Mx5 Miata 1.8 NB 99 Supercharger M45 build, closer look and sound

Поделиться
HTML-код
  • Опубликовано: 11 янв 2025

Комментарии • 67

  • @BoostedNDMiata
    @BoostedNDMiata 3 года назад +8

    Functional art. That’s just a thing of beauty.

  • @cre8tivegarage157
    @cre8tivegarage157 4 года назад +5

    Sounds amazing and the set up is just clean 🔥🔥 congratulations

  • @marcellopasini
    @marcellopasini 2 года назад +4

    I have the same sound in my engine!!! but in my case is just a bad bearing!! lol.. great engine and great sound!!

  • @blundy1
    @blundy1 10 месяцев назад +1

    Beautiful car.

  • @charlespletzke8311
    @charlespletzke8311 4 года назад +4

    Very nice 1.6 cam cover

    • @miatahelix
      @miatahelix  4 года назад +1

      why 1.6 ?

    • @charlespletzke8311
      @charlespletzke8311 4 года назад +1

      @@miatahelix unless the NB cars were different, the 1.8 cam covers had the words embossed, whereas they were engraved on the 1.6 covers

    • @miatahelix
      @miatahelix  4 года назад +2

      @@charlespletzke8311 yes maybe NB are different.

  • @ericseven711
    @ericseven711 4 года назад +7

    how hard was it to install? lots of adjustments/fittings ?
    Would you recommand this Bofi racing SC kit ?

    • @miatahelix
      @miatahelix  4 года назад +11

      Very nice kit easy to install if you have some basic knownlage. Ask them to send you installation instractions will be help.

    • @ericseven711
      @ericseven711 4 года назад +2

      @@miatahelix thank you very much ! Now I'm determined, this is the Kit I need.

  • @WorstPaperCut
    @WorstPaperCut 4 года назад +3

    hows the reliability? I live in the united states, the most popular kit is called track dog racing and people who own the kit say it's super reliable and they drive the car super hard still.

    • @miatahelix
      @miatahelix  4 года назад +1

      I use my mx5 80% for track days. If the m45 recondition well will be no problem and reliable .

    • @WorstPaperCut
      @WorstPaperCut 4 года назад

      @@miatahelix one more question. Do you still have all the parts from bofi racing installed or did you swap out some parts. Its because I am thinking of getting the kit and rather just downland a tune from someone else who has the exact same setup. save $500 dyno tune.

    • @miatahelix
      @miatahelix  4 года назад +1

      @@WorstPaperCut everything you need includet in the kit. But always you will need more parts when you boost your car. After add bofi racing kit i have to change radietor to a biger one. Olso water rerout kit. Smaller pullay for little more boost. And finaly new clutch. Also add water oil and boost gatdets to monitor your engine.

    • @WorstPaperCut
      @WorstPaperCut 4 года назад

      @@miatahelix did you ever get a dyno on the car? I read on some miata pages that M45 hp out is like 160 WHP. you stated that the car makes 190WHP on virtual dyno. Unless you did a smaller supercharger pulley.

    • @miatahelix
      @miatahelix  4 года назад

      @@WorstPaperCut not dyno yet. Yes i have smaller pulay. 0.5 bar boost.

  • @javiervalencia8458
    @javiervalencia8458 4 года назад +4

    Do you have to run two throttle or just one? I see others run this s/c and they have 2

    • @miatahelix
      @miatahelix  4 года назад +3

      Just one. I don't like extra moving parts.

    • @javiervalencia8458
      @javiervalencia8458 4 года назад

      How is the response?

    • @miatahelix
      @miatahelix  4 года назад

      @@javiervalencia8458 immediate response

    • @awesomecooly123
      @awesomecooly123 4 года назад +1

      @@miatahelix blow off valve to prevent couplers popping off right? Is there anything else to this setup? I currently have the original crossover tube and TB pre charger. And was wondering what it would take for me to put TB at intake manifold and put in intercooler.

  • @Eggiot97
    @Eggiot97 6 месяцев назад

    do you know the size of the silicone and metal hoses you've used on the supercharger intake?

    • @miatahelix
      @miatahelix  6 месяцев назад

      No i never checked, it was in the bofi racing kit.

  • @eigusteeen
    @eigusteeen 4 года назад +2

    Did you remove the heater radiador?

    • @miatahelix
      @miatahelix  4 года назад +1

      i remove heater and ac from the car.

  • @c2vts03
    @c2vts03 4 года назад +2

    hello, what kind of blow off valve did you put?

    • @miatahelix
      @miatahelix  4 года назад

      30euro oem audi TT blow off valve.

    • @c2vts03
      @c2vts03 4 года назад +1

      @@miatahelix great! Thank you!

    • @c2vts03
      @c2vts03 4 года назад

      I have another question ... how much pressure do you have? can the blow off open? I have mercedes m45 with the pulley stock. should do 0.3 bar ...

    • @miatahelix
      @miatahelix  4 года назад

      @@c2vts03 i have 0.5bar with 15% pullay.

    • @c2vts03
      @c2vts03 4 года назад

      @@miatahelix thank you so much

  • @LS-cm9fy
    @LS-cm9fy 2 года назад +1

    Hey
    How much money did you spend on this kit?

    • @miatahelix
      @miatahelix  2 года назад +1

      In 2020 when I bought the kit was around 2800euro, + the tuner, + some extra parts I wanted to add.

  • @blacksta-r
    @blacksta-r 3 года назад +1

    It feels abit tight

  • @scarfy1988
    @scarfy1988 4 года назад +1

    get it tuned at motorsports electronics!! i did.

  • @Dyl_Cam
    @Dyl_Cam 3 года назад +1

    How much psi? Stock belt?

    • @miatahelix
      @miatahelix  3 года назад

      7.25 psi with 15% reduce puley

  • @LewisFoster2024
    @LewisFoster2024 3 года назад +3

    The only thing that puts me off supercharging mine is the sound 😖

    • @miatahelix
      @miatahelix  3 года назад

      You can add second throtle body with a good isolation around your filter you can reduse the sound.

    • @LewisFoster2024
      @LewisFoster2024 3 года назад +4

      Will bare that in mind, I'm totally in favour of supercharging over turbo, it ties in with main aspect of the mx5 which is good throttle response, I just don't like the supercharger sound, like a knackered bearing

  • @madthough2298
    @madthough2298 4 года назад

    What sort of bypass are you running for closed throttle

    • @whiteforest09
      @whiteforest09 4 года назад

      I'd also like to know

    • @madthough2298
      @madthough2298 4 года назад +1

      @@whiteforest09 This setup has the throttle body between SC and the engine. It has a vacuum operated bypass valve that opens under low throttle position conditions, the vacuum signal comes from the intake between the throttle body and the engine.

    • @miatahelix
      @miatahelix  4 года назад

      sorry for late reply, my bypass is from a mini, it was in the kit i order from bofi racing.

  • @nicolasreed21
    @nicolasreed21 3 года назад

    What mirrors are those?

    • @miatahelix
      @miatahelix  3 года назад

      I don't remember the name but if you wand them i can sell it to you because i remove them.

  • @nicolasz32tt
    @nicolasz32tt 4 года назад

    How many power with me221 ?

    • @miatahelix
      @miatahelix  4 года назад

      Around 190hp with virtual dyno. Soon i will go for real dyno

    • @nicolasz32tt
      @nicolasz32tt 4 года назад

      @@miatahelix ok thanks

  • @Typhon888
    @Typhon888 Год назад +2

    You did all that work but can’t find a better location for the air filter??? Lol!!!

    • @miatahelix
      @miatahelix  Год назад

      Lol yes my air filter was my nemesis. From then I have changed 10 times the location, custom made airboxes ets. Now i have the most lightweight one, only 20cm straight pipe with filter at the end.

  • @bryanlucas6795
    @bryanlucas6795 3 года назад

    Where can I get this ???

    • @miatahelix
      @miatahelix  3 года назад +1

      If you meant the supercharger kit, check out bofiracing.com

  • @micahdubbs
    @micahdubbs 3 года назад

    What radiator?

  • @joserribera4888
    @joserribera4888 3 года назад

    Do u have fb or wasap

    • @miatahelix
      @miatahelix  3 года назад

      Yes facebook.com/Mx5Helix