home made 10 foot diameter axial flux wind turbine. Grid tied!

Поделиться
HTML-код
  • Опубликовано: 18 дек 2024

Комментарии • 8

  • @windsine
    @windsine 5 часов назад

    for a top end overvoltage protection (and since you already have the classic/batteries there) by manipulating/stepping both power curves, you could use the classic to grab the machine (in parallel with the ginlong) to help protect the input of the ginlong from overvoltage. granted your upper end voltage on ginlong is below the max input of the classic. Just a thought. Good to see that inverter getting some use!

  • @mianqaisar53
    @mianqaisar53 15 часов назад

    Your blades are made with single wood or laminated wood???

  • @dansshop
    @dansshop  14 часов назад

    This is the same turbine through the midnite classic for battery charging. ruclips.net/video/mfWT5tPy7zM/видео.html

  • @mianqaisar53
    @mianqaisar53 15 часов назад

    What is diameter of magnetic plates and stator

    • @dansshop
      @dansshop  15 часов назад

      12 inches and 14 inches respectively. There are other videos of this turbine here on my channel.

    • @mianqaisar53
      @mianqaisar53 15 часов назад

      @dansshop single piece of wood use or multiple pieces of woods joints each other and than make blades

    • @dansshop
      @dansshop  15 часов назад

      @@mianqaisar53 These ones are laminated but they wouldn't need to be!

    • @mianqaisar53
      @mianqaisar53 15 часов назад

      @@dansshop thanks sir