like another 4CH 6G helo from RC ERA, I really hope that this little fellow is hiding 3D mode somewhere, cuz 6G is already a lot of fun, but gets old after while. The C138 looks awesome, and bigger, if you compare to others, like the C186, that looks so small. In every single description on all the ads you got the same : Adopting a single blade aileron free design, with a 6-axis electronic gyroscope for stability enhancement and the addition of a barometer for altitude control, the flight is more stable and easier to control! Long battery life! Impact resistant! The appearance is scaled down in proportion to the actual aircraft, which can not only control flight but also serve as a decoration. The C138 has a battery life of about 12 minutes! (Optional optical flow positioning, additional accessories will be added in the future, please stay tuned!!!) Function introduction: 1. No aileron design, incorporating aerodynamic principles to design propellers that provide strong power and body stability. Using a 6-axis gyroscope for ultra stable flight; 2 6-channel design, 3 digital servos, adding 3D rolling for more fun; 3 main seat remote control, with a more delicate touch and more precise control; 4 Barometers set altitude for stable flight; 5-module humanized battery, intelligent power management system, battery level indicator, easy and fast installation, effective protection of the battery, and longer service life; 6. Special stunts such as ascent, descent, forward, backward, left flying, right flying, left spinning, right spinning, route flying, pot brushing, etc; 7 6G mode, using a 6-axis gyroscope, stable flight, especially suitable for beginners in flight; 8. Low voltage alarm, stall protection, loss of control protection, large and small rudder conversion, one click takeoff, one click landing and other functions; Equipped with a dedicated USB charger for fast and stable charging; Flight time: approximately 12 minutes Charging time: approximately 50 minutes Remote control mode: 2.4G remote control Remote control distance (meters): 80-100 meters Number of drive motors: two Battery details: 7.4V body, remote control 4 * 1.5AA (not included) Product accessory details: Color box packaging * 1, helicopter * 1, remote control * 1, manual * 1, USB charger * 1, main propeller * 2, tail propeller * 1, lithium battery * 1, screwdriver * 1, hex wrench
OMFG, just searched for the RC ERA website, there that single line is different than all the others ADs : "2. Equipped with 6 channels and 3 digital servos enhancing the fun factor." fk! Someone screw this up or was a scam, tf.
Holy crap, just checked the official website for the first time, and there, they have a single different line, the one that matters, fk ! : "Equipped with 6 channels and 3 digital servos enhancing the fun factor." lol, damn it. No 3D yeah. But I wonder, so why 6 instead of 4 channels? What the new ones does? Well, I just sent them a email asking about all this crap.
Well, I've just tested mine without it spinning, and it does change the collective pitch, a lot btw, is linked to the throttle stick and I don't think I hear much difference in the RPM.
@@gabriel-bl4ckh4wk-6 You have THREE (3) speed settings on the transmitter. That should give you a clue that the heli is pitch controlled at one of the THREE (3) speed options you choose. Got it?
Micro Bell 206: shorturl.at/L5npx
Coupon code: BG61975b
Thank you
Hi, same problems like other people. Now, the battery is discharge in less than 2 minutes. The heli has difficulties to move forward. It 's a big problem. Please Andrej, can you find us a solution maybe in contacting directly RC Era. Thank you very much !
Can this be also done with Radiomaster Tx16s, and if so what is the additional mixer setup required
How you found out about this settings? Do you know any extra stuff that is not in the video, awesome little vid btw, thank you, so the tx auto changes the HS when you set the pitch, did I got it right?
I ordered mine with optical flow and I see the sensor but it it doesn’t stay in one spot . It constantly drifts around. Is there a way to maybe turn on the optical flow or something in case it’s off?
I reduced the angle by 2 sounds. It began to fly softer. By calibrating the gyroscope with the sticks, we reset all the settings! (I checked the trimmer and returned to zero again) these are the factory settings. He has a common stride. Must be able to do flips and inverted flight. for example, my second C 129 helicopter flips when you press the throttle trimmer. this C138 doesn't. I think you need to look for the secret of the remote control settings. This is not in the instructions. select combinations of various switches.
or the manufacturer has more expensive remote controls for it to do this. you have to look for it yourself. This helicopter is a beautiful replica for flying at home. I would like to reveal all its possibilities. I think it's possible. We need to look
I was flying my stock, I just tried with max pitch, didn't worked, not even with the max trim left I could stop it to moving fast to the right, rolling, and, the battery was drained super quick.
he doesnt care
Can you do this on the Eachine E120? I have the same remote controller. Is it the same concept?
Does this heli have optical flow sensor?
@@bermeseco You can, it works on that heli too. Mine came without optical flow sensor.
I’ll put my heli together and I’ll try that. I’m pretty sure I screwed up the settings trying to change the head speed and now it seems like at some point the blades crash with the rear part of the heli. I’ll let you know how it goes. Thanks!
Can this also be done with TX16s if so what would be the radio setup?
If in the basic setting, when moving the Pitch, I measure the maximum deviation with a Caliper and after the new setting, if necessary, I reset it there, would that be good? Thanks!
I can already see that a Special RC tool would be really good for it. A Pitch Gauge.
That begs the question then, do you like the default pitch setting? (ps my blue one hasn't shipped yet and I needed some thrill so I ordered the C190 too. You have one also don't you?)
At first I thought that the stock head speed was way too high but then I realised that it can't be much lower because the disc loading on this helicopter is relatively high - much higher than on other RC ERA helicopters which have rotors with 4 or 5 rotor blades. Yes, I have all of them. I am also waiting for the new C186MAX to arrive :)
@@AndrejSturm Of course you are.. lol ♥️
@@gabriel-bl4ckh4wk-6 Do u condition the lipo the first use? I always charge it fully before any flight, then fully drain, then fully charge to max even unplug and plug in again? Iv got the advertised 8-10 mins out of mine. But u might have a different flying style to me. 😅
@@cjb405 Fully charge and discharge always too.
@@gabriel-bl4ckh4wk-6 what do you mean with "one atm btw" ???😮
motors on this heli brushless yes no?
No
Andre, in case I want to reset my transmitter back to default setting after making changes, how am I going to do it?
The only way I know is to manually apply changes and test ... you don't reset the transmitter as all the changes are stored in the flight controller ...
You will hear a beep every time the trim reaches the default settings, you're going to reset each trim.
@@AndrejSturm But mine each time i turn it off or calibrate gyro he returns to default !!! and its anoying because its the no optical flow version and since the propellers and rotation off the chopter is to the left hes turning left and backwards alot when hovering ! have to calibrate manually each flight !
@@AndrejSturm When you hear the longer beeeep, that's when you've hit the default setting, correct?
@@gabriel-bl4ckh4wk-6 I think that beep means the trim's in the middle....
since I touch to that my copter go front impossible to trim now Thank .for nothing!!! how reset stock setting??????????????????????????????????????????????????????
You have to manually trim it back - the same procedure, just push the trim to the other direction ... (if you have previously increased the pitch, you now have to decrease it back to previous setting and vice versa).This is an advanced setting - this is the reason why the manufacturer doesn't include this in the manual as the person who performs this adjustments needs to know what he's doing. I am sorry for the trouble ... I hope you will be able to get it trimmed back.
@@AndrejSturm nothing work well now I have setting bac to the middle the trim of pitch , but now I have to set trim forward near the maximum to have stable hover, no stabilization camera on mine, I set the gyro reset but that do nothing . and during the fly the trim change with the batterie decharge .... very bad helico compare to my C185
Got this helicopter and realized that it’s a fake collective pitch function. As soon as you start and take off, the pitch angle is set to a certain position - but in the flight the helicopter is just rpm controlled - the collective stick input doesn’t effect the pitch angle of the blades at all. That’s absolutely pathetic. Is there a way to enable this function to fly it like a real helicopter?
I really hope so, cuz in every single ad that I saw, was saying 3D/6G 6CH, but after watching a lot of videos and getting my hands on one, it seems that was all fake ad, looks like another 4CH 6G helo from RC ERA, I really hope that this little fellow is hiding 3D mode somewhere, cuz 6G is already a lot of fun, but gets old after while. The C138 looks awesome, and bigger, if you compare to others, like the C186, that looks so small. In every single description on all the ads you got the same :
Adopting a single blade aileron free design, with a 6-axis electronic gyroscope for stability enhancement and the addition of a barometer for altitude control, the flight is more stable and easier to control! Long battery life! Impact resistant! The appearance is scaled down in proportion to the actual aircraft, which can not only control flight but also serve as a decoration. The C138 has a battery life of about 12 minutes! (Optional optical flow positioning, additional accessories will be added in the future, please stay tuned!!!)
Function introduction:
1. No aileron design, incorporating aerodynamic principles to design propellers that provide strong power and body stability. Using a 6-axis gyroscope for ultra stable flight;
2 6-channel design, 3 digital servos, adding 3D rolling for more fun;
3 main seat remote control, with a more delicate touch and more precise control;
4 Barometers set altitude for stable flight;
5-module humanized battery, intelligent power management system, battery level indicator, easy and fast installation, effective protection of the battery, and longer service life;
6. Special stunts such as ascent, descent, forward, backward, left flying, right flying, left spinning, right spinning, route flying, pot brushing, etc;
7 6G mode, using a 6-axis gyroscope, stable flight, especially suitable for beginners in flight;
8. Low voltage alarm, stall protection, loss of control protection, large and small rudder conversion, one click takeoff, one click landing and other functions;
Equipped with a dedicated USB charger for fast and stable charging;
Flight time: approximately 12 minutes
Charging time: approximately 50 minutes
Remote control mode: 2.4G remote control
Remote control distance (meters): 80-100 meters
Number of drive motors: two
Battery details: 7.4V body, remote control 4 * 1.5AA (not included)
Product accessory details: Color box packaging * 1, helicopter * 1, remote control * 1, manual * 1, USB charger * 1, main propeller * 2, tail propeller * 1, lithium battery * 1, screwdriver * 1, hex wrench
OMFG, just searched for the RC ERA website, there that single line is different than all the others ADs : "2. Equipped with 6 channels and 3 digital servos enhancing the fun factor." fk! Someone screw this up or was a scam, tf.
Holy crap, just checked the official website for the first time, and there, they have a single different line, the one that matters, fk ! : "Equipped with 6 channels and 3 digital servos enhancing the fun factor." lol, damn it. No 3D yeah. But I wonder, so why 6 instead of 4 channels? What the new ones does? Well, I just sent them a email asking about all this crap.
Well, I've just tested mine without it spinning, and it does change the collective pitch, a lot btw, is linked to the throttle stick and I don't think I hear much difference in the RPM.
@@gabriel-bl4ckh4wk-6 You have THREE (3) speed settings on the transmitter. That should give you a clue that the heli is pitch controlled at one of the THREE (3) speed options you choose. Got it?