Arrived yesterday! $209 w/DR28 crazy deal. This car is awesome 2wd all-road basher! Had me grinning entire time driving. Love the body, favors fast& Furious challenger! Gonna turn this into a Mad Max Thunderdome type street/rally basher
I wanna drift this bad boy. it has a gyro built in, and it seems to handle incredibly well. all I need is a set of drift wheels and a body that doesn't look ridiculous with small wheels on it
Just received mine last week ( green Reakt) . Beautiful body shell, although decals had little air bubbles trapped inside, nothing the X-acto fine point blade couldn't fix. Front tires are crap, they almost ate all the rubber with just a few passes (one or two hours of asphalt drag use), but great traction. Rear tires are stronger, beefier, last way longer. Servo still working flawlessly, ESC super cool after dragging many many times with 3S ,70C 5000mah lipo battery. 2S is waaaay too boring for this car. Motor never got warm. Had to lift the body two holes with the body posts to avoid scratches to the green shell. Transmitter/ receiver are crap, no more than 125 or 135 feet range and lose control of the vehicle. The AVC feature is fantastic though. Worked flawlessly. But goodbye to that tx/Rx and hello to my Spektrum SR315 and DX5R tx ( so no more AVC gyro) unless an external gyro be installed. Easy peasy. Stock 30WT shock's oil replaced with 50WT for better handling and cornering. Included decals are not precut. No big deal. Overall, very customizable kit , fun to drive, and very satisfied with it. Great job TA, with the DR10.
Just got one of these and it is a great running car. I love how it handles, which is kinda unexpected for a drag car. Turning around after a run is kinda fun because it has a very short turn radius. My son loves it too. What kills me is they call this a 1/10 scale, yet it is as big as our Kraton. Comparing it to the Arrma Granite, the Granite looks like a 1/16 scale sitting next to it.
Brett, my favorite reviewer of any RC vehicle does it again!!! 👏👏👏🔥🔥🔥💯💯🍻You do such a great job my friend. Don't ever quit Amain hobbies. Your presentation is so fluid and precise, I can't get over it. Your the best hands down! This video is absolutely amazing covering everything i needed to know. When i do my unboxing video, I'm going to have to share this video in the link for sure. Thank you guys for all your hard work and dedication to the hobby. We appreciate it. ❤😎
Hi Brett, I love how you make everything to do with rc look so effortless, you controlled it off the start line like a champ, I’d be upset if we were in the same qualifiers, dang. I’ve seen people with these wee cars, trying this, changing that and trying the other, and they all can’t take off in a straight line, crashing into kerbs, cars,trucks and lamp posts, damaging their cars and costing a small fortune to fix them. One guys tyres had come unstuck and it took him a week or more to find it out. Here’s me thinking 💭 are those rc’s crap, surely it can’t be the driver.......but I’m sorry to say it was. They were swapping out everything, and I mean everything, escs, motors, shocks,springs,wheels and tyres multiple times. After seeing what you did with it, the cars great straight out of the box!!! lol. You were controlling the steering how i used to do it when I raced rc’s, I’m glad I have been doing it right all these years, my competitors used to laugh at me when they heard my steering stick springing back all the time. Anyoldwho enough spouting. Awesome video Brett, and the car stole the show. 😎👍👍👍🇬🇧
Awesome!! Just made my choice and will build the shhhhh out of it!!! Just as I was getting the bandit..or losi this will be my dragster!! Wish arrma would build something my typhon and infraction are 👍
Sc10 is a great chassis...this modified one does give a realistic look. Slipper clutch was loose and the gearing is a bit low imo but both of those can be fixed easy.
Old Chevelle, Goat with 1980 Monte Carlos tail light which hoodscoop & colors scream, Mopar. Still looking good & about perfect for shorts City blocks.
Someone i know has a dedicated drag car, so i took my slash 2wd brushless, lowered my custom wheelie bar, and won multiple times on a 2s. also my gearing is 23t pinion 86t spur which has way less torque but wont stop wheelieing on a 2s i cant wait to get a 3s.
Just bought this car should be here by Friday. Also bought the pro my body for it with the wing. Can’t wait to see what this little thing will do once I twisted up.
Thank you so so very much for the video. I bought the Team Associated Trophy Rat Rod and it shares the same plate form. DR-10. With that being said, I would like to convert to to a drag care. Will not be in comps, so I will not change out my 3 cell. With that being said, beside having to get tires, a body(shell) drag bar, and the metal/aluminum stabilizer for the back, what else would I need to make this a worth while dragster as I am off to an already good start. Thanks for all the great videos and information. So glad I subscribed and HIT THE BELL
Sounds like a fun conversion! You could just use the vehicle as is, maybe add a wheelie bar of your choosing. But if you want to fit Street Eliminator style bodies, you will need to narrow the vehicle to the correct width, requiring the DR10 suspension arms, turnbuckles and rear driveshafts; maybe body mounts too? -Brett
wow how do you do your audio? it has some seriously nice limiting and compressors going on, sounds almost like ... I dunno .. 90s infomercials? but in a good way :D
First off, I can't believe how much these RC cars have improved over the years!! That thing is an absolute monster😈 One question, does the body roll reduce the performance of the vehicle? Could you modify it with a stabilizer bar or should the car not be modified and keep it's old school style stance? Either way, this car is a force to be reckoned with👍🏽
A stabilizer bar would be a great addition for competition use, and there are a few companies now offering them. But the body roll isn't necessarily bad if you're just trying to have fun. -Brett
Great video. I received mine yesterday in green. Body and spoiler almost perfect. I am missing 1 bearing at the left rear outer. Other than the bearing I love it.
Man I have been wanting to get a no prep car and this one looks to be the one for me! I don't know that I could change the shock oil and spring rates after seeing it move so scale! lol
@@GreatBirdOfHope I think rtr stands for ready to run so it'll go straight out of the box whereas no prep means you won't need to prep the surface you're driving on so it's saying you can run it on just normal asphalt instead of a sticky drag prepped surface
Hey my friend I was curious on what happens if u had no wheelie bar on the dr10 1/10 drag car will it do a backflip or will it spark a little because of the metal shell on the rc car... I love ur videos
If you have the traction to pull a wheelie, the car would flip back upon accelerating. No sparks will be produced; the body is made from polycarbonate plastic; but the car will skid on the lid. -Brett
@@AMain_Hobbies hey friend I'm going to get one soon but it's a combo and I will also get a 3s lipo battery and have fun with it and it green.... and I wonder if u could drag race with others in one day? Ur the best thnks friend
When I do get the rc drag car I'll being doing a live video of unboxing it and also talk about how well it goes but I might be doing it outside somewhere to do it for u all who loves rc cars and amain hobbies give that guy some love and help him get more views thnk u for ur support and brett
No prep raceing guys shave down the rubber on the bearings , believe it or not there is a notable difference, it's smoother and hub/tire spins longer. Just a tip the Pros use. Every little bit of legit mods to help perform your fastest passes
Because the Mk2 is so lightweight, that should work. That ESC is compatible with 3300kv motor on 3S, or 3900kv motor on 2S. Be patient to set your pinion gearing correctly and you should be ok. -Brett
Please can I ask your gent in your youtube video said that the dr10 will fit a corvette c7 drag bodyshell well my mate has 1 for sale for £ 20 pound but he says it's for a 2wd slash so in your youtube video will it fit ? If you say yes I will buy it.thank you Andy Timson from England
Hey Andy, there are a few different corvette bodies, but only one made to fit the drag car. If he has this body it will fit the dr10: www.amainhobbies.com/protoform-chevrolet-corvette-c7-1-10-promod-short-course-drag-car-body-clear-prm1571-40/p1002365 But it's hard to know exactly what version he has. Maybe you can ask him to confirm the version. -Brett
Do you what parts are different on this than the RB10? I found a cheap dr10 roller but I want it back to a regular buggy? Or should i just put regular tires on it like the rb10 and run it like a normal car?
Not sure exactly on that exactly. I do know the DR10 uses the longer short course chassis, but swap that out and get yourself buggy tires and body, and should be good to go. Here's the shorter RB10 chassis: www.amainhobbies.com/team-associated-sr10-chassis-asc71092/p1316967 -Brett
Hmm interesting. I thought the chassis would have looked more impressive. A little beefier. The wheels and the body are the selling points. Like a rustler modded.
Please can I ask what spares is there on the market in England ? & I would like to say there is not any spare tyres on amazon.thank you Andy Timson from England
There are so many parts and upgrades Andy! Here is our full DR10 parts category. You can utilize the filters on the left to filter by brand; most Team Associated parts are factory replacements (a few upgrades though), with the other brands offering upgrades and accessories: www.amainhobbies.com/team-associated-dr10-parts/c16336 -Brett
Hey,Thank you for answering my question he has the same grey,black,yellow bodyshell that you pointed to in your youtube video that you said will fit,so I was only making sure.
Arrived yesterday! $209 w/DR28 crazy deal. This car is awesome 2wd all-road basher! Had me grinning entire time driving. Love the body, favors fast& Furious challenger! Gonna turn this into a Mad Max Thunderdome type street/rally basher
I wanna drift this bad boy. it has a gyro built in, and it seems to handle incredibly well. all I need is a set of drift wheels and a body that doesn't look ridiculous with small wheels on it
How is drift conversion going?
"This is the dr10 drag car"
While jumping it..😂
f*ck yeah. jump it, bash it, wheelie it, who cares.
honestly the jump made me want it more LOL 😂
.... also I'm not gonna lie I've watched the end with him blasting off the curb more times than I'd like to admit, 💯 will be me when I get one 🤣
you can tell that brett genuinely loves his job and that is great. I wish I worked at AMain
OK SOOOO I always buy my stuff from amain. I also wish I worked there but I live in Canada .
drill a hole it top plate of the receiver box and get a rubber plug that fits in it so you can just pop that off to adjust the gain
Or just turn the DVC off, and drive it like a real man. 🤷🏻 No hole needed...
That Team Associated 2WD chassis is rock solid. Love that platform.
Yep.. Same chassis on my SR10. It's a toughy for sure and solid as a rock. 🤘
Just received mine last week ( green Reakt) . Beautiful body shell, although decals had little air bubbles trapped inside, nothing the X-acto fine point blade couldn't fix. Front tires are crap, they almost ate all the rubber with just a few passes (one or two hours of asphalt drag use), but great traction. Rear tires are stronger, beefier, last way longer. Servo still working flawlessly, ESC super cool after dragging many many times with 3S ,70C 5000mah lipo battery. 2S is waaaay too boring for this car. Motor never got warm. Had to lift the body two holes with the body posts to avoid scratches to the green shell. Transmitter/ receiver are crap, no more than 125 or 135 feet range and lose control of the vehicle. The AVC feature is fantastic though. Worked flawlessly. But goodbye to that tx/Rx and hello to my Spektrum SR315 and DX5R tx ( so no more AVC gyro) unless an external gyro be installed. Easy peasy. Stock 30WT shock's oil replaced with 50WT for better handling and cornering. Included decals are not precut. No big deal. Overall, very customizable kit , fun to drive, and very satisfied with it. Great job TA, with the DR10.
Just got one of these and it is a great running car. I love how it handles, which is kinda unexpected for a drag car. Turning around after a run is kinda fun because it has a very short turn radius. My son loves it too.
What kills me is they call this a 1/10 scale, yet it is as big as our Kraton. Comparing it to the Arrma Granite, the Granite looks like a 1/16 scale sitting next to it.
Got my dad one of these along with the hoosier tires and a 21T pinion. This thing is awesome and hauls!
Does it hook?
Brett, my favorite reviewer of any RC vehicle does it again!!! 👏👏👏🔥🔥🔥💯💯🍻You do such a great job my friend. Don't ever quit Amain hobbies. Your presentation is so fluid and precise, I can't get over it. Your the best hands down! This video is absolutely amazing covering everything i needed to know. When i do my unboxing video, I'm going to have to share this video in the link for sure. Thank you guys for all your hard work and dedication to the hobby. We appreciate it. ❤😎
Thanks Tom! Share it all you want. I'll keep an eye out for your video.
-Brett
Just bought this yesterday. Can't wait to review it on my channel.
I love to see a build series on this car
the build comes when you start changing gears in the rc drag car and maybe changing the motor.
Hi Brett, I love how you make everything to do with rc look so effortless, you controlled it off the start line like a champ, I’d be upset if we were in the same qualifiers, dang. I’ve seen people with these wee cars, trying this, changing that and trying the other, and they all can’t take off in a straight line, crashing into kerbs, cars,trucks and lamp posts, damaging their cars and costing a small fortune to fix them. One guys tyres had come unstuck and it took him a week or more to find it out. Here’s me thinking 💭 are those rc’s crap, surely it can’t be the driver.......but I’m sorry to say it was. They were swapping out everything, and I mean everything, escs, motors, shocks,springs,wheels and tyres multiple times. After seeing what you did with it, the cars great straight out of the box!!! lol. You were controlling the steering how i used to do it when I raced rc’s, I’m glad I have been doing it right all these years, my competitors used to laugh at me when they heard my steering stick springing back all the time. Anyoldwho enough spouting. Awesome video Brett, and the car stole the show. 😎👍👍👍🇬🇧
Thanks Mikey. It's a straight shooter but the DVC assisted steering sure helps too!
-Brett
I loved when drove the Slash on its back wheels wide open 3S !
I really enjoy watching your videos Brett. You do an excellent job narrating. Keep up the the good work!!
Excellent! Thank you for watching Eric.
-Brett
Great video, really enjoyed it. Somehow this reminds me of Starsky & Hutch with their Ford Grand Torino, must be those airborne scenes :-)
Great review! I'm pretty impressed at how straight it went. I'd have to change that body though.
This guy always does great videos!!
Body roll is kinda cool. Looks like a fun car.
This guy is baked out of his mind, I love it haha
I swear it always makes any kind of video better lol
god damn I didn't realize until I saw your comment but he so is lmfao
Looks like a Domino's driver who digs a wedgie out his ass when he steps out of a 1989 Ford Ranger and digs a booger before ringing your doorbell.
@@Basilisk_in_a_dark_room Well, you're wrong...
Hugely helpful video Brett. Thanks.
Favorite review so far on this. Still debating if I want to invest or just build my own
What did you decide
@@aubreyvalentine7711 building my own
Needs a locked rear diff 👍 nice though
fill it with wax instead of grease.
Spool...
Awesome!! Just made my choice and will build the shhhhh out of it!!! Just as I was getting the bandit..or losi this will be my dragster!! Wish arrma would build something my typhon and infraction are 👍
Dang! That's a nice looking Tesla in the background!
I wish my road was that smooth
Sc10 is a great chassis...this modified one does give a realistic look. Slipper clutch was loose and the gearing is a bit low imo but both of those can be fixed easy.
I just got mine today exactly same car and good deal from my local hobby shop!
Old Chevelle, Goat with 1980 Monte Carlos tail light which hoodscoop & colors scream, Mopar. Still looking good & about perfect for shorts City blocks.
I left this tab of this video open for like 2 weeks or 3 weeks and just eneded watching it
Someone i know has a dedicated drag car, so i took my slash 2wd brushless, lowered my custom wheelie bar, and won multiple times on a 2s. also my gearing is 23t pinion 86t spur which has way less torque but wont stop wheelieing on a 2s i cant wait to get a 3s.
Sure, sure..
Awesome vid as always Brett! 1st person to get one of these and mod it into a Mad Max Interceptor wins!!!
Just bought this car should be here by Friday. Also bought the pro my body for it with the wing. Can’t wait to see what this little thing will do once I twisted up.
Oh god I can just see all the other big brands getting into drag
O god i can see Traxxas finding a way to make the same thing and charge twice as much👍
traxxas made a drag car year's ago. it was a funny car. losi recently announced that they are going to be dropping Ann car like the Dr 10.
Yeah traxxas did.
@@TheMattman41 when did they make a short course chassis drag car?
R/C drag cars have been around for a WHILE already.... Nothing new. Various different manufacturers have already been making them.
Nice vid Jack - nice car - looks a lot of fun! Love your ramps 👍 But boy do I wish you posted that yesterday - keep an eye out why in a few days....
It sure looks good! I've been watching lots of your videos, there great!
Been thinking on building something like this, nice to see,might be getting one I hope...
So with decals you need to cut them out and apply them to the body. Thanks for including that info, I would have struggled to work that out
It looks awesome!
It really does. It looks great
It IS awesome!
Thank you so so very much for the video. I bought the Team Associated Trophy Rat Rod and it shares the same plate form. DR-10. With that being said, I would like to convert to to a drag care. Will not be in comps, so I will not change out my 3 cell. With that being said, beside having to get tires, a body(shell) drag bar, and the metal/aluminum stabilizer for the back, what else would I need to make this a worth while dragster as I am off to an already good start.
Thanks for all the great videos and information. So glad I subscribed and HIT THE BELL
Sounds like a fun conversion! You could just use the vehicle as is, maybe add a wheelie bar of your choosing. But if you want to fit Street Eliminator style bodies, you will need to narrow the vehicle to the correct width, requiring the DR10 suspension arms, turnbuckles and rear driveshafts; maybe body mounts too?
-Brett
The SR10 is the same platform, with just a few different parts that you could change.
Great review, much appreciated.
great video bro
Pokimane didn’t know Pokimane was interested in RCs
That's pretty freakin cool man. Great videos btw
wow how do you do your audio? it has some seriously nice limiting and compressors going on, sounds almost like ... I dunno .. 90s infomercials? but in a good way :D
As always great content. Good job dude
Great video guys I love the car grey stuff👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🔥🔥🔥🔥🔥🔥
1st upgrade . slipper clutch eliminater ...
How
You don't need that.. Just crank the spring down, it WILL lock.
First off, I can't believe how much these RC cars have improved over the years!! That thing is an absolute monster😈 One question, does the body roll reduce the performance of the vehicle? Could you modify it with a stabilizer bar or should the car not be modified and keep it's old school style stance? Either way, this car is a force to be reckoned with👍🏽
A stabilizer bar would be a great addition for competition use, and there are a few companies now offering them. But the body roll isn't necessarily bad if you're just trying to have fun.
-Brett
AMain Hobbies Thanks for the info!! I think a Dodge Demon RC video would be great if there is one🏎🏎🏎🏎😎
@@langstonwilliams5530 Nothing on the Demon but one on the Hellcat: ruclips.net/video/L3w8eDpJnDk/видео.html
-Brett
Great RC review.
Would love to have a drag car but i feel like i would suck at it😬Great video amain😎🔥
I need to throw some slicks on my Baja Rey and go line some fools up.
Great informative video ....would love to have one of these but can't afford a hobby grade RC tho
Excellent vid and explanation.
Great review, thanks! Any word if AE will be releasing a kit version?
Not sure, haven't heard any info on that.
-Brett
It's out!
www.amainhobbies.com/team-associated-dr10-electric-drag-car-race-kit-asc70027/p1221631?gclid=CjwKCAiAkan9BRAqEiwAP9X6UceNxAcL6WxNRjVFAMrPUmDEL5dHMNOinZIaUe7lzER6xohkT3W4IBoCZ5gQAvD_BwE
Great video. I received mine yesterday in green. Body and spoiler almost perfect. I am missing 1 bearing at the left rear outer. Other than the bearing I love it.
The hub was missing a bearing? That's really strange. Did you get another one sent out?
-Brett
@@AMain_Hobbies No I bought it from HobbyTown and have sent them an email. Waiting to hear back from them.
Hey Brett can you run NIMH in this car also or not
@@marktomlin1442 Yes. The ESC supports both. Just have to change the settings
very nice, i love your vidéo good job 👍👍👍👍
I got the green DR10 n bought it from AMain too
certified ripper brother!!!!
great vid, nice ride. new sub here
Thanks for the sub!
-Brett
Nice rc been looking at the drag cars just can't afford it
Any chance of a kit version? For those that want to use better electronics and tires and body?
Haven't heard anything about that, but I wouldn't rule it out.
-Brett
Y is amain hobbies always out of stock?
Man I have been wanting to get a no prep car and this one looks to be the one for me! I don't know that I could change the shock oil and spring rates after seeing it move so scale! lol
What is the difference between rtr and "no prep"
@@GreatBirdOfHope I think rtr stands for ready to run so it'll go straight out of the box whereas no prep means you won't need to prep the surface you're driving on so it's saying you can run it on just normal asphalt instead of a sticky drag prepped surface
@@GreatBirdOfHope "No Prep" is simply the name of the race series. Thats all
May need a green one in my life. 🤔
Super cool. Thanks
I just killed the idler and diff gear with my dr10 with 2c batt 5200mah had the slipper adjust way to tight
I have mine on a new motor with 6s lipo, esc, and some aluminum body upgrades.
And now your not legal to race it in any actual class... Good job. Have fun racing by yourself. 🤦🏻
That is cool they can't call it a duster
NIIIIIIIICE!!! I NEED 1!
Man when i was a teenager i had a 69 buick special deluxe and omg best car ever smoothest ride ive ever experienced
That's excellent I wish I was rich. There's about 12 cars/trucks I NEED
2:50 wasn‘t there the traxxas funny car or how its called
Yeah
@@nathanz602 probably just a practice day or it could've been practice
My stepdad met the guy that made the DR 10 pog
How yours pop wheelies mine don’t and I’m running it if the stock 2s battery
Probably a lack of traction. Ours didn't like to wheelie without a tons of traction.
-Brett
@@AMain_Hobbies ok thank you
Hot Racing makes a spool for this car, would you lock it up or keep the diff open ?
Might be worth a try. I hear guys are already trying heavy fluids like 500wt. With good traction, a spool seems like the way to go.
-Brett
i might buy one and make into a drifty boiii
Quick question is the Traxxas o Latrax a solid RC starter car
Yeah you bet. Which model were you looking at?
-Brett
AMain Hobbies Just the latraxx red body I don’t think there’s any specific model of it that I could find on their website
My local no prep doesn’t allow 3s. Heads up people.
It should all be 3S. Who runs 2s in anything these days? It takes all the fun out of it.
@@markclausson564 Racers are 2S bashers use 3S but I agree there at least needs to be an unlimited class.
@@markclausson564 Most racing classes run 2S, that's who..
It'd be interesting to see these used in some sort of Touring car class but another new class is really the last thing anyone needs
he forgot to mention the plastic gears in the transmission...also you rubbed through the paint on the front fenders
You guys should make an app for online shopping
Hey my friend I was curious on what happens if u had no wheelie bar on the dr10 1/10 drag car will it do a backflip or will it spark a little because of the metal shell on the rc car... I love ur videos
If you have the traction to pull a wheelie, the car would flip back upon accelerating. No sparks will be produced; the body is made from polycarbonate plastic; but the car will skid on the lid.
-Brett
@@AMain_Hobbies hey friend I'm going to get one soon but it's a combo and I will also get a 3s lipo battery and have fun with it and it green.... and I wonder if u could drag race with others in one day? Ur the best thnks friend
When I do get the rc drag car I'll being doing a live video of unboxing it and also talk about how well it goes but I might be doing it outside somewhere to do it for u all who loves rc cars and amain hobbies give that guy some love and help him get more views thnk u for ur support and brett
When is TLR's coming out?
Wowww coooooool👍👍👍👍👍😮😮😮
And I thought my hawk going 32mph on a 2s was slow lol hmm guess I need to get a 3s and see how fast she will go with the same esc and motor
I have the same setup from team associated drift car so ready for a event have to get wheelie bars
will any 1/10 scale body fit? do you know if the kyosho 1970 dodge charger body will fit the dr10 chassis?
No prep raceing guys shave down the rubber on the bearings , believe it or not there is a notable difference, it's smoother and hub/tire spins longer. Just a tip the Pros use. Every little bit of legit mods to help perform your fastest passes
Just remove the rubber cover altogether..
Will this car’s speed controller and motor overheat if installed on a Kyosho Fazer MK2 (4wd)? Or should it only be used on a 2wd vehicle? Thank you!
Because the Mk2 is so lightweight, that should work. That ESC is compatible with 3300kv motor on 3S, or 3900kv motor on 2S. Be patient to set your pinion gearing correctly and you should be ok.
-Brett
@@AMain_Hobbies The 3300kv motor is compatible with BOTH, 2S and 3S. The 3900kv is for 2S only.
Lol! Ive raced with those "HotBodies" drivers.
Currently half price. Get it while it's 🔥.
Brad looks like a clapped out Rodney Dangerfield
Looks like it has the same chassis as a traxxas slash 2wd with the lcg chassis.
No. Its made by A.E., not Traxxas.
It DOES have the same chassis as the A.E. SR10.
I have a sidewinder 4 7700kv motor and ESC. I'm looking for a car to put it in. How would it do in this car?
what is the kids name that is narrating ? I think i talked to him on the phone when i called the store.
It's Brett
-Brett
Proline should make 1998 Toyota Supra MK4 body for those drag cars
Nah... This ain't "The Fast and the Furious"
the slipper was slipping a bit on 2s. tighten that thing up, JEEEZ!!!!
Wondering if the T4.1 rear sway bar set, would fit? Just mite.
Might be worth trying in the back, could detract from the droop up front.
You don't want a sway bar on the front of a Drag Car.
Please can I ask your gent in your youtube video said that the dr10 will fit a corvette c7 drag bodyshell well my mate has 1 for sale for £ 20 pound but he says it's for a 2wd slash so in your youtube video will it fit ? If you say yes I will buy it.thank you Andy Timson from England
Hey Andy, there are a few different corvette bodies, but only one made to fit the drag car. If he has this body it will fit the dr10: www.amainhobbies.com/protoform-chevrolet-corvette-c7-1-10-promod-short-course-drag-car-body-clear-prm1571-40/p1002365
But it's hard to know exactly what version he has. Maybe you can ask him to confirm the version.
-Brett
Do you what parts are different on this than the RB10? I found a cheap dr10 roller but I want it back to a regular buggy? Or should i just put regular tires on it like the rb10 and run it like a normal car?
Not sure exactly on that exactly. I do know the DR10 uses the longer short course chassis, but swap that out and get yourself buggy tires and body, and should be good to go.
Here's the shorter RB10 chassis: www.amainhobbies.com/team-associated-sr10-chassis-asc71092/p1316967
-Brett
Turn mine into a Corvette from a New Bright shell . .....
Hmm interesting. I thought the chassis would have looked more impressive. A little beefier. The wheels and the body are the selling points. Like a rustler modded.
The chassis is solid as a rock...
Anyone know What gearing would I have to have in order to run a 5700kv castle brushless system with his car? How many tooth pinion/spur?
Please can I ask what spares is there on the market in England ? & I would like to say there is not any spare tyres on amazon.thank you Andy Timson from England
There are so many parts and upgrades Andy! Here is our full DR10 parts category. You can utilize the filters on the left to filter by brand; most Team Associated parts are factory replacements (a few upgrades though), with the other brands offering upgrades and accessories: www.amainhobbies.com/team-associated-dr10-parts/c16336
-Brett
Hey,Thank you for answering my question he has the same grey,black,yellow bodyshell that you pointed to in your youtube video that you said will fit,so I was only making sure.