Krytac M4 Magazine. Review, hints and tips.

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 60

  • @ManiaAirsoft
    @ManiaAirsoft  3 года назад +1

    Hi guys. Welcome to my channel please feel free to leave a comment below. All comments will be replied to. The only thing I ask is you be respectful to each other. We all have a common interest in the game and lifestyle of Airsoft. So stay safe and bring on the Booom

  • @juhavahatiitto4325
    @juhavahatiitto4325 Год назад +2

    Damm nice tips! 👍👍👌🏻👌🏻 nice vid 💪

  • @ShatterSoft
    @ShatterSoft 4 года назад +6

    Great tips would be very helpful to anyone who uses those mags well done

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад +1

      Green Squirrel Airsoft thanks bro

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад +1

      Green Squirrel Airsoft I’m sure it will help someone......

  • @MrRoyalbeers
    @MrRoyalbeers 6 месяцев назад

    I just put a thick piece of paper at the bottom of my mags. Great tips.

  • @paulmccoy6492
    @paulmccoy6492 4 года назад +3

    Good stuff man I like the video .. the mags look brill

  • @carlosdelfin22
    @carlosdelfin22 4 года назад +3

    Thanks bro, really good review, I like those magazines

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад

      Thanks I’m glad you enjoyed the review

  • @jessiewasson584
    @jessiewasson584 Год назад +1

    Was that gun AEG? It sounded really nice

    • @ManiaAirsoft
      @ManiaAirsoft  Год назад

      Hay bro. It’s a G&G Wild Hogg 10inch

  • @hazipaul48
    @hazipaul48 11 месяцев назад +1

    Nice tips for great mags. instead of an O ring I’ve used electrical tape with a pice of thick paper sticked to it. Great video. Thanks

    • @ManiaAirsoft
      @ManiaAirsoft  11 месяцев назад

      Glad you found it helpful

  • @Terminatorbart
    @Terminatorbart 4 года назад +5

    Nice mag, great mods!

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад +1

      Terminatorbart thanks I hope it helps

  • @georgebond1873
    @georgebond1873 2 года назад +3

    Hey mate. Great review. Looking at these mid caps for my 12" wildhog as I have has some feeding issues with other mid caps. How does it perform with your Wildhog? Is there any wiggle room in the mag well? or feeding issues?

    • @ManiaAirsoft
      @ManiaAirsoft  2 года назад

      If you do what I did in this video you will have no problems at all

    • @georgebond1873
      @georgebond1873 2 года назад +1

      @@ManiaAirsoft so did you have feeding problems before you made these mods?

    • @ManiaAirsoft
      @ManiaAirsoft  2 года назад

      I had some problems with feeding, but after the mods every mag fed 100% and had no problems after that

  • @ace.infantry
    @ace.infantry 2 года назад +1

    veryy goodddd i love this infos

    • @ManiaAirsoft
      @ManiaAirsoft  2 года назад

      Good I hope ya put it to good use

  • @felipeduarte1997
    @felipeduarte1997 Год назад +2

    Nice video!! Nice Review!! I love the side window to see if its actually full!! I did count my bbs aswell on my mags and it really holds exactly 150 bbs. The window come in clutch because sometimes I got a stutter(the bbs wont go in as easily) when its about 80% full and I stop there without knowing the mag isn't full HAHAHAHA About the oring, what I did on my mags was a little more workfull but it permited removing the cap without the struggle you get with the oring!! I simply cut with a blade 4 pieces of insulating tape (the black one you get on electrical store) and put them together (making a "4 stack" or a "4 layer" tape, you name it...) and cut the "hole" in form of an arrow so the orange lock pass by it and them put them on the bottom of the inner mag!! Worked flawlessly!!

    • @ManiaAirsoft
      @ManiaAirsoft  Год назад +3

      Thanks bro. I’m glad you found the video helpful.

  • @michaelmccr3294
    @michaelmccr3294 Год назад +1

    Ahh dotn get me wrong they look brilliant however.... why didn't they put a thread in the clear bottom case and a hole for a screw to hold the case in place like??

    • @ManiaAirsoft
      @ManiaAirsoft  Год назад

      If airsoft was easy, every one would be doing it…….. 🤣🤣🤣 yeah your dead right. The Krytac mags work in a lot of stuff with out my mag mod on the bottom. But with this quick fix the mags work in a lot more rifles.

    • @michaelmccr3294
      @michaelmccr3294 Год назад +1

      @@ManiaAirsoft me personally I would take my hex kubai m4 mag pin and make drill hole same size down the bottom either on the left or right to hold it in properly

  • @rcm7027
    @rcm7027 4 года назад +1

    Nice review! What brand / type of speed loader are you using?

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад +1

      It’s a hand crank M4 speed loader. Holds 1000 BB’s and I got it on AliExpress for about €13 or €15....... it’s a great speed loader, was a non branded loader. I hope that helps....

    • @rcm7027
      @rcm7027 4 года назад

      @@ManiaAirsoft I was wondering since I've seen so many but don't know who would be the best quality... yours looks good so I'll order one from there!

  • @ernstmeijer3067
    @ernstmeijer3067 4 года назад +1

    Great tips.What size o ring do u use.and size drill.?

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад +1

      I’m just in work at the min. But when I get home I’ll have a look and get ya the sizes ok bro....

    • @ernstmeijer3067
      @ernstmeijer3067 4 года назад +1

      Any size indication for the orings and dril ??

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад +1

      Hi Ernst. The drill hole size is a 8mm hole and the O-ring is a 1.5mm thick o-ring and the size is a little bigger than a 5cent coin. I know it’s not the best of sizes but the important one is the thickness of the rubber ring. I hope that helps

  • @headhuntersniper8433
    @headhuntersniper8433 4 года назад +2

    Good review bud

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад +1

      HeadHunter Sniper irish airsofter just passing on the knowledge to maybe help someone that could do with some help

  • @SemiAutoAirsoft
    @SemiAutoAirsoft 2 года назад +1

    Have you ever had feeding issues with thes mags I have brand new mags with my brand new mk2 crb and has feeding issues tried them in 3 other rifs and still miss feeding

    • @ManiaAirsoft
      @ManiaAirsoft  2 года назад +2

      Did you try the mod that I did with the mags……..??? I have tried them mags in a APS M4, a G&G Wild Hogg, Arcturus Ar15 CQB, CYMA M4 and in my MTW as well and they all fed flawlessly.

    • @SemiAutoAirsoft
      @SemiAutoAirsoft 2 года назад +1

      @@ManiaAirsoft I figured out it was the bbs I was using somehow they don’t like vorsk .28 my .28 devil blasters feed without issues

    • @ManiaAirsoft
      @ManiaAirsoft  2 года назад

      Yes some BB’s are better than others….. I use BLS BB’s and I have never had any problems or Swiss Arms BB’s they feed flawlessly as well.

  • @HughJC
    @HughJC 4 года назад +2

    NICE review

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад

      HUGH JC thanks Hugh it was my very first review and first take as well. I hope you found it helpful

  • @stepbro2119
    @stepbro2119 3 года назад +2

    Does it work in a cybergun m4 hornet

    • @ManiaAirsoft
      @ManiaAirsoft  3 года назад +1

      If you on about the Krytac mags I’m sorry I don’t know

    • @stepbro2119
      @stepbro2119 3 года назад +1

      @@ManiaAirsoft Ok thanks

  • @ernstmeijer3067
    @ernstmeijer3067 4 года назад +1

    Thanks dor the Info

  • @Nikl1337
    @Nikl1337 3 года назад +1

    what quickloader did you use?

    • @ManiaAirsoft
      @ManiaAirsoft  3 года назад

      It’s just a winding speed loader I got on AliExpress

  • @Taylormane
    @Taylormane 3 года назад +1

    Can these do 40 or 50 rps?

    • @ManiaAirsoft
      @ManiaAirsoft  3 года назад

      That is one thing I did not test for sorry and I don’t have a crono so I have no way of testing that. Sorry

    • @Taylormane
      @Taylormane 3 года назад +1

      @@ManiaAirsoft it's okay now worries! Still a great review I bought a couple

  • @ajjamora847
    @ajjamora847 4 года назад +1

    Is this fit on T10 Ronin KWA?

    • @ManiaAirsoft
      @ManiaAirsoft  4 года назад

      Hi bro. I’m not sure to be honest. Maybe ask a dealer that is selling them