Hi, I buildding a Z370 Aorus Gaming Wifi PC with 32GB Ram (2x16GB=32) and a Samsung 970 Evo NVMe M.2 500GB and when i fire up for the first time without OS install, I the isue that in the motherboard sockets 4 and 2 doesn't work, keep flashing an d never turn on. With a single Ran installed in sockrt 1 or 3 fire up ok. What can I do to fix this problem? Thanks you for your time
i need ur help ... i have the exact same board and prozessor. and i only can select the "cpu upgrade" and not the "cpu clock ratio" if i use X.M.P i cannot use the cpu upgrrade funktion...
Hi, I'm sorry but you did not mention virtualization technology on the mother board. I have the same mother board and i'm struggling with these option because I can't find it. Thanks
Hello, I have a problem and I downloaded the operating system but when I turn on the computer, I get the bios and from the bios I have to start the operating system; but I want that when I turn on my PC, then I will fence the operating system, help
Hi, i have a problem with booting this motherboard. When i try to install windows via a USB drive it boots to windows but then it doesnt find the files to proceed with the instalation. Why is that? thanks
I am hoping you still respond but how do I determine if dual channel is working? The clock doesn't change regardless of the sticks configuration. I have mine in 2 and 4. Asus boards actually tell you dual channel enabled in the bios, these boards don't seem to mention it anywhere. Thank you very much.
my board is aorus gaming 7 OP (z370). question about bios updates and cpu performance. when going from f13 to f14, it did the microcode update and performance on the 9900k went from around 2200 to 1700. couldn't revert, so i purposely bricked the BIOS and initiated an emergency flash from the backup chip. reverted back to stock and went back to f13, getting 2200 again. is the tradeoff of CPU performance worth the gains of resizable bar? or is there a way to keep my 2200 score and benefit from f15b update?
Hey guys I'm having a problem installing the gigabyte app center it gives me a error 1920 Service Gigabyte Adjust (gadjservice failed to start) verify you have sufficient privileges to start system services I have tried everything to get it to work but it always does this half way threw the installation.I'm thinking maybe there is a bios setting that is keeping it from installing do you guys have any ideas? Oh my motherboard is a gigabyte x370 aorus gaming 5
Nice, thank you for the info's! .. I'am planning to buy a Z370 ultra gaming, because right now is very difficult to find MSI boards Z370.. in my preferred store... maybe I have to change the store.. ::)))
Can you plz help I am having issue with my gpu. The mb won't recognize it I have a msi gaming trio x 1080ti is there anything I can do in the bios thanks
Make sure you have the 1080 slotted in to the X16 PCIe slot even though that shouldnt keep it from recognizing the card it will keep it from running at its full potential.
umainebearman Lastest bios update talks about gpu compatibility, could be the solution. However it also includes the microcode fix, which on some boards is not working well?
Yea, Hey - Great. . . Thanks Man. Exellent walk through - Mine is the Z370 G-5 - Very similar if not the SAME - I've got a brand new build with an 8700K. The processor is sitting at Idle Mode Temp. of 90c. Is that BaD?
Got the same problem, already checked the water cooling system and everything is in place. Got any ideas as to what might be causing the issue? I do have a 1000W PSU which, I heard, may overload the processor with this particular motherboard. You think changing the Voltage to the CPU may fix this? If so, what voltage would you recommend? Weirdly enough, it's at 1.045 now and that's still way too hot. Tried changing it to 1.02 and nothing displayed in the monitor.
Still looks terrible i hate what Gigabyte has done with there bios layouts since the z170 z270 and z370 looks really cheap and low res when comapred to my old z87x-oc
This is the worst bios ever! I have a crappy Z370 gaming 7 which I no longer use. Bought a ROG Apex like I should have in the first place. If the Gigabyte crashes it sometimes wipes all your saved profiles, it won't run XMP profiles on top end memory and the menu's are a joke compared to a real enthusiast board.
Terrible motherboard. I have problems with it constantly, and there are no important features like virtualization. There is now no option to activate (only VT-d). And, of course, a high-end motherboard. High-grade rubbish is more accurate. A support center is beneath criticism. For each problem you offer the same solution, update your bios.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
how to disable SVM???
VIRUALIZATION?
Whoa just updated my bios, the clock was at 11:11, open your video, and boom 11:11
which buttons do I press when I power on to get there?
Bro i got up to 5.0 with no problem and i can stream and play pc games with no lag thanks!
Hi, I buildding a Z370 Aorus Gaming Wifi PC with 32GB Ram (2x16GB=32) and a Samsung 970 Evo NVMe M.2 500GB and when i fire up for the first time without OS install, I the isue that in the motherboard sockets 4 and 2 doesn't work, keep flashing an d never turn on. With a single Ran installed in sockrt 1 or 3 fire up ok. What can I do to fix this problem? Thanks you for your time
Such a nice groove man.Tight!
i need ur help ... i have the exact same board and prozessor. and i only can select the "cpu upgrade" and not the "cpu clock ratio" if i use X.M.P i cannot use the cpu upgrrade funktion...
Hi,
I'm sorry but you did not mention virtualization technology on the mother board. I have the same mother board and i'm struggling with these option because I can't find it.
Thanks
tpm 2.0 how can i activate it ?
5:48 Peripherals Tab -> Intel Platform Trust Technology (PTT): Make sure this is enabled
@@thinkcomputers1 thank you
How do you enable virtualisation on it
Exactly, I have been struggling to enable VT-x, I'm sure that my i5-9600K supports it...
On a z170 everything looks similar but I can't set the fans to choose a different temperature input.
i have x370 gaming k3 and i dont know what drivers should i download? there are a lot on the site. HELP
Hello, I have a problem and I downloaded the operating system but when I turn on the computer, I get the bios and from the bios I have to start the operating system; but I want that when I turn on my PC, then I will fence the operating system, help
I have same motherboard but i dont have HPET ? Why ?
any idea how to disable that annoying BEEP sound on startup?? anyone? -_-'
Hi, i have a problem with booting this motherboard. When i try to install windows via a USB drive it boots to windows but then it doesnt find the files to proceed with the instalation. Why is that? thanks
What device do you have set for your default boot device?
@@thinkcomputers1 the usb drive
can help me my z390 cannot go to bios whenever install my lenovo nvme but its working in my strix z270e. is it i really need 3.0x4 type. thanks
your cpu at 50x100 but voltage Auto how it can be?
Hello! Can you help me? How can i turn off the red display of the DB_Port? Thanks!
Good shit my nigga, very eloquent young man and some nice music in the background.
i dont see any boot sequence on my bios and i cannot boot my windows what to do now I just bought the motherboard yesterday
I can’t overclock my i7 8700k with z370 gaming 5 to 5 ghz even using ez oc or any other mode. Kindly help
Do u only have to choose cpu upgrade and nothing else?
How to reset it to default settings?
i want to disable my vitulization , i can't remember how to turn it on, For now i want to shut it down but i don't know how to find it
con que Button entro al setup?
What cooler do you have
I am hoping you still respond but how do I determine if dual channel is working? The clock doesn't change regardless of the sticks configuration. I have mine in 2 and 4. Asus boards actually tell you dual channel enabled in the bios, these boards don't seem to mention it anywhere. Thank you very much.
nice video, but what happens if i put EZ OC to performence? Do i get more heat? tnx
How do i setup my graphics card in bios setting
my board is aorus gaming 7 OP (z370). question about bios updates and cpu performance. when going from f13 to f14, it did the microcode update and performance on the 9900k went from around 2200 to 1700. couldn't revert, so i purposely bricked the BIOS and initiated an emergency flash from the backup chip. reverted back to stock and went back to f13, getting 2200 again. is the tradeoff of CPU performance worth the gains of resizable bar? or is there a way to keep my 2200 score and benefit from f15b update?
Hey guys I'm having a problem installing the gigabyte app center it gives me a error 1920 Service Gigabyte Adjust (gadjservice failed to start) verify you have sufficient privileges to start system services I have tried everything to get it to work but it always does this half way threw the installation.I'm thinking maybe there is a bios setting that is keeping it from installing do you guys have any ideas? Oh my motherboard is a gigabyte x370 aorus gaming 5
Hi, can you tell me how to disable Secure Boot in X299 AORUS Ultra Gaming Pro BIOS
Button entro a la Bios?
DEL
How do you edit your boot sequence mine won’t recognize my hdd only my ssd so I can’t actually boot up into windows I just blue screen
Why my cpu frequency is gray out and i can not change
Crazydragon189 do u have a K processor
Thanks mate
I have a Gigabyte Aorus Z390 gaming pro (non wifi) what is the best way to set up the bios to accept a 2nd m.2 ssd as my other hard drive?
how tf u enable integrated graphics on this
Can I set to 4.0ghz on i7 8700k?
Why is memory frequency grayed out?
is it worth updating the audio drivers for this board?
Can I reach 5 ghz of i5 8600k with gigabyte Z370XP SLI motherboard?
How did you enter BIOS what did you press I have the exact same board!
J Sub push delete when u turn it on push alot of times to get in the bio
my cpu core ratio is locked, it wont let me change it??
delaveishi Just try hitting + or + on the keyboard? Worked for ke
Hi how do you update the bios. I can not find the flash mode for the usb key. Thankss
usb stick should be fat 32
Nice, thank you for the info's! .. I'am planning to buy a Z370 ultra gaming, because right now is very difficult to find MSI boards Z370.. in my preferred store... maybe I have to change the store.. ::)))
dont buy this shit
Don't ever buy msi components ever
Can you plz help I am having issue with my gpu. The mb won't recognize it I have a msi gaming trio x 1080ti is there anything I can do in the bios thanks
Make sure you have the 1080 slotted in to the X16 PCIe slot even though that shouldnt keep it from recognizing the card it will keep it from running at its full potential.
umainebearman Lastest bios update talks about gpu compatibility, could be the solution. However it also includes the microcode fix, which on some boards is not working well?
Yeah, it's really awesome.... restoring defaults for the millionth time instead of actually saving and exiting everything.
link
Very good video bro! One question, if I use the auto overclock to overclock t 4.8 ghz, is it safe to do that? they wont put the cpu voltage over 3 ?
King Crew I just tried it and my voltage is currently 1.42 volts so don't do it haha
David Stewart ?
I have EZ OC and under it it says not supported here. Any idea why? My CPU is g3930 maybe it can't be overclocked?
F4 bios btw
The g3930 is not designed to be overclocked...
Yea, Hey - Great. . . Thanks Man. Exellent walk through - Mine is the Z370 G-5 - Very similar if not the SAME - I've got a brand new build with an 8700K. The processor is sitting at Idle Mode Temp. of 90c. Is that BaD?
That is pretty hot
Got the same problem, already checked the water cooling system and everything is in place. Got any ideas as to what might be causing the issue? I do have a 1000W PSU which, I heard, may overload the processor with this particular motherboard. You think changing the Voltage to the CPU may fix this? If so, what voltage would you recommend? Weirdly enough, it's at 1.045 now and that's still way too hot. Tried changing it to 1.02 and nothing displayed in the monitor.
Hi, I called GiG. and they told me to remove a stick of ram to boot and it worked fine since.
Ver nice!
Still looks terrible i hate what Gigabyte has done with there bios layouts since the z170 z270 and z370 looks really cheap and low res when comapred to my old z87x-oc
He goes through what im already seein... no idea what half of them mean, preciate the time and effort but not as helpful as i wanted
Well it says over view not tutorial.
This is the worst bios ever! I have a crappy Z370 gaming 7 which I no longer use. Bought a ROG Apex like I should have in the first place.
If the Gigabyte crashes it sometimes wipes all your saved profiles, it won't run XMP profiles on top end memory and the menu's are a joke compared to a real enthusiast board.
i buy this motherboard. If i turn on intel turbo boost 2.0, i will get bsod. Also you need to turn off many other settings, the worst motherboard
update the bios
This board is a bit cryptic..
Terrible motherboard. I have problems with it constantly, and there are no important features like virtualization. There is now no option to activate (only VT-d). And, of course, a high-end motherboard. High-grade rubbish is more accurate. A support center is beneath criticism. For each problem you offer the same solution, update your bios.
this is one ugly bios. damn.
1sikteg the older z87 and z97 bios looks much nicer