Extension board fault identify and repair

Поделиться
HTML-код
  • Опубликовано: 27 окт 2024

Комментарии • 63

  • @technicalkafi
    @technicalkafi 5 лет назад +1

    Nice video 👍 sar

  • @debasishroy7320
    @debasishroy7320 2 года назад +3

    Today only I bought this model of extension board. It was giving the same trouble. I wanted to do the same thing that you did. But that is absolutely wrong. I referred lot of vdos and book. It was ascertained that this type of problem comes only when earthing in your house is defective. I rectified earthing in the board of the house. Now it is perfect.

  • @Tselectricals
    @Tselectricals Год назад +1

    Very helpful presentation bhai ❤❤❤

  • @dheerajudupi2435
    @dheerajudupi2435 2 года назад +2

    Mine say ground open...
    Is it safe use this just phone charger to charge phone..where earthing is not necessary right?

  • @minakshikashyap8557
    @minakshikashyap8557 Месяц назад +1

    Hello sir, i am facing an issue related to this extension cord its showing fuse blown so u replaced it with 3amp fuse than i operated an iron through it, but after 5 mins it again blown out. What's the problem sir? Should i replace the 3amp fuse with 13amp.

    • @peopleeducationonline3219
      @peopleeducationonline3219  Месяц назад

      @@minakshikashyap8557 Iron takes high ampere current so this is advisable to not use iron on this type of extension board.

  • @vibhupv8007
    @vibhupv8007 7 месяцев назад +1

    This is not a solution. Replace the diodes and resisistors. Upgrade the resisters to 680K.

  • @deepaksahu6075
    @deepaksahu6075 Год назад +1

    He my fuse showing blown even after replacing it .for some days in emergency I used direct support without fuse by connecting both fuse ends with normal wire but now I bought fuse and replaced it but it's still showing fuse blown ?? And now even direct is showing fuse blown ..

  • @abhay3976
    @abhay3976 2 года назад +1

    What to do if 2 sockets of board are not working but other two are working fine?

  • @happydaysproductionmadurai7618
    @happydaysproductionmadurai7618 4 года назад +2

    Thanks for wonderful video. but my fuse internal circuit board blown away (I mean blue capacitor)... If I am cut the ground wire so I can use for phone charger.. ? Appreciate your help 😊.. thank you Sir ji.

    • @peopleeducationonline3219
      @peopleeducationonline3219  4 года назад +1

      Yes you can use it for phone charger, television, home theatre etc. Where earthing is not necessary

    • @happydaysproductionmadurai7618
      @happydaysproductionmadurai7618 4 года назад

      @@peopleeducationonline3219 thanks again for your help. Last question : can use laptop charger pin(3 pin plug) before cutting last question 🙏

  • @deepakdass2834
    @deepakdass2834 3 года назад +1

    Excellent video very helpful

  • @e4e086
    @e4e086 2 месяца назад

    I have same Extension board How do I fix broken buttons.

    • @peopleeducationonline3219
      @peopleeducationonline3219  2 месяца назад +1

      @@e4e086 change broken button

    • @e4e086
      @e4e086 2 месяца назад

      @@peopleeducationonline3219 is there any way to fix it???

  • @mohammedrikas1033
    @mohammedrikas1033 2 года назад +1

    What if the electricity passes through neutral wire and supply wire. How can i fix it?

  • @coolmonkey5269
    @coolmonkey5269 3 года назад

    when i put my tester into bull spike buster
    both holes, phase and neutral is glowing
    is it faulty or alright 🙄
    i need to use worh expensive computer

  • @perpetualprosperity2963
    @perpetualprosperity2963 2 года назад +1

    Why did you not fully repair the Surge Protector in the first place?🤦

  • @tanmaybag1651
    @tanmaybag1651 2 года назад +1

    What is the blue part name and capacity

    • @peopleeducationonline3219
      @peopleeducationonline3219  2 года назад

      Blue 🔵🔵 part name : capacitor
      Capacity in micro farad. Which is different on all capacitor. You have to read written over it

  • @rupamchutia2545
    @rupamchutia2545 2 года назад +1

    Re connection video please

  • @shiraag
    @shiraag 3 года назад +1

    My extension says Neutral Open. What do I do? pls advise...

    • @peopleeducationonline3219
      @peopleeducationonline3219  3 года назад +1

      Check both wire connection and if found open then connect.
      Before opening , disconnect from main electric supply

    • @shiraag
      @shiraag 3 года назад +2

      @@peopleeducationonline3219 I checked... The wires are all intact so I closed it back. It's working now but still says open neutral

  • @dwipthepunekarbiker
    @dwipthepunekarbiker 3 года назад

    Hi Bhai, Need urgent help..
    My spike guards light is showing on even after switching it off from spike guard button. Pehle aisa nahi hota tha

  • @aspirant5286
    @aspirant5286 3 года назад

    This blue 🔵 part blown what is that

  • @mrinmayrayya1199
    @mrinmayrayya1199 4 года назад +1

    Sir, Gnd. Op, Neu op, L&N Rev,L&G Rev ka function Kya Hain aur agar earthing fault ho yafir Ghar ka earthing tu Goya ho to konsa light glow korega

    • @peopleeducationonline3219
      @peopleeducationonline3219  4 года назад +1

      Grnd open means grnd wire open, neu open means neutral wire open, l & n rev means : line wire connected on neutral point and neutral wire connected on line wire point,
      If earthing wire broken then ground open light will glow

    • @mrinmayrayya1199
      @mrinmayrayya1199 4 года назад +1

      @@peopleeducationonline3219 or agar L&G Rev. Ho to iska mtlb Kya Hain?

    • @peopleeducationonline3219
      @peopleeducationonline3219  4 года назад

      @@mrinmayrayya1199 Line wire and ground wire connected

    • @mrinmayrayya1199
      @mrinmayrayya1199 4 года назад

      Aur Jo middle Wala light halksa kyu glow ho rehata Hain humesa

  • @hiteshpatel-pn6ku
    @hiteshpatel-pn6ku 4 года назад

    How to remove switch?? Because two switch is not working in my ancor board

    • @peopleeducationonline3219
      @peopleeducationonline3219  4 года назад

      If no screw available on switch then, press the switch outside

    • @hiteshpatel-pn6ku
      @hiteshpatel-pn6ku 4 года назад

      @@peopleeducationonline3219 screw is awailable but switch is dad,not having on off.so i remove every plug switch and direct my board.what can i do and how reconstructing my board without switch

    • @peopleeducationonline3219
      @peopleeducationonline3219  4 года назад

      @@hiteshpatel-pn6ku first wire connect with first pin and second wire with second pin

  • @Mr107057
    @Mr107057 4 года назад

    My extension box is indicating "Ground open"What to do ?

  • @harikrishna1172
    @harikrishna1172 4 года назад

    I dont hav circuit in spike...
    But after cutting green wire....the current is coming in green wire a d red wire ...

  • @Mokiralabharath
    @Mokiralabharath 4 года назад

    Hi sir...
    In my extension box , power coming in both plugs.
    Plz give me solution??

    • @peopleeducationonline3219
      @peopleeducationonline3219  4 года назад

      If fuse ok then bypass the electronic circuit and connect wire.

    • @cybermenindia
      @cybermenindia 4 года назад

      @@peopleeducationonline3219 isnt the whole purpose lost if you bypass the circuit. i see a diode in the circuit is the diode problem.

  • @KRISHANKUMAR-rq9pq
    @KRISHANKUMAR-rq9pq 4 года назад

    एक्सटेंशन बोर्ड में अगर mov jal हो गया है तो कैसे ठीक करें sir

  • @Mokiralabharath
    @Mokiralabharath 4 года назад

    I removed earth wire but remaining two plugs showing power.

  • @anishsinghx5584
    @anishsinghx5584 4 года назад

    Not good