Will it Start? 50 YEAR OLD Lift Needed TODAY !!!
HTML-код
- Опубликовано: 13 май 2024
- In this video shot and edited by Wiley. He stops by to see Mickey and finds him trying to start a lift that's been sitting for years. Will it start and get these hay implements loaded
Lets Find OUT
Thanks For Watching and as always
Remember DontBeWily 
Развлечения
One of the things I love about old diesels is that they can sit for years at a time and still start right up with a little coaxing.
Thats for sure. Sometimes the hardest part is getting where you can put fire to the starter
Thanks for watching
I love those old all terrain forklifts. Good job Wily! Thank you for sharing
Thank you and thanks for watching
Timing, fuel, compression! Works every time!
It does. Hard part most of the time is getting fire to the starter
Wiley epitomizes southern hospitality and really what Americana is all about !!
Thanks for those kind words
Love to watch ya Wiley, I'm born and raised in McDowell County WV, but now in Martinsville Va., but we are the same people, keep on keeping on buddy
Some of us Mountaineers refer to Virginia as the mother ship 😊
I have no doubt about being the same people. Thank you for sharing and watching
Thanks for sharing
That forklift is very very old and take care and God bless
It ran for at least 2 hours maybe three and did what it was supposed to do after sitting back there so ling. I agree it needs to be taken care of and a little maintenance on it which is amazing sure they will do. Thanks for watching
That old tractor runs good👍🍮😎
Yes it does
Would be a handy thing to have around the place. I remember a similar smaller version in the apple orchards that was basically a ford ag tractor turned around with a mast on the back.
What a simple machine. These things were built.
The diesel whisperer strikes gold again 👍🚜😁
Thank you for watching
Unusual looking forklift Wiley, took some time to start it up. That is the oldest forklift i have ever seen. Awesome video Wiley 👍 👍👍👍
Thanks for watching and sharing
Wily, you need one of these as a general tool like your Crescent Wrench. Just pick stuff up and move it so it's easier to work on 😁
Thanks for sharing and watching
Excellent job Wily!! Runs very nice!!!
Thanks 👍
Amazing Willy
Good job🎉
Thank you
Thanks for another great video and Wiley.
It was interesting and entertaining.
That engine is a ford industrial type motor. Quite the old fork lift. Basic machine with basic controls. Sure has got huge extensions on the forks.
Surprised you got it to run plus move and operate. The engine runs real smooth. Believe the engine is a good one. With some TLC and fixing it can be useful yet for some one.
Good job Wiley!!!!’ Another one you got to run and operate.
Thanks Wiley.
The Iowa farm boy. Steve.
I know technology made these things get put in the barn but as far as at a metal fabrication or a mechanics shop you couldn’t beat that. It would run a month on 5 gals if fuel
That is outstanding bush craft, you done it without even cutting down a single bush. Great job Wily.
Lol 😂. Thanks for watching
Once again Wiley you have amazed me with your talent and skill
Thank you sir for sharing this old ford relic coming back to life
Looking forward to seeing your next adventure until then May Gods Blessings be with you and your family always
Thank you for that and thanks for watching
Wiley another successful start!
Thank you and thanks for watching
Awesome video, Wiley. It's a pretty nice forklift, Wiley. I appreciate you, buddy 👍
Thanks and thank you for watching
Amazing start up after setting so long gotta love the old equipment they were built robustly and near bullet proof. Amazing job getting it going..😎🇺🇸👨🔧🚜😇
I agree with you and thanks for watching
Wily to the rescue.
Thanks for watching
Well done team . Thank you Wiley.😅
Thank you
Very nice job and God bless y'all
Thank you
I want that little pontoon boat
I will find out. email me
Another Excellent Video Wiley
Thank you for watching
Excellent video Wiley :) , Jacob :) oldest Forklift was Farmall (McCormick International) model M basic with wide front end not Row crop but was great Grandfather then his 3 boys used in Top second floor on barn my great Uncle Truman farm plus for Slaughter house lift cows or pigs on pulley system 2 Butcher spots ! Then in 1984 was sold Farmall Forklift to a another famillies business at Slaughter House building then 2010 was sold again not sure it to ! But heard $5.000 went for when my Grandfather sold and next family bought sold for $ 3.200 need new tires plus brakes also clutch I heard and after that about ! I remember my great Uncle Arnold my grandfather Haroold middle brother said that Farmall performance very well and did lots hard work in days they had it never had problems with it!
Thank you for sharing this
All right! Those fellas from Mexico are a hard working bunch.
Good , Good people. Heck he bought lunch and i didn’t even have to endure bad jokes 😂. Thanks for watching
@@DontbeWily Can't beat that deal
Good show Wiley, keep it up 👍👍
Thanks 👍
So I was in Wiley TX today and I was wondering if don't be Wiley would post a video today and bam there it is. Great job Wiley.
😂
Like the stars lined up
I'm glad to see the tractor up and running again good job Wily
Thanks 👍
Wiley glad to see it start it sure did put a smile on your face.Thats always good to see.KEEP them videos coming I need my dose of DON'T BE WILY 😂 ,!!
Thank you. Thanks for watching
Whew Wiley too close to the truck ! Great to see it running again and working ! Looks like the fella with the trailer has got a lot of driving to do hope he gets there ok!
It took am minute for the steering to catch up
Well you did a great job! The thing you are able to get it running!
Thank you!
Wiley that thing looks terrible. Hope you get that running.
I feel its pain 😂. Thanks for watching
Hello wily I said it before I will say it again you and my father are one your right with things made simple no bull simple those guys know the equipment they bought will run forever some spit baling wire your set thank you very much you bring me back to yesterday you bring back memories with my father I thank you
Thank you for that.
Yeah, those snakes were coming out of everywhere, Wiley! 😮😮😮🤣😂🤣😂
Nice work.
Thanks!
Awesome video Wiley!!
Thanks
As you were first trying to move it I'm thinking 'there has to be a stuck brake' or worst 'stick axle' because it wasn't even trying to budge. Once that brake was released it was like it was set free and off it went to work!! Maybe could stand a little paint here and there, but it looked to be working pretty well for going straight from nearly abandoned to back to work in such a short time!
I thought to myself there is no way stuck brake would keep it from budging. Just keep working it back and forth my brain was telling me.
You were right Best parking brake ever
You the man thanks!
Thanks for letting me hang around
Nice old tractor F/lift dodgy lookin load a real back roads load as we call em here in Australia 😅😅😅😅
Have a great day Wiley
Kym
Adelaide
Thank you for sharing and watching
good job Wily!
Thank you
DAMN! Just look at that trucks rear axle! I'd be surprised it made it to Mexico without breaking shackles, springs, or something! Wow!
Thanks for watching
Slick running machine
Yes it was. Thanks for watching
Looks like a 256CI Ford industrial motor. Before you start it, give it throttle and mash the button in the stop lever on the injection pump. Looks like the date stamp started with a 2 so, 1972 or 1982.
Thank you for that info.
@@DontbeWily You’re welcome.
I would rather light a candle than curse your darkness friend but one of those battery chainsaws with the twelve inch bar would be perfect for your situations. I saw you toting the Echo with the Mack video and that's a bit much. Nice to see you cranking on the Fortrrss compressor, God bless harbor freight,
Amen on the Harbor Freight. Echo was Mickeys and it was. Thanks for watching and sharing
loving the videos
Thank you
That trucks on the bump stops
She got a "little" tongue weight to her! 😂
Yes it was.
this video was fun to watch cause the cool ans slow happening.
Thank you
Good luck buddy be careful
Thank you, I will
Wiley I think 🤔 you can get it to run 🏃 you have a great day
Thank you and you too
Wiley does it again. Super
Thanks for watching
Love it
Thank you
Nice! If you got fuel and compression she will start! Thank Rudolf Diesel for that!
Thanks for sharing
Awesome
Thanks
Hello Wily. I am kind of wondering if the rollers inside the track may be worn down to the point that once the mast gets to that certain height that they either pop out of track or maybe the mast is that worn. Even So, That machine is still very handy to keep around. That engine sounds amazingly good to have been sitting idle for so long.
I am think your on the right track
no pun intended
I think it definitely worth spending a little money on to use around that shop.
Thanks for watching
ITS A FORD THATS WHY IT STARTED RIGHT UP JD WOULD HAVE NOT! FORD KNOWS HOW TO BUILD THINGS ITS FORD💪💪💪💪💪💪🤟👍 MY BLOOD RUNS BLUE FORD BLUE!
Thanks for watching
All the pickups need to be way way away from equipment that will if start vlogs, that old equipment has no fillings at all about tearing up a pretty pickup, lol😢thanks buddy BigAl California.
Lol 😂. I was wondering if anybody noticed that that lift was on a mission to hit a truck
@@DontbeWilyii. Like. It
That machine was the pre cursor to the modern forklift
Thanks for sharing.
👏👍
Definitely got a death trap rigged up on that trailer
Thank you for your APPRECIATION to your subscribers Wily😅
Always! Thankful to you and other subscribers and viewers
@@DontbeWily I noticed in your outlook just saying
Got Er dun again 😊
👍
moteur Ford
Too bad the Massey Ferguson 165 didn't find a home locally.
Yea. Not sure were they picked that up Thanks for sharing
Ford tractor backwards to me!
Dont worry about the width.
I would think You would need a escort with those loaded flat.
Yeah, those weeds will take over everything!
Yes they will. Thanks for watching
definatly a ford engine!
Thanks for watching
nothing wrong with that fork lift Wily
I agree. Thanks for watching
That looks like a boat lift
One of these days you are going to get someone hurt really bad or killed! This might explain why you are not doing work with Hank
I appreciate your comments. I am in no way responsible for that man doing what he did I did not ask him to He was motioning me on what to do. It was not my equipment or sale. I was helping. You do know Hank cut me with a Chain saw 😂
That was a homemade folk lift machine.
It’s a windham. They once had a facility in Elba where they made them. Not sure they had a dealer network or they just sold them
Not disputing about being home made but they massed produced them
It's ugly but it looks like a good peace of equipment
😂. Me
No you talking about the machine
kinda sound like a 990 david brown motor
Thanks for sharing
Wiley The Desiel Whisperer
Thanks for watching
Yall didn’t bring a chainsaw, Wiley?
I know. I actually didn’t go there to start anything. I was dropping by to see Mickey
New Holland?
🤝👍👍👍😉✌️
Thats a ford industrial diesel. My boss has a forklift with the same engine
Thanks for sharing
DID YOU BUY THIS??
No. Its not for sale They just needed it that day
Wats happening to you and Hamilton
Looks like he replaced Wiley with his granddaughter's?
@@bigbill709 or Wiley replaced him lol
Lol. 😂. Can you blame him.
Thank you for watching Hank and I over the past couple of years. I enjoyed working for him Nothing has happened like a a falling out. I just wanted to do something like we did with my Son Jacob. I thank you for watching. I hope you like the videos.
That truck of there's looks over loaded best stay off speed bumps with that load keep it under 55mph
Thanks for sharing
That's a Detroit
256 Ford.
What would these fellows have done if that old high lift wasn’t there or refused to start. You ain’t man-handling that load! Wiley done his part but the loading and makin it fit on the trailer was their problem to solve. 🥸👍👀✅
I was thinking the sane thing and ask Mickey that very question but the old lift didn’t disappoint
Thanks for watching