Hi @Riteshpatel7283 ! The discharge line temperature has exceeded its temperature limits too many times and has thus locked the unit out. You will need to go to Copeland Mobile and look up Application Engineering Bulletin # AE8-1376.
Buenas noches, alguien me podría pasar el manual de ese controlador xc10cx ver. 7.3 o indicarme como lo descargarlo ... lo es intentado pero me sale otro xc10cx - xc30cx. los parámetros no son los mismos. gracias saludos desde Bogotá - Colombia
The closest alarm we can find is "HPL" - Copeland has said the following - System operation causing high discharge pressures (HPL) or high discharge line temperatures (DLL) repeatedly - check system operations. To clear an HPL or DLL lockout, hold the start button for 3 seconds 2 consecutive times, or cycle power to the unit. If using the reset button, the alarm condition will have to clear (DLT temperature drops or Hp switch resets) and any minimum off time will need to complete (5 minutes for the fixed Hp switch). (HPL) high discharge pressures lock alarm is displayed if 5 repeatedly HP alarms occur within 1 hour. We hope this helps!
@@KennethMedard-cj5dp Depending on your model number it may be. Abnormal voltage rise or drop. Possible causes; power supply issues/ faulty reactor / faulty PCB
Can I adjust the HP limit
Can you tell me why this dLL sign keep coming even this is Brand new unit but the fan is from old Unit
Hi @Riteshpatel7283 ! The discharge line temperature has exceeded its temperature limits too many times and has thus locked the unit out. You will need to go to Copeland Mobile and look up Application Engineering Bulletin # AE8-1376.
I replaced the controller after that p2 and p3 appear .why ? I have to changed the low and high pressure sensor?
Thanks
What does alarm code p3 mean 😭
EMERSON DİXELL KADAR DEVAM EDİYOR OLARAK KABUL
Buenas noches, alguien me podría pasar el manual de ese controlador xc10cx ver. 7.3 o indicarme como lo descargarlo ... lo es intentado pero me sale otro xc10cx - xc30cx. los parámetros no son los mismos. gracias saludos desde Bogotá - Colombia
Saludos, Señor Oscar Moreno:
Para poder ayudarlo, por favor envíeme su correo electrónico a --- marketing@tropicsupply.com.
¡Muchas gracias!
Hello, can someone explain to me what is PL alarm od Emerson compressor? Tnx
The closest alarm we can find is "HPL" - Copeland has said the following - System operation causing high discharge pressures (HPL) or high discharge line temperatures (DLL) repeatedly - check system operations. To clear an HPL or DLL lockout, hold the start button for 3 seconds 2 consecutive times, or cycle power to the unit. If using the reset button, the alarm condition will have to clear (DLT temperature drops or Hp switch resets) and any minimum off time will need to complete (5 minutes for the fixed Hp switch). (HPL) high discharge pressures lock alarm is displayed if 5 repeatedly HP alarms occur within 1 hour. We hope this helps!
@@TropicSupplythanks for help
What is a p1 alarm
5:15
@@KennethMedard-cj5dp Depending on your model number it may be. Abnormal voltage rise or drop. Possible causes; power supply issues/ faulty reactor / faulty PCB
No use at all