Making a Steel Rose
HTML-код
- Опубликовано: 4 апр 2016
- Crafting a rose from scrap. The petals are made from sheet metal off an old sauna heater i found rusting away in the woods.
The round stock i found by the sea shore. It was used to bind logs together during shipping.
------------------------------------------------------------------------------------------------------------
music by audionautix.com
Jason Shaw - Back to the woods
under a Creative Commons attribution license
audionautix.com/ 
Хобби
Thank you for this, I just finished mine. It's going to look good on my moms grave. So again, thank you.💞💖💝💖💞
I would make sure that you treat the metal before leaving it outside. Especially if you intend to leave it there for a long time since it might rust all the way through in places
@@stormyeffects4795 I did
@@sleepinghermit7778
That’s really nice of you to do that. I hope that it brings you some form of closure or relief. You sound like a good kid.
FinnCrafted: I made a couple of these today.
Few things...I really think the texturing of the petal edges with the edge hammer makes the difference between yours and others. I copied your edging, and it came out great. These little details often make the difference between an average effort, and one that is really outstanding. That simple hammering of the petals with an edged hammer took this from an average metal rose to a hand-hammered beautiful rose, and I appreciate your efforts.
At first I thought you had the bottom rose flower casing the other way around. I reversed mine so the raw edges, any remaining, would be down. Then I re-viewed your video and saw you do the same thing. Good deal!
Finally, I had a problem with the pieces in general staying put on the stem, (they tried to spin), or in this case, the metal rod. I could not get the pieces to hold tight to the bottom of the ground section. I made it work by simply hammering the top of the stem so it was enlarged, then putting on all the pieces from the bottom of the stem. Then holding them fast to the enlarged top, I welded the bottom piece to the rod, which bled through a couple of layers, but made them all tight and ready for forming.
Different, but it worked.
Again, thank you for this video...I am always looking for things to enhance my own skills, and this was one great idea and I can execute it without too much difficulty.
Thanks again!!
Thanks for a long comment! Happy that you had good success with your roses. Hammering the petals does make a big difference, especially the edges. I could not get them to stay put either, so I just let them spin freely and call it an "organic design". Real roses also have what is called a receptacle below the petals, so putting some welds there can actually make it look more realistic.
What are the diameters of the circles? It shows that the first one is 40mm but they appear to be different sizes. The measurements for all the circles would be extremely helpful.
As a 46 year woodworker who now does woodworking to supplement my retirement, this is exactly the kind of item I have been looking for to add to my wood medium. A wooden vase of these? Sell instantly.
Incredibly well done, and I like yours over numerous others I have seen online.
Thanks, and excellent work! Keep it up!
Glad you like it. I wanted to make the video as this rose does not require special blacksmithing equipment like many others I have seen. Go ahead and make a bunch of them. Hope they will make someone happy!
Thanks so much for taking the time to share your amazing art. Much appreciated!
Best rose turtorial ever! Thx
REALLY who da fuck disliked this man great craftsman ship. like really come on man
People who are jealous of his talent.
MrAlittle5150 truue
Mr E ughh
MrAlittle5150 double ughh
Mr E vI don't wanna
Wonderful video! Keep they coming!
That's really good craftsmanship. Great rose, good idea great video 👍
I would try and maybe do the rivet a different way. Perhaps grab a piece of flat steel, make a hole in the center bigger than the radius of your rod, and put it on top of the sheets (while they're on the rod like 5:19) and find a way to also clamp it to the rod itself so as to squeeze the sheets against it. Then hammer on the rod sticking out, and squish it down to the oversized hole you'd have on that peace of flat bar. You'd have a nice and solid rivet clamping down the sheets hard (possibly even welded if you heat up the sheets during the process).
I'm really backseating hard right now because unfortunately I don't have the tools to attempt even making that rose in the first place, but the whole thing rattling around as you were grinding gave me anxiety. Also maybe grind it before sticking it on the rose.
Amazing video!
Thats awesome, great work!
I love your work my man. Your multi-talented methods, and your creativity. Big fan!!
Beautiful! Thanks for sharing.
Forging roses is pretty fun, I like that very much and have forged 7 roses already :)
That's absolutely beautiful!
First time making one after watching this was a success, wish I could post a picture of it . I clear coated the shit out of it. It gave it a nice shine and bonded the loose pedals together. Thanks for the upload!!!!
@Jordon what sheet metal did you use?
0.5 ?
That's beautiful.
This is fantastic! Thanks for sharing.
Thanks, glad you like it!
Don Fillenworth I'm in welding at school and I hope I can make somthing luke this
I'm learning how to use my everlast on my own. I'm pretty good at mig welding (my assessment) and want to start learning how to tig weld. I want to give making roses a try soon.
You are a true artist!
Nice one. Some pretty fast hammering there too 😁
yeah, great work as always!
crazy watching someone do this.... learned how to do this in highschool for shop but noone took it to this level, using the same tips and all my teacher taught me
Absolutely beautiful!
Great job! Well done!
You are very skillful in making beautiful iron flowers
Great work!
Awesome work, bravo.
Very awesome! Great videography as well!
Wow! What a fantastic craftsman. Thank you so much for taking your time to make these videos and share your craft with us.
Thank you for your kind words!
amazing
You did a Great Job!
this is freaky, real skilled craftsman , i love it
very nice! I made something very very similar using almost exactly the same technique, but yours turned out a LOT better
Amazing! Think I'll try one myself as an anniversary gift
sheer awesomeness. Thanks for sharing that
Awesome video, such talent.
This is an master piece of art.
Well done, very talented.
Beautiful!
Thanks for sharing this it's amazing to learn new things like this includunf when you want to make metal art you did a amazing job ❤
Omg you are my hero!
I'm looking for that intro song for 5 years now.
Thanks!
Who plays that intro
Very nice work. Keep it up
beautifully done.
this is beautiful and stunning
So beautiful.⚘.ŚLICZNA....
Lovely. ....⚘
You have a magic fingers...⚘
Greatings from Poland 🎄
Beautiful.
Very Nice, Thanks for sharing.
Nice work!
Very impressive!
Great work
Of course, you're the artist. It is indeed a unique point 😀
That's so beautiful
Thats amazing !!!
Looks awesome! After seeing this video I had to make a video of myself making one! Thanks for the inspiration!
Looks awesome in copper!
Wow, skills for sure. 👍
Very, very nice indeed!
Awesome! Thanks so much for sharing!
Appreciate your comment. Thanks!
This is beautiful
That is very beautiful! :D
Great job! Just found your channel, you do some nice work.
Master piece
Very nice... much easier than how I've been doing them!!!!
awesome work sir....
A powerplasma would make this process much more pleasurable. Thanks for sharing your fine work.
amazing,good job.bravoooooooooooo
Wow, I'm impressed. Thanks!
+sebmaster35 You are welcome! Thanks!
Très beau, merci pour le partage!
Nagyon ügyes. Igazi mester.
Amazing!
bellissimo lavoro...bravissimo complimenti
Just. Amazing.
very cool man good job
Wow thankyou for video, amazing
amazing artist
I want a torch for christmas so cool !! 😍
Beautiful
great crafting :)
Love the rose. I subscribed.
+peggyt1243 Glad you like it, welcome to the channel!
I've seen a few of these videos because I want to make one but this is great and weld free
AMAZING!
maravilloso trabajo .
nicely done
Awesome....!!!
...dude
That's like one of the most romantic things ever
very cool!!
Incredible
excellent!!
Magnifique !
This is nice
damm I love your work
perfect nice work
Thanks!
Nice job with building this rose. You just make me happy with this and i have a great plan how to make these roses work like a sort of romantic light with L.E.D light in it ;)
Great idea, go for it!
Nice, nice!!!!!
thanks for the video I made one after watching and it turned out very nice. Is there a way to dip them in something other than oil to stop rust, or to color them
A true craftsman. Any more ?
Mistrz!!!
awesome
Nyt on kova!
Could you use a brazing tourch to work the pedals?
Magnifique
I made one of these in my level 1 welding and metal fabrication class but not as good as this