Guitar DIY: Types of Lead Wire
HTML-код
- Опубликовано: 26 июл 2021
- Lesson 5 we talk about the types of lead wire that you'll come across when installing your new pickups. Every pickup is different so be sure to look up your specs
We at Seymour Duncan want everyone to feel comfortable with a solder and empower our community to make some modifications, as well as DIY repairs to your own guitar. So join us on our journey and the first of many videos we release on the art of soldering.
Seymour Duncan's Pickup Installation 101: www.seymourduncan.com/resourc...
#SeymourDuncan #HowToSolder #SolderGuitarPickups
Follow Seymour Duncan online!
Website - www.seymourduncan.com
Facebook - / seymourduncanpickups
Instagram - / seymourduncanpickups
Twitter - / seymourduncan
ThankYou for your knowledge and expertise! Great quality video!
Thank you!!! I rewired my Bass to your specs and I got unbelievable
Thank you!
i have a fender player strat and as much as i love that single coil bridge pickup i wanna install a JB SH4 for that green day hot crunch lol aside from cutting the pickguard so it can fit, (i kinda wanna angle it like billie joe does) how would one do that
I ran into another kind of lead wire on Rickenbacker 4003. The lead wire was a 26 gauge (why so very thin and fragile?) wrapped in plastic with a wire mesh braid around that (for shielding I assume), and then braid was wrapped by plastic. The connection was made by cutting the plastic off the wire braid, twisting the braid together and soldering that twist to a pot (or whatever) and then the hot lead to wherever. In changing the pickguard and pickups on two occasions I found that the joint wherever the mesh twist was bent at 90º broke at all places with the manipulation of working on the electronics and replacing that and pickguard back into the guitar. Two wires, ground and hot would be more durable.
is it possible a vintage style single conductor wire...wired onto push/pull pots and how the connections?
I generally straighten a short length of braid, twist the strands together and tin that, ensuring that it doesn't unravel
Would connecting the white and red apply to stacked single coils as well?
I have been looking for the answer this question. I am sure I will find it sooner or later. Each coil has a black and white wirer but I have not heard mentioned which coil has the red or white wire. I realize that it dose not matter. Black & white. Red & Green? If I had to guess. Thanks SD 👍
Im using shrinktube where I can. only place I need to solder will be back of volume pot for grounds.
I don't see 1-conductor pick-ups available in Europe, only 2- and 4- conductor. Is that because the 1-conductor is an older method of connecting components?
Is that color code the same with epiphone lespaul humbuckers.
So the red & wht wires are connected together then shrink tubed ... Right
I'm trying to wire a p90 humbucker p90 configuration guitar with a 3 way switch.
All brands use the same distribution with the 5 wires? I mean if each color always corresponds to the same pin.
results!!!
I recently ordered a duncan jazz and jb pickup set, the sh-4 has 5 leads the sh-2n only has 4 leads no bare wire... did I get a fake duncan or is it suppose to only have 4 leads on the sh-2n?
isnt red usually the hot?
Cannot remember how I first installed my Slash zebra pickups, flicked from bridge to neck pick and no sound that’s why I’m watching video.
I’m not that bright with these things.. I bought a pick up from eBay that has a green and a white wire but when I took my broken pick up off guitar it has a red wire,a white wire and a bare wire~ all three encased in a black plastic covering ..