I see Jolene doing a 'Spin-Off' RUclips series with Nate. Nate and Jolene are very talented individuals, and they're both young and have a bright future in the RUclips Hot Rod Builder's series's.
Productive days ... great juggling multiple cars and hustling guys!! And jolene kicking out the production ... I appreciate the mom n pop shop vibe yall have and doing your thing!! Kudos
Yes, Chad can't even come close, only his button welds which he jacks them up, if I was him I be ashamed that he has no master to anything not even his b.s.ing
Since you moved your front spring perch’s in from the original position, your springs are now to long. Look at your shackles, they are completely collapsed. Hope this is helpful. Yes add fish plates to your chassis for extra strength
I love the fabrication on the spot no nonsense we can build it or weld it attitude from hell 😁....you have two very talented men there Jolene love the channel you guys rock....🔥🔥🔥❤️👍🏽💯
Also when setting up straight front axle with center spring mount and split wishbones try to get 7° to 8° positive caster and 1/8" toe in to help eliminate " Death Wobble " !
No he's been doing it along time.withput him.. he's a fabricator and has always had someone help with the mechanical side.. he wouldn't be lost.. did some bad ass builds before the guy came on... and he will continue after...
Nate is the only person saving him on these last few builds and Chad can’t do anything by himself look he keeps asking the camera girl what do you think how does that look like he wants her to agree 😂😂
Totally wrong way to mount steering box ! Should have clamped mount to frame , mark holes and drill thru frame then weld mount to frame a lot stronger , no gaps between mount and frame ! That frame should have been boxed in where mount goes first ! Steering and brakes are the most important on any build ! You could die !
There is a right way and a wrong way to do something ! If chad sold that car to someone and they had an accident because the steering failed , Chad could be sued ! 🤔
Nothing this lamer builds would pass NHRA TECH INSPECTION, look at this frame , all patch work cobbled together by some Lamer who can’t weld , always bumping the welder trigger because he is a lame flake !!
@Jolene Just as Chad has an assortment of bolts, he could have an assortment of local hardware items. Especially since he's always working on cars. Just a thought.
I see some comments about how Chad isn't this or that but he succeeds because he focuses on the positive and doesn't waste time being negative, if we all propped people up instead of tearing them down this world would be a lot more tolerable.
Love the videos as always, refuse to miss one….. But the steering box is installed incorrectly and you’re going to most likely experience steering bind at some point . The pitman arm off bottom of steering box should be as horizontal as possible with the ground.
Interesting…. Nate doesn’t keep bumping the start trigger on the welder, because he knows what he’s doing , quite unlike Cassie , or Barbie , or whatever that lamer does, Nate is a good hand , although bad Cathy still questions him !!
I like the name I call him cheap Chad bad work he’s not a welder he is just lucky that he fell into this has no skills at all I know if you don’t like it don’t watch or you don’t have a channel
If you want to see Perfection. watch Mike @ Bellos Kustoms. The guy is a Master!!! If you know what Im trying to say, Lets Face it, to be Honest with you. lol Look at that now woould ya!
That flex exhaust pipe looks cheap and no good. It would be easy to buy a pipe bender and make a proper exhaust. And make to 3 pipes go into 1 . And poke the end of it out between the doors and the wheels. IT WOULD LOOK BETTER WORK BETTER AND BE CHEAPER !!!
I have never left you a negative comment in my two years of watching you everyday 9:13 but next time your welding near a trashed tire like that get a fire extinguisher close by that's a beautiful building you work in. I'm just saying. Keep up the good work but keep the fire damage down to a minimum that tire could go up in second and would be the perfect storm to remove that wood building in no time. Buy some fire extin guishers for your protection.
💥💥🍻🍔🐿️🛠️ somebody must be deef you mount your steering box the way you want to mount it and they will Mount their steering box the way they want to mount it. boy must be all track no train he can't follow instructions💥💥🙈
Hi everyone hope you had a great day. Nathan you and Chad are going to hear different ways on how to put the steering box on but I say do it your way for you are the only ones who has to be satisfied with what you are doing. God bless and have a blessed night
Joelene slow him down theres a buzz about his buzz you guys are losing viewers he's hard to watch.like that plus he never shuts up sorry dear I'm just saying what I've heard and seen
Dave all the Chad lovers are coming for you but I hope they all go I just watch for the comments and stupidity his voice is annoying and he walks like a monkey 😂😂😂😂 I know well then don’t watch ok
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
If the stering box goes bad your going to have to pull the engine to change it out.
Good old school ingenuity. Reminds me of my younger years and building hot rods. Enjoying your videos Jolene. Short and to the point!
I see Jolene doing a 'Spin-Off' RUclips series with Nate. Nate and Jolene are very talented individuals, and they're both young and have a bright future in the RUclips Hot Rod Builder's series's.
With this talent in the house, it’s a good day,,Fina you need to lay low till this heat wave has passed
Productive days ... great juggling multiple cars and hustling guys!! And jolene kicking out the production ... I appreciate the mom n pop shop vibe yall have and doing your thing!! Kudos
Pure surrealism ! Love it ! Excellent videography
Nate is the only welder in the shop who can run a bead. It's nice to see that.
Yes, Chad can't even come close, only his button welds which he jacks them up, if I was him I be ashamed that he has no master to anything not even his b.s.ing
I have seen him run a bead on heavier stuff.
Who runs beads on 80 year old sheet metal??? Come on! 😉✌
I agree with that he seam to be a welder I think he in the back of his mind that Chad’s a bad builder
Yes I noticed that too
Chad inspecting Nate’s welding. 😂
I'm with you Nate weld it solid around the steering box. Nothing worse than you steering box falling out when you're driving down the road.
Thanks for the bonus episode, it's nice to see the continuation of the work 😎👍
Since you moved your front spring perch’s in from the original position, your springs are now to long. Look at your shackles, they are completely collapsed. Hope this is helpful. Yes add fish plates to your chassis for extra strength
Great work guys!!
Chad is a lucky man to have such a phenomenal team. All 4 make for a tremendous business
Boy, that Nate sure gets wound up. I thought Chad was a fast worker but Nate can really get rollin.
Yes Nate works fast but he don't make mistake after mistake like Chad does that he is one step forward 2 step back!
Great job good team work
Definitely a high speed rated tire right there
I loved there reactions when Chad came in with the other street drive.
Looking good!
Nice job Chad and Nate.
Nice problem solving way to stick with it guys
I don’t think there’s anything that Chad and Nate can’t figure out their inspirational
When they do wake up someone and tell them...
I love the fabrication on the spot no nonsense we can build it or weld it attitude from hell 😁....you have two very talented men there Jolene love the channel you guys rock....🔥🔥🔥❤️👍🏽💯
Also when setting up straight front axle with center spring mount and split wishbones try to get 7° to 8° positive caster and 1/8" toe in to help eliminate " Death Wobble " !
How do you replace box once the engine is in
Should have weld nuts on the back of plate or tapped thread in plate
Watch out for those Irish pennants on that tire lol
Another amazing show
This will be a good job done ✔ Go for it Team Hiltz 👁 🐅 👌
Nate is the bomb.
TRIBALL SLOTS 18 Thanks!
I ran a perfect bead once, I always remember. Got so excited i forgot how to weld
🔥🔥🔥STEARING DILEMMA ❤🫡🔥🔥🔥
Hi Jolene, we would love to hear the story of how Bad Chad knows Doug and Nate and how they came to work for you two.
Looks like he's welding up the titanic
Good content Jolene
DA BOX STATE COLORADO 719. YA,NATES BAD ASS GARAGE. JOLENE WAT U THINK.
Chad would be lost without Nate
No he's been doing it along time.withput him.. he's a fabricator and has always had someone help with the mechanical side.. he wouldn't be lost.. did some bad ass builds before the guy came on... and he will continue after...
Nate is the only person saving him on these last few builds and Chad can’t do anything by himself look he keeps asking the camera girl what do you think how does that look like he wants her to agree 😂😂
What would MR Magoo do 🤡🚙
Keep it simple.
Good job Nate !
That mount won't ever fail it's not under that kind of stress.
Nothing like working on a flathead V8.
Totally wrong way to mount steering box ! Should have clamped mount to frame , mark holes and drill thru frame then weld mount to frame a lot stronger , no gaps between mount and frame ! That frame should have been boxed in where mount goes first ! Steering and brakes are the most important on any build ! You could die !
Only going max 60mph 1/8 mile drags. Calm down with the die shit killer! 😉✌
There is a right way and a wrong way to do something ! If chad sold that car to someone and they had an accident because the steering failed , Chad could be sued ! 🤔
Nothing this lamer builds would pass NHRA TECH INSPECTION, look at this frame , all patch work cobbled together by some Lamer who can’t weld , always bumping the welder trigger because he is a lame flake !!
Bad Chad , what a joke , bad crybaby lamer !!
I agree with you, but these cars aren’t even driven, just rolled into a building and parked to collect dust !
Awesome, Thanks
Holy crap Nate! Ya think you got enough Weldon that?
Did you get the forklift running?
Chad's afraid to drive it
A long time ago it’s on there play list
WIZARD!
I reckon if you trim the fuzz off that tyre you will get another 10,000 miles out of it.
Fish plate ???, do they mean Flitch plate ??.
Nice 👍
Lets see how this goes.
If those mounting bolts don't go through that mounting plate, and are just welded on, that is very dangerous.
@Jolene Just as Chad has an assortment of bolts, he could have an assortment of local hardware items. Especially since he's always working on cars. Just a thought.
I see some comments about how Chad isn't this or that but he succeeds because he focuses on the positive and doesn't waste time being negative, if we all propped people up instead of tearing them down this world would be a lot more tolerable.
I would incorporate quarter window into one piece suicide door. It would make roof look chopped and it is something I know of no one doing,
Jolene, we know you try dear but when someone gets in your face....... Cheers, Bernie
it could be hot lol too good laters
its simple to them logic and math and vision create just create.
Hi all from Trois-Rivieres Quebec
Nice
Another thing to mark off
Hello from Wyo
Waiting ✋️ All ✌️
Love the videos as always, refuse to miss one…..
But the steering box is installed incorrectly and you’re going to most likely experience steering bind at some point .
The pitman arm off bottom of steering box should be as horizontal as possible with the ground.
✌
FINA!!!
👍
Is Chad scratching his nails on the black board? Yikes
Redheadchicksfromcanadaarethebest🎉🎉🎉🎉🎉🎉🎉
Interesting…. Nate doesn’t keep bumping the start trigger on the welder, because he knows what he’s doing , quite unlike Cassie , or Barbie , or whatever that lamer does, Nate is a good hand , although bad Cathy still questions him !!
I like the name I call him cheap Chad bad work he’s not a welder he is just lucky that he fell into this has no skills at all I know if you don’t like it don’t watch or you don’t have a channel
And that motor is in there.all wrongsits too high
He don't care , it does need to come down 4 to 5 inches .
Nate is the 'GOAT' hands down, and Bad Chad is just bad/terrible.......
Nate wanted to put a plate on it but Chad is a terrible builder he has no skills Al he says is good enough
If you want to see Perfection. watch Mike @ Bellos Kustoms. The guy is a Master!!! If you know what Im trying to say, Lets Face it, to be Honest with you. lol Look at that now woould ya!
That flex exhaust pipe looks cheap and no good. It would be easy to buy a pipe bender and make a proper exhaust. And make to 3 pipes go into 1 . And poke the end of it out between the doors and the wheels. IT WOULD LOOK BETTER WORK BETTER AND BE CHEAPER !!!
Its funny how some comments are so nasty .pure hatred and yet they keep watching.???
To see the "counter comments" p0st by fools likecyou...
I miss Fina
like 63 !
I have never left you a negative comment in my two years of watching you everyday 9:13 but next time your welding near a trashed tire like that get a fire extinguisher close by that's a beautiful building you work in. I'm just saying. Keep up the good work but keep the fire damage down to a minimum that tire could go up in second and would be the perfect storm to remove that wood building in no time. Buy some fire extin guishers for your protection.
Hey Ken let’s see some of your builds I’ll bet you got some nice rides
💥💥🍻🍔🐿️🛠️ somebody must be deef you mount your steering box the way you want to mount it and they will Mount their steering box the way they want to mount it. boy must be all track no train he can't follow instructions💥💥🙈
Five more mins
Wednesday
whats Chad the water boy
Why would Chad leave the brake he just bought outside? Probably because he'll never use it
So he can sandblast it and paint it like new. Thanks for your concern tho it means a lot to him. 😘✌
Have to just laugh at the pathetic comments against Chad because if I don't laugh ill get quite aggravated, they are so not true
Sketchy
Hi everyone hope you had a great day. Nathan you and Chad are going to hear different ways on how to put the steering box on but I say do it your way for you are the only ones who has to be satisfied with what you are doing. God bless and have a blessed night
Bonus video of no minds wasting time ....
Joelene slow him down theres a buzz about his buzz you guys are losing viewers he's hard to watch.like that plus he never shuts up sorry dear I'm just saying what I've heard and seen
If that were the case they would know... how do you know there numbers lol
Jealous much? Obviously! 😉✌
Dave all the Chad lovers are coming for you but I hope they all go I just watch for the comments and stupidity his voice is annoying and he walks like a monkey 😂😂😂😂 I know well then don’t watch ok
Kind of an insult that you gotta check his work!!!
Why do you nockers watch it ??????😢