1950 Fender Super Amp: Naked and Thrashed but still SUPER !!
HTML-код
- Опубликовано: 27 июн 2021
- This video features the repair of a heavily used, but rare and wonderful 1950 Fender Super Amp.....favorite of Billy G. Although it had already been recapped, the tone was awful, the output transformer was flapping in the breeze, and the wiring looked like linguini after a hurricane ;) Through careful replacement of key capacitors, the tone was restored, the wiring replaced (as needed), and the OPT repaired. With the help of Ollie & Jack, we will audio test the final result, as well as open a splendid box o' tubes from Sweden, and share some valuable basic concepts. The icing on the cake, however, will be the final, very special video that has never been shared with viewers, featuring my late, beloved workshop partner and pal.
If you enjoy advertising-free videos like this one, please SUBSCRIBE to our channel and consider becoming a Patreon patron at: / uncledougsvintageamps or making a PayPal contribution to dldcam@aol.com. Thanks so much for watching :) 
Видеоклипы
Congratulations on surpassing 100,000 Uncle Doug! You dont need a plaque to know you have our love and respect!
Thanks so much, TC.
“Does it hum or does it know the words”. Well done sir.
Glad you enjoyed it, BB :)
@@UncleDoug Seeing Rusty again choked me up. By far the best part.
The tone is now heavenly, so chimney! The opposite of dull, wow.
Glad you like it, Dj.
He’s enjoyed the ball playing with you for many years…You will be rewarded for taking care of your faithful companion!!
Thanks, JC. His company was reward enough :)
It brought a tear to my eye to see the old shop assistant in a video again. I can only hope to someday be throwing the ball for Rusty and all of the other good boys and good girls in heaven.
That was his last video, Matt. It took quite a few years before I could share it. Thanks !!
It’s not heaven if the furry friends are not there.
An awesome video as always! Thanks Doug!
@@UncleDoug I feel you.
@@Curtislow2 Thanks, Curtis.
@@hallanvaara6106 Amen, Hal.
The best channel ever and what a shame that you dont get recognition for your dedication to your viewers from youtube. We all appreciate your knowledge, teaching, and help through your videos. I think I speak for all of us that we are always on the look out for your new videos and when we see them it just makes our day that much better. Thank you Uncle Doug.
Wow.....thanks so much, Kevin. To be honest, nice comments like yours are far better than any plastic plaque.
You’re doing the world a service, sir! Thank you. These videos are so important for the vintage amp enthusiast. Not only restoration, but documentation. Thank you!
You're quite welcome, Ryan. Thanks !!
R.I.P. Rusty forever missed
Indeed, CL. Thanks.
Sweet to see Rusty again👍..
@@UncleDoug man I’m sorry to hear that
@@matthewmuziani1961 Thanks, Matt.
So sad when they go away ...
"The grill cloth looks like a place mat from a Chinese restaurant".... lol Uncle Doug Classic.
It really does :)
@@UncleDoug Maybe worth getting a couple and fitting to another home brew for the fun of it. (though most are a woven thin bamboo ?)
@@highpath4776 I'll steal the placemat the next time I order Bat Soup ;)
This is one episode that deserves rewatch - at least once a day. Definite Top 10 RUclips Video of all time right here!
Wow....thanks so much, Sean :)
@@UncleDoug I just took possession of what I think is a 1940's amplifier and I can't find any info on it. Any help on identifying it would be greatly appreciated
@@bernierutledge7599 My batting average is not too good when it comes to identifying unmarked amps from photos, Bernie. Your best bet is to do lots of internet searches to find photos of a similar or identical amp. Good luck.
@@UncleDoug I've searched high and low . Can't find anything.What I can tell you is it's a Western Electric R4048A amplifier. Its in a suitcase style case with a removable back to access the input jack.
thx
@@bernierutledge7599 I wonder if it could have been for public address, phonograph, or possibly for use with a projector,
Protect this man at all costs. An absolute American Treasure. Thank you Uncle Doug. Keep those videos coming!
You are too kind, Doc. Thanks !!
My goodness, that amp is ready for the studio now. Those humbs. sounded amazing and the singles were angelic. Good work Mr. Doug!
Glad you enjoyed it, Z1 :)
That is an archeological find and a beautiful old amp. I have never seen one like that and my first thought when looking at the front was that a previous owner bolted a piece of body molding from a Pontiac Chieftain to the grille.
Very sorry YT would not send you a plaque for your major accomplishment. I suppose twerking channels with ads and 47 million subs have more value in the corporate world (please don't twerk!) than an excellently produced vintage amplifier channel, but you have 100,000+ loyal subscribers who would strongly disagree. I'm sure I'm not alone when I say that every minute of every video on your channel is greatly appreciated.
@Slugg0matic Agreed whole-heartedly, S. To you, Uncle D and his beloved four-legged colleagues: All the best. R 🍻😎
👴🏻👍🏻 Get to twerking Uncle Doug.
Thanks so much, Randy. The trim piece does look like it fell off an old car.....or it's part of a bathroom fixture :) To be honest, a bare wall is a small price to pay to avoid the infliction of boring, redundant commercials on you all.
@@UncleDoug Thank you for not having ads, very much appreciated!!!!!
Yes!! We DO appreciate Uncle Doug.
i love the new intro and logo thing you did! now you gotta slap that logo on a shirt or sticker!
Good idea, Joe. Thanks !! The intro and design were created by a viewer in Poland.
@@UncleDoug Just tuning in........great idea about t-shirts.....you should start selling them......you have a great following and should sell quite a few !.........now back to the video ;-))
I'd definitely be in for a few shirts!
I’d definitely buy a T-shirt with that logo! Greetings from Finland 😊 It’s always a pleasure to watch your videos and learn new things. Thank you!
I need an Uncle Doug tshirt!
Congratulations on the 100k Doug !!!
Thanks, Bert :)
Great work on a very old amp! Congratulations on surpassing 100K subscribers!
Thanks twice, Dale.
Wow, the production is getting snazzier! Thank you for sharing your knowledge and expertise with everyone. Much appreciated!
It's our pleasure, NO. Thanks !!
Bless you Uncle Doug for sharing your wisdom with us.
God Bless and Protect you and your Family!!!
We love all you do for us Uncle Doug.
We Love and miss you Rusty. So many good times, memories and laughs:)
Thank Uncle Doug for some Rusty time again:) Warms and fills my heart with love!!!
Thanks so much for your very kind words, F1. Likewise on the blessings :)
Gem of a channel. Really. Learning so much and having fun while doing so. Thank you for your time and effort into putting these together.
Uncle Doug... First of all, I want to offer my condolences to you for the loss of your "part-time" ball fetching team mate, Rusty. For us who have been following you all this time, he will never be forgotten... especially with his "not in a hurry" way of entertaining. I am certain that it's safe to say that for most of us, you and the fir kid s are like family. You could post a video that was completely non-amp repair and we'd watch it in it's entirety.. just because you're Uncle Doug. Congrats on having 102k people who appreciate you. Brian
Thanks so much for your very nice comments, Brian. I thought it fitting to feature Rusty in his last video to celebrate our exceeding the 100K subscriber goal. I credit him with much of our channel's success :)
It brings a tear to my eyes.
Me too, Willem. Thanks.
Rat Nectar: no doubt will be a high school metal band sometime soon - fantastic video... congrats on 100K evidence that sometimes the good guys win.
Thanks so much, PJ :)
Awww....you beat me to it! Rat Nectar forever!🤘🤘
I love these videos coming from a guy who loves old amps and old hot rods... Thanks.
That's me for sure, Rick. We're glad to hear it :)
This channel is one of the best thanks uncle Doug for countless hours
I still watch the nine comparison amps over and over love those old tones
It's a pleasure, QL, especially when we hear from great viewers like you.
Seeing the logo it is definitely time for uncle d merchandise 👍 Again a wonderful work has been done on a great piece of vintage gear. Thanks for sharing this with us
Thanks, Doc. It was a pleasure to do so :)
Great to see the clip of Rusty. May hunt well in his happy hunting grounds. Not to mention the resurrection of the 1950 Fender Super Amp, would be criminal. And of course congratulations on the 102K subs.
To Rusty: Love and Woofs always. Stay free. (Uncle) Rab. (🍻) 😎
Thanks so much, Curtis and Rab.
The RUclips algorithm showed me this video, as a small engine mechanic and a hobby guitar player, this was a perfect fit, subbed for sure! Now binge watching all your videos 👀
That's great news, JM. We're glad you found us and hope you enjoy all our videos.
@@UncleDoug personal and professional! Not sure if this is covered but where did you pick up amp restoration / how did you get into it?
Nice intro, Unc! Congrats on 100K! Thank you for allowing us to ride along with you.
Thanks so much, Abe.....and thanks for joining us :)
"destroys the neighborhood in a smoldering ball of rat urine". Nicely said.
'rat nectar' please...
It's a stench that almost defies description.....sort of like being downwind from a crematorium on 2 for 1 day ;)
@@UncleDoug My grandfather lived down wind (especially in Summer) from an old Rendering Plant (as he & parents called it) I came to understand where all the dead animal carcasses ended up.
Ever wonder why it’s so hard to find a 0.00001mF cap? Smaller values like that were just starting to be called picofarad (and nanofarad to replace sub 1mF or mmF)in the military/science and test equipment sector of the 50’s. For some reason, humans have a horrible time with decimal places and a succession of repeating numbers. I know I do.
So, for all of us that aren’t masters of tube equipment like Uncle Doug, it’s a 100pF cap.
I have an almost new set of ST envelope RCA 6L6G’s I would have donated to this cause. I think I’ll have to ship them your way.
Thanks for the helpful info, Matt. I prefer to verbalize the units on the cap or schematic.....just to avoid confusion, and I could definitely use a nice pair of 6L6's if they're burning a hole in your pocket ;)
Chasing decimal points around capacitors is a lot like playing wack-a-mole and makes my brain hurt.
The disappointment upon seeing all the swapped parts I could feel through the camera… Amazing work as always!
I love seeing how these original tube amps ticked. I always learn something new when I catch a new video :)
I just fixed an ampeg svt II non-pro and without your videos I can honestly say I’d have been hopeless. Ty so much for what you do, I’ll throw a milkbone in the fire pit for Rusty tonight, ty for the ending
Thanks so much, QS. We're glad the videos are helpful.
Hi Uncle Doug. I'm going through all of your previous videos, which I watched when you posted them. I'd like you to know, and this ain't BS, the huge impact you've had on my life. I had to start working on my own eqip. years ago, as I live in the boondocks of upstate NY where there were only a handful of radio and TV guys who didn't know much about guitar amps. The worst thing was, my amps are a 1966 F. Vibrolux Rev. and a 67 pro reverb.I didn't have a clue, but I had no choice. I had to dive into the fray if I wanted to use them. I did know enough to realize these were quality amps that I needed to keep. I tinkered a bit but was afraid I would mess them, or myself up. When I discovered your channel you inspired me to learn. Now I feel comfortable working on my own, as well as other people's amps. I charge very little if anything for doing it but in any case, you were the one who got me to this point through your unselfish love of sharing your knowledge. Thank you.
Wow.....Thanks for the wonderful comments, Tim. Nothing makes us happier than hearing that our videos have been helpful and inspirational.
Did you end up removing those extra resistors by the volume pots you mentioned at 14:17?
I was wondering the same.
@@smasica me three
I failed to mention that I did jumper them and noticed no change in tone or volume......which makes you wonder why they were there. I left them....they appeared to be original.
@@UncleDoug poss to stop runaway with no resistance in the circuit
@@highpath4776 I honestly do see any good purpose for the resistors, HP. The current flow in the signal circuit is so low, however, that virtually no voltage drop occurs......which is good.
0llie can really play that guitar~
She's an old soul, Jay, having spent the first 5 or 6 years of her life fighting for survival in the wild.
@@UncleDoug 💚
I could hardly blink while looking at you saving this gem of an amp.
A miracle worker you are.
I'm obviously not a dog person but I can still appreciate how Rusty was darn charming, and I'll admit I've watched that bit twice.
Thanks so much, PMD. Rusty was indeed a charming rascal :)
I started out using old tube radio sets in 1955 then "real" tube amps around 1958, eight years after this jewel was made. Although I haven't taken
alcohol or any other "enhancer" for going on twenty-five years, I now find myself addicted to these wondrously
wise, humorous and loving videos. Well I'll be darned as you might say but a great big thank-you and be sure I'll
keep on consuming!
Amp addiction is definitely preferable to most other addictions, NM......although it's been know to consume savings and cause marital strife :)
I’d buy your logo on a tshirt!!
I may hold you to it, Cole :)
for sure. make some Tee but without the FB link plz.
All the best from Portugal, thanks for helping to educate me.
Happy to help, Sandi. Thanks !!
Thanks for promptly answering my question about speaker swapping while on standby sir....I shall sleep soundly this evening. Peace to you Uncle!!!
Glad to have been of service, Nick.
Congrats on 100k subscribers! I'm happy to be a tiny little part of it. I got in a few years ago and enjoy all the vids. I can't even describe how helpful you've been. You have played a massive part in my own adventure into amp building and repair. And I can't lie...I'm sure I'm not the only one that got a little lump in the throat at the very end there. RIP good boy.
Thanks so much for ally your vey nice comments, GL.
Uncle Doug,
Seven years ago in the dead of winter i lost my wife in childbirth. We weren’t very young but we were newlyweds and she gave me a daughter to raise alone. That was a hard pill to swallow. I will leave the difficulty of enduring that to your imagination but suffice it to say that one scratches and claws at whatever they can to bring them comfort in those times. You did that for me. Somewhere in the fog of that i stumbled across a death capacitor video and was intrigued. Watching your videos was a great distraction and educational. I like everything about your videos… the ultra dry humor, the detail, the education in laymen’s terms that is nit condescending. I won’t go on much longer with my sob story but I thank you for putting the time and effort into sharing your knowledge and frankly a part of your reality with us. Everybody fights a battle and it’s nice to be able to enjoy someone else’s view of the world, even if it’s watching your cats sniff other people’s soup whiff blanketed packing jobs. Thanks for the hard work and i look forward to your next amp project.
Andy
Wow, Andy, I am deeply moved by your story and very glad indeed that our videos were helpful during your time of need. We're here for you. Thanks !!
My God Andy, I can't imagine what you must have gone through during those trying times.
I realize I'm years late but after reading your comment to Doug I realized my struggle, in effect, wasn't quite so bad.
I was in a car accident 2 years ago from which I'm still trying to recover. Haven't worked since essentially. Never the less, helped me realize others have a much harder road to hoe than myself.
Here Uncle Doug and his shop stewards have taught a couple Middle ages men some very important life lessons!!!
All the while giving us some pretty entertaining videos to watch and teaching us all about tube amplifiers & electricity in general
Doug, I recently discovered this channel after purchasing my very first (modern) tube amp and after binge watching most of your videos I can now safely say I know more about tube amps than I did before. Your videos are an absolute delight and in a RUclips desert of mediocrity, your channel is truly an oasis. I take my hat off to you sir.
Wow......thanks so much, Sparkster. It's great to hear that the videos have been helpful.
102k and climbing - I am sure some of us could design a plaque. But we ARE the plaque. Uncle Doug is our internet meeting place for these very specific interests and I could not be prouder to be a part of it.
What a great way to describe our relationship, C8......and it's much more significant and rewarding than a stinking plaque.
Dear uncle Doug. This is such an amazing walk through, thank you so much. I’ve been fighting weird noises and thin sound coming out of my Super ever since it came back from the repair shop. Your hint about + to + on the speakers did the trick! They were wired wrong. Now it sounds E P I C. Thank you for going into the little details. They matter. Best regards
I'm glad the video was helpful, E. Polarity really matters when there are two or more speakers.
It's always a good day when Uncle Doug bestows us with a new vid. Love the intro and really digging the logo.
Thanks so much, Dan.
many thanks for the nice video and the reminder of Rusty. We all miss him.
You're quite welcome, M.
Congratulations in 100k! This one cleaned up pretty good, and sounds even better. The Rusty footage at the end surprised me, he certainly was part of the team. Thank you for sharing your knowledge but not the smell. :))
Thanks, Andrew. That was his last video......it took several years before I could share it.
nice repair Uncle Doug ,it really sounds nice now and balanced ,Congrats on going over 100,000 subscribers ,you definately deserve a standing ovation for all the hard work you put into making these videos over the years and entertaining us all
We appreciate your kind comments, Joe :)
It's great to see your extraordinary talents again Uncle Doug! Congratulations on surpassing the 100K milestone!!
Thanks twice, Rick :)
It’s just OUTSTANDING to see you salvage another early Fender “Super” from the scrap heap!! Well done Uncle Doug!!
Thanks, Luth :)
So Sorry Rusty is gone. It hurts to loose a loyal buddy like that. It certainly appears he led good and happy life.
Thanks so much, Doug. I sure hope so :)
I like it when you can see the woodwork. Those baffles makes it look even older. Very stylish.
I agree, Lennart. The fretwork is quite nice.
One of the best amp channels on RUclips, if not the Best! Thanks Uncle Doug.
Thanks so much, RF :)
I never forget the video when UD asked Rusty to help clean the shop... Rusty always disappeared after treats... So awesome
Rusty was indeed and elusive "helper" ;)
The recording quality of your amp demos has been getting better and better. This one sounded fantastic!
Thanks, Tim. I hope the stereo effect came through OK. I'm also improving the audio sampling rate and other editing parameters.
As usual, great Detective work. Everything makes so much sense the way you figure it out. Instead of mysterious electronics, everything becomes boards and nails.
Thanks for your kind words, CD :)
Uncle Doug, just want to say thanks for helping me to understand finally how these ancient devices work. I'm sure, in another 70 years, this amp will sound as good as it does now-IF we have any tubes left.
In the last couple of months I have done another apprenticeship with your vids, and I will have to go back--too much to take in in one go.
I have been playing for 40 years (56), and never really understood why some things just sound better, and now I think I do. Electricity is scary, so I chose to work with 9v insteadof 240v, and tried to get my Marshall fix with a Noisy cricket into a 4X12, and thanks to you, I now am starting to understand how it works.
These circuits were all made perfect back then, and you are making sure they still work.
Bravo.
You're welcome, Andy. It's great to hear that the videos are helpful and informative.
71 years. Wow. Amazing post delivery of tubes, that was cool. The brown sparkle cloth goes just fine with a 71 year old Fender. And the condition of the cabinet, minus tweed of course, just looks solid, looks great.
Thanks so much, Guillermo.
Hello Uncle Doug, Great to see another video restoring a vintage amp. You always do such impeccable work and attention to detail. Always a great learning experience. Glad your doing good and staying busy. The caps made all the difference, the highs were clear and bright, very nice. We had temps of 109 to 112 degrees on June 26th and 27th, back to cooler weather on Monday. I'm busy as ever and glad when I can catch up on RUclips. Thank you for all you do providing quality content and teaching. All the best from Oregon, C.
Greetings, Cass. Thanks for the very nice comments. It was around 104 to 108 here for the past 3 weeks, but 68 degrees and raining (around 4 to 5 inches) for the past 3 1/2 days. What a wonderful change :)
@@UncleDoug Are you in the Californian desert Uncle Doug? Just curious as I have lived in Joshua Tree for 12 years now and know the desert well... Seems to be getting hotter and hotter with every passing year out here :-/
Also, I have a plethora of vintage and almost antique tube amps that I have been collecting to (or attempting to) work on. A few of which I just put on the back burner until I gain some deeper knowledge...
Finally, you have been so helpful with what I have learned that I cannot thank you enough!
Caan
@@dreamsofeden Greetings, Caan. No, I'm in the Chihuahuan Desert, in far West Texas. I'm glad our videos have been helpful.
Man, that sounds good with buds. Ty, unkie Dougie. Well done. 👍
I'm glad you enjoyed it, Robby.
Rusty brought a tear to my eye. That beautiful dog had such a nice life with you.
Thanks, Chris. I sure hope so.
Great to see you're back. Great video. Three months ago, I woke up one day with severe sudden hearing loss in my right ear (minus 60 dB!). Big panic! Cortisone infiltrations through the ear drum did not bring my hearing back. Sadly, I have to live with unilateral hearing loss for the rest of my life. Restoring and repairing amps will be a bit more difficult now, but I guess my trusty scope will help me out.
Thanks. That's really unfortunate, Berre. Best wishes for a miraculous recovery.
Most (or all) of folk on this channel have an interest in sound production or similar. I assume you are amongst them, so the hearing in one ear will be sorely missed. Best wishes, I trust you will work around it.
Good job don't plan to own one but like watching the repairs and the sound they produce.
Thanks, Brian.
Thanks for letting me watch you work. Amazing
Love your helpers too
Thanks for joining us, BV.
Great class as always Teach! You gave that old amp a new lease on life. Loved the clip of Rusty qt the end. Congrats on 100k! You earned/deserve it!
Thanks for all your very nice comments. LL.
I must say UD I do miss Rusty in your video's...Thanks yet again for all of your time and effort to bring us these videos. It really is appreciated!! Have a great day!!
Thanks so much, Jack. You, too :)
Hi Uncle Doug! Great video as always. And congratulations on surpassing 100k milestone, what a journey! In the last month I finally managed to watch more than 2 years worth of videos. That was a lot to catch up and a lot of amazing gear to dive into. I think this wave of binge watching finally pushed me to slowly start working on my long overdue Champ-ish project. Cheers to You, the Sniffing Associates and to Rusty wherever he may roam :)
Thanks so much for all your great comments, N. It's always great to hear from you :)
Great Demo Doug using 2 Mics has all your hard work coming to life.
Glad yo enjoyed it, James.
Nice to see your old friend Rusty Doug.. been watching you for years now and always enjoyed his cameos..
This was his last video, Dom, and I thought he did a wonderful job.
Another great lesson and successful repair/restoration. I for one appreciate that you don't use the ads on your channel- I tried on my channel for a while but the "revenue" was so small it was a joke, so I stopped allowing it too.
Thanks, John. I personally hate ads and thus cannot, in good faith, inflict them on others, even for money.....or a plaque ;)
Always the highest respect for you Uncle Doug! im glad this amp is not being re-tweeded :) i will always stay watching your videos:)
Thanks so much, Jake. It would be like putting a moustache on the Mona Lisa ;)
Another excellent video. Sorry to hear of your loss. Hope you are well.
Thanks, Max.
Congratulations 🍾🎈 on your surpassing 100,000 subscribers. Another great informative video.
Thanks so much, E :)
congrats on the milestone! Your videos have been a great help.
Thanks. Glad to hear it, Cass.
Congrats on surpassing 100k and thanks for that vintage Rusty footage! Another great video, as always.
Thanks so much, Suomi.
Oh dear Doug, so sad but fun to see a clip of old Rusty...Missed but not forgotten...Wow what an amp Doug, and the in depth info and final fix. Just love to see your videos, and they are starting to make sense now. From one old codger to the next, keep up your great work mate..Ed..uk..😀
Thanks, Ed. Will do :)
Love your fine teaching and work.
Glad to hear it, Freddy :)
Thanks, Uncle Doug, for including the automotive engine analogies. You did a good "dyno test" of the amp!
Glad you enjoyed it, MR.
Congratulations on the 100k mark I noticed that right off the bat. Thanks for another great video.
Thanks, Phillip :) It was our pleasure.
I just went, begrudgingly, cleaning my rug. There came the excuse: A new video from Doug!
To heck with boring chores......grab a 5th of whiskey and a big cigar, and get comfortable ;)
@@UncleDoug I prefer tea myself, but that works just fine ;)
@@tinkerwithstuff Then tea it is :)
Always enjoy seeing the amps you get to work on.
Thanks. I been getting some really nice ones lately.
Always learn a great deal from your videos. Thanks
We're glad you enjoy them, Franklin.
The singularly most enlightning interesting and often amusing viewing
on this entire planet during this epoch, thankyou too uncle doug,
Thanks so much, William. High praise indeed :)
You are getting in some killer vintage Fender amplifiers!
Yes, indeed, and it's an honor to work on them.
Another great & educational video thanks Uncle Doug!!
It was a pleasure, Big Joe.
Wonderful troubleshooting work and associated explanation.
Thanks, Mark :)
Just rewatched this,video log great stuff I too am an old codger with two dogs two cats and a bird,and a wife thanks for the great content.mark
You're welcome, Mark.
First of all, congratulations on your 100,000+ subscribers! You are definitely one of the best RUclipsrs I subscribe to... ESPECIALLY because you don't sell out to commercialism. You just do your thing and VERY well. I know that Rusty is very proud of you, wherever he is.
Thanks so much, Wes.
Awesome amp, and congrats on 100k subs! Thanks as always Doug.
Our pleasure, Scott.
thank's for the tip about finding the polarity of speaker's with a 9v battery Doug, and congratulation's on the 101k sub's, you deserve every one,
Glad it was helpful, Paul. Thanks !!
Congrats on the well deserved 100k, Uncle Doug! Good to see Rusty again.
Thanks, Andy :)
It's nice to see Rusty is back in your video. It brings back memories of your earlier videos when Rusty was almost as prominent as the amplifier you were featuring. I'm sure he was a great family friend and you miss him dearly.
Thanks so much, LC. Yes, indeed.
This is an amp that I have wanted to build for a while. I have only built the obligatory 5e3 amp in the past (successfully FWIW). Still watching your video but in my prior research, this looks like it is the 5B4 circuit layout with 3 higher MFD caps (20 MFD) as opposed to the 4 16 MFD caps in thge 5C4 and 5C5 layouts. Back to watching.. :)
Thanks so much for yet another great video. You always deliver
You're welcome, OG. You may well be correct about the circuit ID.
Good to see you, and nice to see a short of Rusty at the end. Your old boy and mine left about the same time.
They will definitely be missed, NDL. Thanks.
Another wonderful vid Uncle Doug. I find myself saving them back sometimes such as tonight (Friday here) a few beers and a small Islay malt whiskey and of course my own guitars just for company and a little blues play along. Keep em comin.
Thanks so much, BN. Will do :)
That tip about fabric creases reminded of my Mother ironing, she would mist or as she said sprinkling the fabric before applying the hot iron.
A little moisture will make the fabric relax, GS. Your mom was right.
How did I miss this little gem! Love the intro. Lookout, Friends theme song!
Glad you enjoyed it, LV.
Hi Uncle Doug I'm new to your channel and I just wanted to say you did a outstanding job on explaining what certain things are supposed to do and as a musician I can really appreciate that....and I also say that I'm pretty picky on watching certain things here on RUclips because some peep's just don't show much or they talk forever about nothing that has to do with anything their working on....so I just wanted to say you got to the point of what your mission was to do on making this amp. work properly....I'm glad that I found your channel...."Nunca pare la Musica"
Thanks so much, Smiley. We're glad you found our videos to be concise and informative. We're glad you found us too :)
I can't ever look at green bubble wrap without seeing in my minds' eye a very old Dr Who episode where a giant space maggot was nothing more than a man wrapped in green bubble wrap and crawling along the spaceship floor. Gotta love those types of B-grade special effects!
I recall that the "special" effects in Dr. Who were generally anything but special ;)
Congratulations on the 100,000 !
Thanks, Dean.