Это видео недоступно.
Сожалеем об этом.
True North Motos KTM XCW/XCF-W Dual Sport Kit Install
HTML-код
- Опубликовано: 6 сен 2021
- Dan from True North Motos walks us through the full installation of their Dual Sport Kit w/ Turn Signals on a 2022 KTM 300 XCW. This install is for KTM, GasGas & Husqvarna bikes that came with a factory headlight.
00:35 Component Overview
03:35 Teardown
04:03 Removal of kill switch
05:08 Factory Harness
08:45 CEV Switch Install
16:37 Front Turn Signal Install
22:45 Sub Fender Removal
27:03 Sub Fender Assembly
27:45 Sub Fender Install
31:04 Rear Brake Switch + Adapter
35:44 Reassembly
36:28 Horn Install
Find more at:
www.truenorthm...
You just helped a TON of guys, thank you!
No problem. Glad it was useful for you.
That is one heck of a nice clean looking kit. I will be needing one of these.
Appreciate it.
Dan, If you get a 2022 TE 300i in for a dual sport kit please video it and post.
Thanks again!
Thank you for taking the time to make these ! just a suggestion maybe a brief pause or show detail on connection
Feedback taken. I will try and pause more for the connection in the next one.
Great job on the video! Love the hyperlinks.
Thanks!
After installing this kit on my bike. I think future customers would benefit from some type of a wiring / component diagram
We will be adding it on the site shortly.
At 24:10 he says deez nuts on purpose. Classic!
You're more Washington than Bigfoot
I am. What region do you claim?
Need this kit for my 2022 SX450-F
We have it.
Do you have the measurements for the replacement female disconnect?
@@liamfinnegan8085 can you clarify what you mean by female disconnect.
@truenorthmotos9965 The piece that you crimped the two red wires together with 19:10
@@liamfinnegan8085 we don’t use that anymore. We use a positap now and it’s much easier for pulling suspension.
@truenorthmotos9965 okay, I'll look up how to use that. Thanks for the prompt responses and the great video!
Does this kit allow for the 23' xcw 250 to use high and low beam?(Factory with headlight and taillight) Or is the seperate lighting kit needed aswell? Also would the mini-stalk kit come with the needed led relay or would a seperate one need to be bought?
Thank you for this video. Will help me greatly once I get the bike and this kit to convert it!
Yes it allows you to use hi/low with the oem lights. Comes with the LED flasher in the kit.
No problem. Glad you enjoyed it.
Very well done! Is the install the same for a 2022 Husky TE300i? I'm guessing TNM sells everything needed?
Thanks a bunch!
Close but the wiring comes in on the throttle side of the bike in the rear. Also the turn signal harness routes slightly different. Yes we have full kits for the TE300i on the website.
@@truenorthmotos9965 Awsome, thank you!
Hi, I am trying to collect info on the tidy tail light unit before I order one. In other videos I saw that a led signal flasher is needed to make the lights work properly, but I could not see you use one in your video. Why is that?
We did use one. If your doing it on an EXC or FES bike you’ll need to replace the factory one with an led flasher relay.
@@truenorthmotos9965 excellent, thanks
Does the same kit but with the oem signal comes with a plate holder that has a plate light?
Only the tail tidy will have a plate light. However, the oem tail light does illuminate the plate.
@@truenorthmotos9965 great thanks! Also do you have the part number of the headlight plug adapter or is it custom made?
@@melo5848 we make them.
@@truenorthmotos9965 oh ok great, I sent y’all an email concerning this item. If y’all can get back to me asap that would be much appreciated! Thanks again y’all are amazing!
Where you guys are located!!! I need your service!!!!
We are in Rainier, WA.
Would this work on a KTM 125XC?
What year?
@@truenorthmotos9965 2021
@@patrickflynn7793 you would need a slightly different kit. Reach out through the contact info on the site and I can get you dialed in.
@@truenorthmotos9965 Will do thanks