Fanelli Brothers 3 Car Garage Build Under $3k
HTML-код
- Опубликовано: 15 ноя 2018
- My brother and I built this badass 3 car storage garage this summer/fall. My goal was to do everything ourselves and spend less than $5000. In all, 20x30, it cost just over $3,000 including all materials and expendables. Pretty proud of this thing! #musclecar #garagebuild
fanellirestorations.bigcartel... 
Авто/Мото
Great build guys, and the vehicles are not too shabby as well! I had a post in concrete in the ground for 22 years before it rotted, so piss on the negative Neds. When they do finally go, I’m sure filling the holes and adding concrete brackets would last another 20+. I’m building one this summer and I love your design! So thanks for the start.
Thanks man appreciate it💪🏼 glad that my vid was helpful! Best of luck with yours.
Great video, greatly appreciate the fact that you guys are like most of us out here. A true honest no BS video👍
thanks man!!
Love how you cut out the rafters, so much stronger. Being that, you are in north country, and IF the bottom starts getting weathered. Get that Composite PVC Aztec board 5", and cut the bottom of your T 1-11 all the way around and insert. Water will never get that PVC board. Then just seal between the PVC board and T 1-11. Awesome build Thanks fo sharing.
after notch 2x4 at best
Height would depend on how one wants to use the garage. I like the simplisty of the design here, as it is very functional and serves it purpose. As we look on, perhaps we might see places for improvement in the design, and I am sure there may be things he looks back and might would have done differently. But it is built now and it works. Great job! Would like to see your swing out doors for the garage, that you mentioned you would do. Would like to see more DIY build videos. -Rob
This video just gave me hope and motivation to build mine. I had this similar design in my head but all the contractors that i spoke to were each quoting me over $10-15k, while in my mind i was thinking it shouldn’t be more than 5… This looks like a project potentially for this coming summer. 3k all in sounds really really doable. Thanks for making this look easy man.
I’m glad my video was inspirational to you for wanting to build your own. It’s fun! Remember that I was able to do it for $3000 back when lumber was a little cheaper, this was 2018 but still I’m sure you’ll be able to do it for far less than you were quoted!
Nicely done. Great job
Great video and good job. Have to say a little low at the back imo, but that's your choice obviously. Overall looks good
Great job guys ! You make it look easy...Nice car collection also..Go Mopar!
thank you very much!
Not bad at all! 2 thumbs up.
Thats great brother keep it up
Nice job fellas👍
Thank you!
when you build a garage Nirvana is a requirement. LOL
Bubbles between the lines are always a good start.You notched the roof rafters, great!
But there is alot of potential shear on those beams attached to the 4x4 posts.
Probably should have made a small notch in the vertical post to accept the beam, at least half each on both sides
Lots of weight for anchor bolts.. Just sayin'
I love it man... Any way you can post all material used?
Nice build guys greetings from Downunder
Great vid! Thanks for sharing, this might motivate me do the same..
I dig it fellas
Nice job
thank you!
A job well done
I am sure you guys know what you do. You guys look very skilled
Just for my curiosity as I have never done any major project like yours.
Wouldn’t it be better to nail/attach the post on the concrete instead of concreted all the posts?
Nice mopars
thanks man!
What lengthy are you main post and how deep in the ground are they
May be more videos in the new garage. Good Luck!
Certainly will make more soon!
I agree with sean b that the back is a lil low. but i love the design how tall pillars?
That's how I wanted it. The fronts are 12" rear 7"
Wow! Front 12” (inches) & rear 7” (inches). Must be a garage for Matchbox cars. LMAO. Definitely, should of gone higher in the back but I’m sure you won’t regret it since that’s how you designed it. 😂
Anthony V I am almost certain he meant "feet" instead of "inches". Height would depend on how one wants to use the garage. I like the simplisty of the design here, as it is very functional and serves it purpose. As we look on, perhaps we might see places for improvement in the design, and I am sure there may be things he looks back and might would have done differently. But it is built now and it works. Great job! Would like to see your swing out doors for the garage, that you mentioned you would do. Would like to see more DIY build videos. -Rob
Do you not need to put a moisture barrier under the stone?
"Whaddya say, RAM?"
You may accumulate 200 pounds of snow on the roof. This structure can support a mountain avalanche.
I want that Dodge car
How much did you spend on material?
as I wrote in the description, just over 3k!
small world, looks good. paint and primed?
small world?...
Grüße aus Germany Bro ;-)
BETWEEN 6 MONTHS TO 8 MONTHS BE STARTED ROT YOUR POST OUT / BECAUSE THE POST HAVE TO BREATH WANT ROT
thats what I thought too but what do i know. I found about 15 issues.
3 years later...still no rot, but thanks!
@@sawyerramos3113 wheres the video of your build? oh wait....
@@FanelliRestorations You won't see it. It will be in the heartwood. It will rot from the inside out.
Woodglut has a lot of designs to choose from.
Woodglut is a good solution for every woodworker.
Why would you make the back so low waste of space
your opinion is a waste of space, but thanks for the view!!
If have all that extra height on your 6by6 post why not just build the ceiling higher
Way to low at the back
I'm sure you built yours to perfection, thanks for watching!
Not good! You guys have the rear low enough to bang a short persons head...Why? There is nothing up above in that beautiful sky... 8 ft is just as easy...
not your garage not built for your needs, built for mine. Thanks for watching tho!
👍🏻👍🏻💯💯