you guys weren't kidding. It really does install easy. I just put one in a '17 push to start, the blue plug arrived plugged together but i unplugged them as you said in the video, still don't know what it does. Once i knew where the wires went, it really was 5 minutes. If I had to do it again, I could probably do it in 2-3 minutes. Starting from remote is easy. but shutting off never seems to be the same way twice from the remote. I press lock twice, nothing happens, or the horn beeps. So i wait, try it again, then it works and shuts off, Next time, it doesn't shut off. Holding lock button seems to do something but not sure. I guess if all else fails it will shut itself off in 15 minutes, but maybe with some practice i will get the shut off part working. The starting method works fine every time though. Nice work guys.Can anyone explain what the blue plug is for, and the DIP switch settings? Not really important i guess, just curious.
Can you explain what the black and red pin (switches) do also what is the blue conector that is disconnected, also I assume the little wire (long single wire on harness that's tied together) is the remote wire.. do you recommend using it up in to the dash or up the door brace
Hi, i followed the instruction on PDF and I didn't disconnect the blue connector and the device worker with no problem So do i have to disconnect it or not ?
Hi! If everything is working fine without disconnecting the blue connector, you can leave it as it is. For most models, it's perfectly fine. Glad to hear it's working smoothly for you!
I have multiple questions I hope you can answer. What are the blue pins for? Can it be programmed to start the AC as well? Do you have shipping to middle east/ Iraq? Thank you
So the car remains locked after the remote start until you actually come near the car with the key yes?. OK - will this module work on the European version of Sportage with 1.7 CRDi diesel engine and manual transmission?
I have one issue. This device starts beeping by itself irregulary. I mean, when Im driving sometimes it`s beeping. When I had start investigate and touch device, it`s start beeping 3 times or every time when i touch. May you please advise me. Maybe there is some small battary and it is informing me to change or there are connections not tight. Thank you so much.
Trying disconnecting everything and connecting back together. It might just be one of the connectors is loose. If that's not the case, contact via email support@mykeypremium.com and they will replace it for you.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
you guys weren't kidding. It really does install easy. I just put one in a '17 push to start, the blue plug arrived plugged together but i unplugged them as you said in the video, still don't know what it does.
Once i knew where the wires went, it really was 5 minutes. If I had to do it again, I could probably do it in 2-3 minutes.
Starting from remote is easy. but shutting off never seems to be the same way twice from the remote. I press lock twice, nothing happens, or the horn beeps. So i wait, try it again, then it works and shuts off, Next time, it doesn't shut off. Holding lock button seems to do something but not sure. I guess if all else fails it will shut itself off in 15 minutes, but maybe with some practice i will get the shut off part working. The starting method works fine every time though.
Nice work guys.Can anyone explain what the blue plug is for, and the DIP switch settings? Not really important i guess, just curious.
Can you explain what the black and red pin (switches) do also what is the blue conector that is disconnected, also I assume the little wire (long single wire on harness that's tied together) is the remote wire.. do you recommend using it up in to the dash or up the door brace
I would love to install this on a 2020 kia seltos. Ithis similar to a sportage? is there an alarm function on this?
Is this module comes with it`s keys or it works from original car keys?
It syncs with your original Key Fob
Does it come with an app?
Sorry for the delay! The app is currently still in the development stage and is not available at the moment.
My kia sportage is 2013 and has push start. Will it work? I cant access the panel this easy. Maybe different?
Hi, i followed the instruction on PDF and I didn't disconnect the blue connector and the device worker with no problem
So do i have to disconnect it or not ?
Hi! If everything is working fine without disconnecting the blue connector, you can leave it as it is. For most models, it's perfectly fine. Glad to hear it's working smoothly for you!
I have multiple questions I hope you can answer. What are the blue pins for? Can it be programmed to start the AC as well? Do you have shipping to middle east/ Iraq? Thank you
We can ship it to Iraq. Car memorizes last drive settings. So if you leave the air conditioner ON/ it will work after remote start
Will this work for the kia Sportage 2021 ?
Yes, 2021 still has the same body.
So the car remains locked after the remote start until you actually come near the car with the key yes?. OK - will this module work on the European version of Sportage with 1.7 CRDi diesel engine and manual transmission?
yes our module works with eu versions. car stay locked and engine automatically shut down after 10-15 minutes
Will it work on a 2007 Sportage EX V6?
It only works with push button start system.
@@MykeyPremium Thank you.
Can it work on a 2021 ?
100%
Does it matter if the car is push to start or not?
yes, still. we already made one for key ignition. Just need to test it
@@MykeyPremium do you have remote starter for key ignition?
Is there a problem if I connect the wires in a different order or the power first?
It wouldn't matter in which order the connectors are connected, as long as you connect the power last.
I have one issue. This device starts beeping by itself irregulary. I mean, when Im driving sometimes it`s beeping. When I had start investigate and touch device, it`s start beeping 3 times or every time when i touch. May you please advise me. Maybe there is some small battary and it is informing me to change or there are connections not tight. Thank you so much.
Trying disconnecting everything and connecting back together. It might just be one of the connectors is loose.
If that's not the case, contact via email support@mykeypremium.com and they will replace it for you.
@@MykeyPremium thank you so much for your quick response!
My 3 plugs have a guard around them...
This metal guard is only found in Canadian models, unfortunately.
Is there instructions on how to remove the guard ?