No offense to the person who made this video, for the aftermarket Community who is looking to Turbo a beta 1/2 Tiburon-Elantra-accent You need to know that most people who have done it or not going to share that information with you it's a common problem in the car community people are very much like crabs. My advice over the knowledge I've gained is to make a "patch wiring harness" so that whatever ecu you have can be directly plug and play.
If I wanna swap a beta block into my 3rd gen accent, should I go with a CVVT version or no? Should I use the accent's ECU with the beta wiring harness and coil packs?
@@mnightfamalam1510 do the beta 2 with Cvvt out of the 04-06, the crank is forged with 4 more counter weights on the crank then the beta 1 ,with a closed deck iron block drop the compression with a decompression head gasket and you can run 25 psi, and maybe do a hx35 turbo
I’d highly recommend throwing a turbo in a 2.7L V6 Tiburon GT rather than doing it in a 4 cylinder 2.0L. He’d definitely need to dyno that shit consistently, run pistons, cold air intake, and make sure the turbo is not some amazon eBay turbo or else that shit will blowski lol
@@WhiteWaterVisuals you realize that the G4GF is iron right while the v6 is a aluminum body the 4 cylinder can handle more boost than an aluminum block. By the time you hit the limit on the G6BA the 4 cylinder will be past that a stock G4GF/G4GC motor can handle 8-12psi stock. While the G6BA can't even get near that stock.
@@MJT-DAyou right im running on 10psi on stock engine and everything fine for now. You can run 15 psi or more if you have big injectors and a good mapping. Cheers
Hey man, my 2.0 tiburon has like 59k km’s only. I really want a turbo in it, mine has 153/PK/HP right now, instead of 143. But is it worth adding a turbo? I love my car tho but I don’t know what is wise. Like wasting 3k cash on turbo or save up for something else? Thanks!
It's the g4gc and you can take more then 5psi without tune, you need just bigger injectors, i runned at 10psi with mine and the 290cc injectors from the santa fe v6, the afr was not too bad but if you put like 400cc it will be better without mapping
@@RedPill0803 woah didnt realize this was from 2 yrs ago! boosted mine at 5psi via 5th injector. perfect for a daily (plus the sound it makes w/out bov!)
@RedPill0803 what was your AFRs with the Santa fe injectors? I wanna do the same, want to turbo but don't want to go through with the pain fo tuning. 4 to 6 psi max probably because no tune makes me scared to blow it up.
Też Ci wywala rezerwe przy przyspieszaniu :o, nie moge się z tym uporać i ciągle mi źle wskazuje przez to, też tirburon 2,0Turbo. To samo ze wskazówkami obrotomierza.
I find it hilarious that anyone wouldn't. You can get a 4cl 2.0 up to 485bhp Stock is boring. This car is made to be modded. Sadly though... there aren't many parts to be able to do so!
@@KyleBc95 everything is meant to be modded if you want it modded. Have you not seen the late 90s? It’s not hard to throw a little spinny boi on one of these and run 8-10psi. I’m sure the designers of the civic never thought people would do the things they did with the car. What kind of communist thinking is that? Because you don’t think anyone should modify this car that means they shouldn’t? I hope just to spite you that every tib owner mods their car and it’s all you see when you go driving. I have a 13b rotary swap in my s2000, I’m all about thinking outside of the box
Hey I know this is an old video but I’m serious about turboing my 2008 tib gs. If you respond to this I’d love to ask you a couple questions about fitment since not many people have done this🤟🏼
@@MrDzl19 idk if he’s gonna reply but I’ve been doing some research and it seems like nitro is the best bet for a tib if you’re on a budget like me😂 turbos are going to be ALOT of time and money for us
@@MrDzl19 the engine is pretty bulletproof for running low shots. Most of the forums say you can use small shots on a stock block.I’m considering a wet system and going with a 35 shot.
My t.ron.😂.is a 06.g.s. I haven do nothing to him.he is a animal.i took off .from fhily.p.a. my distance was arkansas.an them a went to oklahoma..an from Oklahoma..I took off.back to p.a.today.that is my working car.😂.
Nie powiem że słaby ale ja swojego Volviaka 140 kuni lepiej krynce 🤣🤣🤣 a i jeździłem mocniejszymi co by nie było 😆😆 i szybko jeżdżę, ale mniejsza o to. A to to bydle na dotarciu? Czy co? że tak obrotów unikasz?
@@RedPill0803 unless you are pushing a lot of boost, flutter is harmless. Especially this kind of flutter. Where it’s bad is when you’re around 40psi and the blowoff valve can’t get all the pressure out so it comes back through and surges past the compressor. If you hear what I said, I said so much pressure the blowoff valve can’t keep up.
Woah! Definitely need more videos!!!!
I'm searching for a turbo kit can you tell me where I can find a good one? I got also a Tiburon 2.0 GK 2005
My "07 Golf V 2.0 TDi had a Big turbo with lovely sound
My dream's car.👍👍👌
No offense to the person who made this video, for the aftermarket Community who is looking to Turbo a beta 1/2 Tiburon-Elantra-accent
You need to know that most people who have done it or not going to share that information with you it's a common problem in the car community people are very much like crabs.
My advice over the knowledge I've gained is to make a "patch wiring harness" so that whatever ecu you have can be directly plug and play.
Solid advice
I can give you some advice if you want cause i turbocharged my 2l fl2
I would need some ! I'm trying to Turbocharge mine@@RedPill0803
If I wanna swap a beta block into my 3rd gen accent, should I go with a CVVT version or no? Should I use the accent's ECU with the beta wiring harness and coil packs?
@@mnightfamalam1510 do the beta 2 with Cvvt out of the 04-06, the crank is forged with 4 more counter weights on the crank then the beta 1 ,with a closed deck iron block drop the compression with a decompression head gasket and you can run 25 psi, and maybe do a hx35 turbo
Czerwony najszybszy , Pozdrawiam Bartek :*
Masterpiece!!!!!🦈🦈🦈🦈🦈
Lovely! But what did start to beep and why tho?
Bro is revving on cold💀
What turbo and everything are you rocking??
Have you had any trouble with the engine? What kit did you install? My buddy is wanting to turbo his 2.0
I’d highly recommend throwing a turbo in a 2.7L V6 Tiburon GT rather than doing it in a 4 cylinder 2.0L. He’d definitely need to dyno that shit consistently, run pistons, cold air intake, and make sure the turbo is not some amazon eBay turbo or else that shit will blowski lol
@@WhiteWaterVisuals how is he going to use a CAI if its turbo. most turbo kits just put the filter right outside the turbo
@@WhiteWaterVisuals you realize that the G4GF is iron right while the v6 is a aluminum body the 4 cylinder can handle more boost than an aluminum block. By the time you hit the limit on the G6BA the 4 cylinder will be past that a stock G4GF/G4GC motor can handle 8-12psi stock. While the G6BA can't even get near that stock.
@@MJT-DAyou right im running on 10psi on stock engine and everything fine for now. You can run 15 psi or more if you have big injectors and a good mapping. Cheers
My dad has a Hyundai SE 2002 with a swapped Sti Erx engine with one turbo :P. Oh and your car looks sick
Hey man, my 2.0 tiburon has like 59k km’s only. I really want a turbo in it, mine has 153/PK/HP
right now, instead of 143.
But is it worth adding a turbo? I love my car tho but I don’t know what is wise. Like wasting 3k cash on turbo or save up for something else?
Thanks!
it will cost more then 3k(if u want it to last) more in the range of 5k
Tuned Tiburon oh damn.. haha
this is the G4GF beta engine right? would 5psi boost make a noticeable difference? i plan to boost mine and they can only do 5psi max (w/out tuning)
II thinks it's a G3GC
It's the g4gc and you can take more then 5psi without tune, you need just bigger injectors, i runned at 10psi with mine and the 290cc injectors from the santa fe v6, the afr was not too bad but if you put like 400cc it will be better without mapping
@@RedPill0803 woah didnt realize this was from 2 yrs ago! boosted mine at 5psi via 5th injector. perfect for a daily (plus the sound it makes w/out bov!)
@@tyronepullan6624 oh ok cool 😁 yeah the sound is crazy, love it too
@RedPill0803 what was your AFRs with the Santa fe injectors? I wanna do the same, want to turbo but don't want to go through with the pain fo tuning. 4 to 6 psi max probably because no tune makes me scared to blow it up.
Nice, ive got the coupé gk 2002 2,7 v6 :)
Mam pytanie ile HP wytrzyma silnik od stock Hyundaia
Jakie samochody tym sprzętem zjadasz? Czysta ciekawość.
nie ścigam się, od tego są tory :)
Hi, what turbine was put on the tiburon so that the size fits???
Cześć, jaka turbina została nałożona na Tiburon, aby dopasować rozmiar???
GT3076 :)
I said if he have a turbo.en he is 2.0.that means.that is a build.just like I want my Hyundai 06 Tiburon
Ile kucy ma ten potworek? Pozdrawiam
Bro, what turbo you got in there and where you got it from?
gt3076
what do u think about the gtx3584rs?
which turbo do u recommend me for a stable 250- 300hp at low boost and hopefully max 400hp ultimate goal?
oh yeah forgot to mention my tiburon is the v6 2.7l motor
@@Aplayasworld the V6 tranny can’t take as much HP as the 2.0 believe it or not.
Też Ci wywala rezerwe przy przyspieszaniu :o, nie moge się z tym uporać i ciągle mi źle wskazuje przez to, też tirburon 2,0Turbo. To samo ze wskazówkami obrotomierza.
Problem mam od paru dni, jestem prawie pewny, że to wina zegarów. Jak podmienię na inne to dam znać czy pomogło :)
@@plusminusgarage2707 Dzięki wielkie za odpowiedź! Powodzenia i oby pomogła wymiana. Chodziło Ci o zegary dodatkowe tak?
@@ResorStudio Seryjne :) tylko muszę znaleźć z podobnym przebiegiem
Problem naprawiony, powodem była skacząca iskra z alternatora przy wyższych obrotach (brak osłony na kablu)
sutututu
Stock internals?
nope. Forged pistons and rods
hi there. men what its the size of that steering wheel?
That’ll be a 330mm steering wheel
Is swap turbo or engine modified?
Engine modified
Insta plus_minu_garage
which year model is this
Bk2 2007-09
My apologies it's Fl2, the bk series is for the genesis
2003 year, Hyundia coupe GK
I have a stock one, I find it hilarious that anyone would ever turbo this car lmao
Why?
@@sleestack6455 it's expensive af
I find it hilarious that anyone wouldn't. You can get a 4cl 2.0 up to 485bhp
Stock is boring. This car is made to be modded. Sadly though... there aren't many parts to be able to do so!
@@jamesbythewatercooler17 hyundai elentra engines are not made to be modded
@@KyleBc95 everything is meant to be modded if you want it modded. Have you not seen the late 90s? It’s not hard to throw a little spinny boi on one of these and run 8-10psi. I’m sure the designers of the civic never thought people would do the things they did with the car. What kind of communist thinking is that? Because you don’t think anyone should modify this car that means they shouldn’t? I hope just to spite you that every tib owner mods their car and it’s all you see when you go driving. I have a 13b rotary swap in my s2000, I’m all about thinking outside of the box
is it easy to chnage the steering wheel in this car
Yep, very easy
Hey I know this is an old video but I’m serious about turboing my 2008 tib gs. If you respond to this I’d love to ask you a couple questions about fitment since not many people have done this🤟🏼
Following this, got 06 2.0
@@MrDzl19 idk if he’s gonna reply but I’ve been doing some research and it seems like nitro is the best bet for a tib if you’re on a budget like me😂 turbos are going to be ALOT of time and money for us
@@MrDzl19 the engine is pretty bulletproof for running low shots. Most of the forums say you can use small shots on a stock block.I’m considering a wet system and going with a 35 shot.
@@MrDzl19 if you are seriously mechanically inclined you can find fabricate all the parts. But if it’s your daily then good luck my friend 😂
@@asaporterfield3736 you still have it? Was nitro effective?
Ale zapierdala, mój wymarzony wóz
are you scared to drive the thing?
My t.ron.😂.is a 06.g.s. I haven do nothing to him.he is a animal.i took off .from fhily.p.a. my distance was arkansas.an them a went to oklahoma..an from Oklahoma..I took off.back to p.a.today.that is my working car.😂.
Wkurzajacy dzwiek przy tych biegach, co to za "zacieranie"?
Chodzi Ci o "łutu"?
A żeś pokazał....
A co byś chciał zobaczyć? :)
@@barteksyga3298 juz ja bym Cie nauczył przyspieszania i wyprzedzania hyhy 🤣😁
Dopiero co odebrałem prawko, a Ty takich rzeczy wymagasz 😅
@@barteksyga3298 I to twoja drezyna? To ile ty masz lat? XD to kto to modził? 🤔
Nie powiem że słaby ale ja swojego Volviaka 140 kuni lepiej krynce 🤣🤣🤣 a i jeździłem mocniejszymi co by nie było 😆😆 i szybko jeżdżę, ale mniejsza o to. A to to bydle na dotarciu? Czy co? że tak obrotów unikasz?
Everyone should toss away their BOV in exchange for turbo flutter
It sounds crazy but not very good for the turbo 😅
@@RedPill0803 unless you are pushing a lot of boost, flutter is harmless. Especially this kind of flutter. Where it’s bad is when you’re around 40psi and the blowoff valve can’t get all the pressure out so it comes back through and surges past the compressor. If you hear what I said, I said so much pressure the blowoff valve can’t keep up.
Stock ecu?
ECU Classic
@@plusminusgarage2707 Do you mean EMU Classic ?