Another tip I discovered: hold any point to the right of the middle (use the extreme right point, for example) and Ctrl-drag it upward. This "stretches" the curve upward, applying "proportional" increases to all the points on the curve. If you want, say, 1900 MHz @ 0.975 V, Ctrl-drag the right of the curve upwards and keep checking the 0.975 V point; when it gets to 1900, THEN use the Shift-drag to pull all the other points below it, and apply😉
Got to hand it to you, the "flatten everything after the undervolt point" was a great tip - stops that huge step-down when it bounces off the power limit, if you've got a sharp "knee" in the curve. EDIT - just compared the two techniques and gained 1.4% on Heaven😁 (And to whichever saint in chat told us about the "shift-drag" feature for pulling all the points down, 👏🏻👏🏻👏🏻👏🏻)
He’s not a step by step guy, you have to understand his why’s. Anyways got my 3080ti to 2100 @ 1.025v and got better frames and won’t pass 61c w this method.
How is it not a guide? It literally undervolted it right in front of your eyes. You overclock it with the slider, then open the graph and drag down all the points that are higher than the voltage that you want. That's it
Came back just to say thank you again for your videos Just set my GPU to 1.0 and its definitely about 3-5 degrees Celsius cooler and my fps has been more stable/higher You are the 🐐
Fastest way to make straight line in V/F curve is holding Shift + Left click and drag to highlight the area, select the V/F point that you want and Shift + Enter twice, every point after that become straight line.
My 3080 12Gb was giving me 1860MHz when set to default settings. Ive undervolted and overclocked it now and I'm getting over 100MHz more AND using 30-40W less. Crazy stuff. 1980MHz at 0.9mV with +800 on the memory, rock solid stable in all games and benchmarks I've tested.
Came across this video and thankful I did. Got an ASUS TUF 3080 12gb for $749. Out of the box, boosted to 2010mhz. After some tweaking, I was able to undervolt to 890mv to get 1990mhz. Saved roughly 4ish degrees on temps. Don’t know if I got lucky with my card, but wanted to say thank you. Because of your videos, I’m learning how to do some small stuff on my own. Now I’m a happy subscriber of your channel.
Just to see how far I could push things I undervolted my 3070 all the way down to 725 mv with medium memory oc. Running superposition I managed a score that was 85% of the card's stock config using just 120 watts 55% of the max tdp. I'd probably opt for a undervolt that gets me at least 95% of stock config performance for regular use, but I just think it's wild you can go that extreme with this process.
@@BoboFerre that's not great . . . Silicon lottery can be rough. Try a lower clock I guess. Honestly anything 1755mhz or above offers solid performance, that was the 3070's "official" clock speed. Aim for 1810 mhz and see how low you can go on voltage.
@@BoboFerre ooooohh, that might be why you're crashing, that's a loot of memory overclocking, way to much. I don't overclock the memory more than 200 to 400. I usually leave the memory stock speed.
@@mycelia_ow Well not something i am feeling at all my GPU is doing amazing! 9.0ms at about 90% of my games but the newest game i have is Cities: Skyline 2 and RE4R and both games for me run great at 1440p
Actulally, the best content for OC themed channel in english-speaking youtube. Concentration of useful information per minute in these videos is unmatched.
Your way looks more promising I say this after noticing the change between locked voltage vs unlocked method on Afterburner. Here is a thing these cards are designed to rump up as required and when you put a hard voltage to the GPU your clock stays the same, not even using it so you will end up missing up your GPU in the long run also performance is also tasked (Temp, Response time and 1%low). Thanks for this info.....great content!
My 3080oc tuf is an undervolt god! 1950mhz @9.25mv in the dreaded nzxt h1 fire box. Temps dropped 12c from 61c to 49c! And warzone feels like it has less latency cause my clock speed doesn’t jump around anymore, I ordered B die ram should be here tmrw, I’m hoping to finally get 240fps @1440p on rebirth island. Thanks Jufes!
My 3080 Ti FTW3 still tries to pull 445-455 watts even when undervolted to .0925? Do I just have a hungry GPU? Or am I doing something wrong? The other issue is I can't get over 2000mhz cause it will try to pull well over 450 watts causing it to power limit.. ugh
@Ricky Stelzer .. For straight up undervolting, the way you described is the way too easy way! .. I think he's talking about undervolting + overclocking simutaneously, but I don't know cuz he's more confusing than Chinese Arithmetic with his bouncing back n forth figuring it out as he goes approach. He is entertaining tho, I'll give him that. Lol!
I assuming the clock frequency won’t move. Temps will be in a good spot. and in game performance will go up without any errors, crashes or artifacts etc.
i will try to use this video , i jut bought my aorus 3080 extreme, piece of shit is crashing in games, like random , sometimes every hours, then 3 hours, then in few minutes....
@framechasers so I want to go fully overkill with a setup and upgrade my system. Primarily stream warzone. If you could suggest the partsFor my gaming pc 10900k/5950x? Also motherboard Then which ram for highest frequency with lowest timings? After purchases going to pay for you to optimise it! :)
Yo thx. But still would love to get more info on optimizations! New to pc gaming. Any suggestions on OC basics for Call of Duty. Hardware in pc and game. 🙏
somehow I got the issue, that my cards still goes over 1000mV , although undervolting it to 962mV. What am I doing wrong? After settings the core clock and memory clock and "choosing" my desired voltage it just changes back after i hit the apply-button
Whoaaa....that does save a whole heap of time lmao. I usually run a couple profiles, like 1 thats all out "have all the power GPU", one that'll hit and stick the highest overclock i can reach, Then another that has like a nice relatively high clock but a decent undervolt like this video (shave off some good chunks of power without loosing too many frames) then one i go through maybe the last 5 or 6 steps too maybe 1 or 2 steps below my Max OC, and fiddle with each steps voltage till i can find the lowest point that step will run stable at (some in the sub 1v range). Sorta like max OC on the least amount volts, then its free to bounce around the top clocks and still keep an undervolt
Hello, I have a quick question in fact I would like to put a bios of a (Asus RTX 3070 STRIX GAMING OC) on a (rtx 3070 Aorus Master) it could work or not at all ?
Great video. Previously had 2070 Super Now have my 3080ti at Max Power & Temp 0.95v + 115 core clock (crash was at 123) + 750 memory clock GPU Clock 1980 hz Memory Clock 1281.5 1 hour run time Warzone Max all settings except ray tracing GPU-Z: Max temp hit 76.6 C GPU load 99%. Power draw 404W, TDP 101%. Warzone stable FPS 155-169 on max settings. 240fps monitor. Consult was great decision - do it.
Is it worth testing let‘s say every .05 V step below the maximum voltage and maxing that out for even higher clock speeds when hitting the power limit?
I always find a way to increase 1% lows in Intel CPUs by undervolting them through Throttlestop or increase single thread speed. MSI Afterburner's voltage curve is kinda tedious to tune.
Yeah, I have to use a 6.5 version of Intel Extreme Tuning Utility, cause they locked Voltage changes sometime after that, but now I'm able to change voltage on my 10400. I dropped it 0.090 Volts and got a bit better performance on the CPU, but a bit less on the GPU. I was trying to do the same with the GPU, but this, and other things, make tuning the GPU way harder. NVIDIA needs to act like AMD, and make a better App, but I don't think they care about their consumers in that way. They just want you to buy, and not tune things.
How's the dancing MJ's working out for you? Did it increase your subscribers on twitch? lol I remember you said you were trying it as an experiment a few weeks ago.
Lol you'd be surprised what youtubers do in order to add things to tags. Like having a coffee cup so they can add coffee into the tags and youtube can't strike them for lying in the tags
i watched every video of yours trying to reach 200 Fps i tried literally everything even tho i own 3090 and 10850k cpu i barely pass 150 fps on the lowest settings
I've been doing this currently as I just got a 3080ti. What I've been doing is what he showed in this video. I learned it somewhere else but same thing. When I did a normal overclock by just putting a number into afterburner i was able to get around +85-90. Didn't get into testing it because I learned about the curve. On the curve with +85 the my GPU hits 2005mhz at 1018mv. Been messing with this stuff since I got the GPU and i managed to get 2010mhz at 987mv. Stable on everything. Been trying to add more little segments to the OC with and undervolt but as soon as I put in another OC with an undervolt in the curve i crash. Let's say i got 2010 @ 987mv. Then I know I can hit 1950mh with 937mv but when I put that into the curve as well as the 2010 OC higher on the curve it crashes. I would also say to undervolt your "idle" clock. My idle clock is 1755 which would run at 912mv stock. Have gotten down to 787mv 100% stable. Haven't really gone lower as I crashed once on Netflix at around 750 something and just went back to the voltage i knew worked
I love this, got my RTX 3090 Gaming X Trio at 0.9 1860mhz @ around 300w but everything turns to shit with Quake 2 RTX where i can only manage 1785mhz 0.8v and still hits power limit @380w.
@@KonDim Yep 0.875 is what i was using but decided to play is safe for max stability and set to .9 At 0.9v 1905mhz stable on games like forza horizon 4 and assassin's creed odyssey but anything ray trace like control and i hit power limit and bounces all over the place. 380w on the trio is just not enough for much over 1800mhz stable on rtx games unfortunately. Can i ask what you can hold stable on your strix with max 480 power limit and undervolt when pushed?....would love to know if the extra 100w matters a lot.
RT cores are separate units with their own power draw, so when the heavy RT utilizing game is ran - it starts drawing power for their needs as well, leaving lesser power left for the regular cores.
You make some pretty cool movies. I wonder if the AE-9 creative sound card has an impact on FPS. Do you have your own opinion on this? Have you ever tested? Sorry my language is google translator.
why dont u do -200 on the core then open uv hart pick which mv u want say 925 then click one dot and raise it up to 2000 mhrz and it do 1850 or raise it to 2100 it will do 1900 or might crash but u go from there not his way
Another tip I discovered: hold any point to the right of the middle (use the extreme right point, for example) and Ctrl-drag it upward. This "stretches" the curve upward, applying "proportional" increases to all the points on the curve.
If you want, say, 1900 MHz @ 0.975 V, Ctrl-drag the right of the curve upwards and keep checking the 0.975 V point; when it gets to 1900, THEN use the Shift-drag to pull all the other points below it, and apply😉
Got to hand it to you, the "flatten everything after the undervolt point" was a great tip - stops that huge step-down when it bounces off the power limit, if you've got a sharp "knee" in the curve.
EDIT - just compared the two techniques and gained 1.4% on Heaven😁
(And to whichever saint in chat told us about the "shift-drag" feature for pulling all the points down, 👏🏻👏🏻👏🏻👏🏻)
How is this even close to a guide?
He’s not a step by step guy, you have to understand his why’s. Anyways got my 3080ti to 2100 @ 1.025v and got better frames and won’t pass 61c w this method.
@@GARZA_ICMG mine is 3070ti and I get 1980mhz and don’t pass 60c is that good?
@@SRYTGames yeah you can probably push it to 2070 or 2055 even
@@GARZA_ICMG ill try
How is it not a guide? It literally undervolted it right in front of your eyes. You overclock it with the slider, then open the graph and drag down all the points that are higher than the voltage that you want. That's it
Came back just to say thank you again for your videos
Just set my GPU to 1.0 and its definitely about 3-5 degrees Celsius cooler and my fps has been more stable/higher
You are the 🐐
This video came literally on the day I wanted to learn how to undervolt. Saved me 5-7°C Thanks Jufes!
Helped me to !!
Shift + Left clik ( hold ) to make selection, then Shift + Enter to enter value in mhz.
Fastest way to make straight line in V/F curve is holding Shift + Left click and drag to highlight the area, select the V/F point that you want and Shift + Enter twice, every point after that become straight line.
Already explained in the end of the video, someone in twitch chat helped him out.
God bless you.
Best undervolt video I’ve ever seen!
My 3080 12Gb was giving me 1860MHz when set to default settings. Ive undervolted and overclocked it now and I'm getting over 100MHz more AND using 30-40W less. Crazy stuff. 1980MHz at 0.9mV with +800 on the memory, rock solid stable in all games and benchmarks I've tested.
I watched about every video of yours! love them! your on the write path people need to watch more of your videos very informative and important!.
Came across this video and thankful I did. Got an ASUS TUF 3080 12gb for $749.
Out of the box, boosted to 2010mhz.
After some tweaking, I was able to undervolt to 890mv to get 1990mhz. Saved roughly 4ish degrees on temps.
Don’t know if I got lucky with my card, but wanted to say thank you. Because of your videos, I’m learning how to do some small stuff on my own. Now I’m a happy subscriber of your channel.
Just built my first PC yesterday with an EVGA 3070 Ti and you just saved me a whole lot of heat lol, thank you so much King!
how?
Just to see how far I could push things I undervolted my 3070 all the way down to 725 mv with medium memory oc. Running superposition I managed a score that was 85% of the card's stock config using just 120 watts 55% of the max tdp. I'd probably opt for a undervolt that gets me at least 95% of stock config performance for regular use, but I just think it's wild you can go that extreme with this process.
Cool i-ve been wondering how low the 3070 can go, thank you.
My 3070 already crashes at 1900mhz at 900 mv 😭
@@BoboFerre that's not great . . . Silicon lottery can be rough. Try a lower clock I guess. Honestly anything 1755mhz or above offers solid performance, that was the 3070's "official" clock speed. Aim for 1810 mhz and see how low you can go on voltage.
@@Orain88 i am running 1850 at 900mv and memory oc of 1220 something
@@BoboFerre ooooohh, that might be why you're crashing, that's a loot of memory overclocking, way to much. I don't overclock the memory more than 200 to 400. I usually leave the memory stock speed.
I made my GTX 1080 TI ASUS ROG STRIX be nice and stable at 1950mhz at 925mv 55c with low Fan speed. Thx for sharing this wisdom! DK
If only you could fix the latency problem your card has with a lot of AAA titles.
@@mycelia_ow Well not something i am feeling at all my GPU is doing amazing! 9.0ms at about 90% of my games but the newest game i have is Cities: Skyline 2 and RE4R and both games for me run great at 1440p
Actulally, the best content for OC themed channel in english-speaking youtube. Concentration of useful information per minute in these videos is unmatched.
Your way looks more promising I say this after noticing the change between locked voltage vs unlocked method on Afterburner. Here is a thing these cards are designed to rump up as required and when you put a hard voltage to the GPU your clock stays the same, not even using it so you will end up missing up your GPU in the long run also performance is also tasked (Temp, Response time and 1%low).
Thanks for this info.....great content!
Ahaha, learning something new in front of an audience .. priceless :-)
all that youtube stuff! Sharing with friends. undervolt and OC at the same time is the way.
My 3080oc tuf is an undervolt god! 1950mhz @9.25mv in the dreaded nzxt h1 fire box. Temps dropped 12c from 61c to 49c! And warzone feels like it has less latency cause my clock speed doesn’t jump around anymore, I ordered B die ram should be here tmrw, I’m hoping to finally get 240fps @1440p on rebirth island. Thanks Jufes!
I just did 875mv at 1850mhz with my rtx3060, this is awesome i got -8°C and +2%performance in games
What is the point of shunt modding your graphics card
My guy you had me dying at 15:17!!!! Keep up the great videos man.
Dude I just undervolted and ocd my 6800xt last night. ISH OP asf.We got a new driver over on amd last night. ISH IS INSANE
Dont say the Lords name in vain
I have issues with zotac 3090 Trinity OC I try so many things and nothing working correctly
Can somebody help 😅
My 3080 Ti FTW3 still tries to pull 445-455 watts even when undervolted to .0925? Do I just have a hungry GPU? Or am I doing something wrong?
The other issue is I can't get over 2000mhz cause it will try to pull well over 450 watts causing it to power limit.. ugh
I saved 10 C by undervolting mother of god!
Why do some people put -250 in the mhz and then move up one dot let’s say 900v and move it up to 1920mhz
@Ricky Stelzer .. For straight up undervolting, the way you described is the way too easy way! .. I think he's talking about undervolting + overclocking simutaneously, but I don't know cuz he's more confusing than Chinese Arithmetic with his bouncing back n forth figuring it out as he goes approach. He is entertaining tho, I'll give him that. Lol!
What does he mean by “find the voltage where it’s stable” how does one gauge this?
I assuming the clock frequency won’t move. Temps will be in a good spot. and in game performance will go up without any errors, crashes or artifacts etc.
Thanks man i have 3060ti limit 200w and core clock go up down like carzy now stable core clock and only use 170w 👍🏽👍🏽👍🏽
i will try to use this video , i jut bought my aorus 3080 extreme, piece of shit is crashing in games, like random , sometimes every hours, then 3 hours, then in few minutes....
Thank you Jufes! Quality content as always
Names his channel Frame Chasers and forgets to check FPS, i shake my head sir xD
@framechasers so I want to go fully overkill with a setup and upgrade my system. Primarily stream warzone. If you could suggest the partsFor my gaming pc 10900k/5950x? Also motherboard Then which ram for highest frequency with lowest timings? After purchases going to pay for you to optimise it! :)
Best to just buy a consult so I can guide you through the entire process from start to finish, consult isn’t just optimization, it’s everything
@@FrameChasers so once paid for it if there was like game updates or something happened which tanked FPS after optimisation would you assist with that
@@Rhomzy it’s not a lifetime tech support service contract, that would be impossible and not worth 500$. That’s what the discord 20$ sub is for
How come when i move down all the nodes then press apply it just goes back to stock curve it doesnt make the straight line
Yo thx. But still would love to get more info on optimizations! New to pc gaming. Any suggestions on OC basics for Call of Duty. Hardware in pc and game. 🙏
somehow I got the issue, that my cards still goes over 1000mV , although undervolting it to 962mV. What am I doing wrong? After settings the core clock and memory clock and "choosing" my desired voltage it just changes back after i hit the apply-button
You are over estimating the power savings in your graph, lowering voltage by 10% does not save 17% power
slider max freq, then put dots down after volt you want simple 100%
Whoaaa....that does save a whole heap of time lmao. I usually run a couple profiles, like 1 thats all out "have all the power GPU", one that'll hit and stick the highest overclock i can reach, Then another that has like a nice relatively high clock but a decent undervolt like this video (shave off some good chunks of power without loosing too many frames) then one i go through maybe the last 5 or 6 steps too maybe 1 or 2 steps below my Max OC, and fiddle with each steps voltage till i can find the lowest point that step will run stable at (some in the sub 1v range). Sorta like max OC on the least amount volts, then its free to bounce around the top clocks and still keep an undervolt
Hello, I have a quick question in fact I would like to put a bios of a (Asus RTX 3070
STRIX GAMING OC)
on a (rtx 3070 Aorus Master) it could work or not at all ?
Great video! thank man 👍
easiest way: build custom cooling and use the voltage for higher clocks :)
T1pch3 - Yeah pretty sure he’s sharing for those of us that don’t have all those capabilities to build a custom cooler etc. Guess I’m a peasant. 😂
I just do like you buy chepest rtx 4090 tuf non oc and flach Strix Bios and water card is a monster
nice work man keep up the good work!
Great video. Previously had 2070 Super
Now have my 3080ti at
Max Power & Temp
0.95v
+ 115 core clock (crash was at 123)
+ 750 memory clock
GPU Clock 1980 hz
Memory Clock 1281.5
1 hour run time Warzone Max all settings except ray tracing
GPU-Z: Max temp hit 76.6 C
GPU load 99%.
Power draw 404W, TDP 101%.
Warzone stable FPS 155-169 on max settings. 240fps monitor. Consult was great decision - do it.
where can i find what warzone settings he's using? The graphics settings..
Thought it wasn’t maxed gpu load because low latency mode drops it so it doesn’t cap out
Super helpful guide, thanks dude!
great video, one of these days I need to do this.
Is it worth testing let‘s say every .05 V step below the maximum voltage and maxing that out for even higher clock speeds when hitting the power limit?
Anyone knows if the old Gtx 970 4 GB support downvolt feature on MSI afterburner? Thanks 😉
When I click apply after pulling them
Down it goes back up how do I stop that
They're supposed to go back up
I always find a way to increase 1% lows in Intel CPUs by undervolting them through Throttlestop or increase single thread speed.
MSI Afterburner's voltage curve is kinda tedious to tune.
Yeah, I have to use a 6.5 version of Intel Extreme Tuning Utility, cause they locked Voltage changes sometime after that, but now I'm able to change voltage on my 10400. I dropped it 0.090 Volts and got a bit better performance on the CPU, but a bit less on the GPU. I was trying to do the same with the GPU, but this, and other things, make tuning the GPU way harder. NVIDIA needs to act like AMD, and make a better App, but I don't think they care about their consumers in that way. They just want you to buy, and not tune things.
Dude is a lil toxic but glad he appeased the chat and show why not to do it
Cold War zombies is crashing whenever I get to later rounds. Does anybody know why? I have a 5950x with a 6900xt.
cod in general doesnt like much overclocking
I love the vid.
How's the dancing MJ's working out for you? Did it increase your subscribers on twitch? lol I remember you said you were trying it as an experiment a few weeks ago.
Lol you'd be surprised what youtubers do in order to add things to tags. Like having a coffee cup so they can add coffee into the tags and youtube can't strike them for lying in the tags
looking forward to twitch tonight!
Wnat is that a 3080 or 3090 graphic cards?
this would be good for blower cards like my 2080 ti
i watched every video of yours trying to reach 200 Fps i tried literally everything even tho i own 3090 and 10850k cpu i barely pass 150 fps on the lowest settings
can you still overclock your GPU if you undervault it?
I've been doing this currently as I just got a 3080ti. What I've been doing is what he showed in this video. I learned it somewhere else but same thing. When I did a normal overclock by just putting a number into afterburner i was able to get around +85-90. Didn't get into testing it because I learned about the curve. On the curve with +85 the my GPU hits 2005mhz at 1018mv. Been messing with this stuff since I got the GPU and i managed to get 2010mhz at 987mv. Stable on everything. Been trying to add more little segments to the OC with and undervolt but as soon as I put in another OC with an undervolt in the curve i crash. Let's say i got 2010 @ 987mv. Then I know I can hit 1950mh with 937mv but when I put that into the curve as well as the 2010 OC higher on the curve it crashes. I would also say to undervolt your "idle" clock. My idle clock is 1755 which would run at 912mv stock. Have gotten down to 787mv 100% stable. Haven't really gone lower as I crashed once on Netflix at around 750 something and just went back to the voltage i knew worked
I love this, got my RTX 3090 Gaming X Trio at 0.9 1860mhz @ around 300w but everything turns to shit with Quake 2 RTX where i can only manage 1785mhz 0.8v and still hits power limit @380w.
u mean 0.8 v
@@KonDim oops! yep fixed that thanks...cooling on the trio is good but not that good lol
i run 1860mhz at 0.875v on asus strix 3090 oc
@@KonDim Yep 0.875 is what i was using but decided to play is safe for max stability and set to .9
At 0.9v 1905mhz stable on games like forza horizon 4 and assassin's creed odyssey but anything ray trace like control and i hit power limit and bounces all over the place.
380w on the trio is just not enough for much over 1800mhz stable on rtx games unfortunately.
Can i ask what you can hold stable on your strix with max 480 power limit and undervolt when pushed?....would love to know if the extra 100w matters a lot.
RT cores are separate units with their own power draw, so when the heavy RT utilizing game is ran - it starts drawing power for their needs as well, leaving lesser power left for the regular cores.
Power scales quadratically with voltage - there is a tl:dr fo ya :p
How do you see watts like that
You make some pretty cool movies. I wonder if the AE-9 creative sound card has an impact on FPS. Do you have your own opinion on this? Have you ever tested?
Sorry my language is google translator.
why dont u do -200 on the core then open uv hart pick which mv u want say 925 then click one dot and raise it up to 2000 mhrz and it do 1850 or raise it to 2100 it will do 1900 or might crash but u go from there not his way
Essseeeoooohhh stuff
The default curve make my gpu push to 1750mhz st full charge but the boost clock is 1581 mhz… IT’S THE DEFAULT SETTINGS !!!
I've literally been trying to find out how to do that for 2 years
Compolsery comment made.
Also I am an 8 year old I want that extra 3-5fps hehe
16:51 I can’t tell you how many times I’ve tried this and it didn’t work …. Thanks undamaged lol xoxoxo real talk
Does ram matter for warzone fps?
Whats ur recommended ram mhz to get higher fps?
Thx for the tips, but it still soo fucking stupide to pay soo much for a fucking card and have to do this...
Overclocking is so useless these days i always undervolt
Bro this guys didn't even explain anything
17 minutes with ~ 90 seconds of information :(
Dont say the Lords name in vain
Dont say the lords name in vain
Il do what I want
Frame Chasers absolute gigachad