Super underrated content. Period. Immediately subscribed. I’m always looking for goped/high performance small engine content. I am extremely excited for the engine build video, I’ve never seen a performance engine like that been built on RUclips. Cheers, mate!
Fuckin dope! I'm part of a large motorcycle channel Blockheadmoto... I find it amazing how these gopeds got me into where I am today . 2 Harleys deep and guess what? Im buying every Goped I can get my hands on for a reasonable price . Just had a friend of mine go pick up an early Super Bigfoot in Rancho Cucamonga California and ship it to me here in Orlando haha .. I freakin love these things .. A Riot and Trail ripper are on my list. keep it up bud, maybe Gopeds can make a serious come back!! SUBSCRIBED .
@@aaronpratt89 figured you may be into pitbikes cuz thats what bbr specifically makes. Pitbike parts and nasty pitbikes. I like gopeds too but obviously bbr has nothing to do with them. Brapp
@@JesseK410 yea I used to be big into lot bikes! Sold them all, and now they are making a come back lol I’ve been messing with Goped’s for about 20 years now lol
@@aaronpratt89 yeah same here man! Still got my original super x ped I purchased right when they came out with them. Good times, Glad that gopeds are making a huge comback too, parts are hella expensive for them rn especially if they are rare and or discontinued.
@@JesseK410 discontinued parts for sure are crazy expensive! Ddmracing is still selling a lot of parts tho! I wish Ada racing would still make pipes. They made the best exhaust. The series 1 pipe was the ultimate exhaust system!
I’ve been searching high and low for that little swing arm set up so I can mount an engine on mine. I read the comments above and your bike looks just like the ones I have. They were called “monkey Bikes” even has the green monkey sticker on it. Me and buddies bought a bunch years ago. But where can I find the set up so I can mount an engine? Appreciate any help.
I’m honestly not sure if anyone still makes one. Most people cut the back end of a sport frame off and weld it to the bike. If I locate one I’ll let you know
I wasn’t tuning it in the video. I was just bringing it to life. To tune properly it needs a full load. I have tuned it recently and performed a top speed test. Working on editing it now. Thanks for the interest!
It doesn’t make a difference. Lol, Thats like saying you need to be on it (have it loaded) to tune the carb. No you dnt all you need to do is hold it wide open and adjust the high speed needle then check your plug after. The low speed needle you adjust at idle. 👍🏼👍🏼🏁
Thanks man, honestly I have no idea what I am doing. I watch other videos of how to grow the channel and the main thing is thumbnails. I also try to plan a video by writing out everything I want to cover then I try to cover it in a decent order. It’s obvious when I just film off the seat of my ass. I haven’t uploaded in a few months but I keep getting new subscribers. I am in the process of moving and once I am in my next house I’ll be filming again. There are a bunch of videos that have tips to make a good channel. Look for the ones with have free websites for thumbnails and editing software.
Another thing, I’m using cheap editing software. I think it was like $60. As you can see from the video I am loosing quality because of the cheap software and my old ass laptop lol. I’m filming in 2k but my computer can’t handle it lol. I’ll build a computer just for videos once I am in my next house. Be sure to take advantage of the hash tags tooo it helps the videos appear across different searches. Hang in there man!
I highly recomnd the 290. the LH was such a pony engine to begin with. It reminds me of simple low power 23cc engines found on things like weed wackers and small tillers. The RC engines have more transfer ports and better designed intake and exhaust ports. Its worth it in the long run to run the 290. im only building this for fun. the bike will most likey get a RC engine in the future. I am willing to bet money that a properly tuned stock RC290 will blow this LH engine away lol
I’ve always wanted a dirt bike or some sort of motorised ride on cuz I do nitro and 2stroke gas rc and I love working on them and using em and I can’t image what it would be like to have a dirt bike but then there’s the fact I live in frisco Texas so a really modern area and the bike would have to be street legal, can’t really evade the police over here and the Karen’s on Nextdoor lol
@@slickpads4542 well look into the laws of your area, most motorized machines under 50cc are normally legal in some way. But you have to read the laws to find out what you can ride legally.
@@aaronpratt89 i thought 23cc is for rc car only 🤔 do you have any idea whats best carb for a 49cc engine i have rovan engine here yet it has no carb i bought from surplus, thanks btw
Super underrated content. Period. Immediately subscribed. I’m always looking for goped/high performance small engine content. I am extremely excited for the engine build video, I’ve never seen a performance engine like that been built on RUclips. Cheers, mate!
Thanks for the interest man! Life has been busy lately. Been away from the computer. I’ll have that video up in the next week or so!
Fuckin dope! I'm part of a large motorcycle channel Blockheadmoto... I find it amazing how these gopeds got me into where I am today . 2 Harleys deep and guess what? Im buying every Goped I can get my hands on for a reasonable price . Just had a friend of mine go pick up an early Super Bigfoot in Rancho Cucamonga California and ship it to me here in Orlando haha .. I freakin love these things .. A Riot and Trail ripper are on my list. keep it up bud, maybe Gopeds can make a serious come back!! SUBSCRIBED .
Thanks man!! I’ve been in Goped’s for about 20 years now!!!! I love them!!!
Just got me a mint condition echosport from atl. Circa 2004. Cranks right up
BBR MOTORSPORTS FTW! 👍🏼🏁
Lol it’s just a sticker
@@aaronpratt89 figured you may be into pitbikes cuz thats what bbr specifically makes. Pitbike parts and nasty pitbikes. I like gopeds too but obviously bbr has nothing to do with them. Brapp
@@JesseK410 yea I used to be big into lot bikes! Sold them all, and now they are making a come back lol
I’ve been messing with Goped’s for about 20 years now lol
@@aaronpratt89 yeah same here man! Still got my original super x ped I purchased right when they came out with them. Good times,
Glad that gopeds are making a huge comback too, parts are hella expensive for them rn especially if they are rare and or discontinued.
@@JesseK410 discontinued parts for sure are crazy expensive! Ddmracing is still selling a lot of parts tho! I wish Ada racing would still make pipes. They made the best exhaust. The series 1 pipe was the ultimate exhaust system!
I’ve been searching high and low for that little swing arm set up so I can mount an engine on mine. I read the comments above and your bike looks just like the ones I have. They were called “monkey Bikes” even has the green monkey sticker on it. Me and buddies bought a bunch years ago. But where can I find the set up so I can mount an engine? Appreciate any help.
I’m honestly not sure if anyone still makes one. Most people cut the back end of a sport frame off and weld it to the bike. If I locate one I’ll let you know
Sweet ride man. You should have your rear tire on when tuning your carburetor though, just sayin.
I wasn’t tuning it in the video. I was just bringing it to life. To tune properly it needs a full load. I have tuned it recently and performed a top speed test. Working on editing it now. Thanks for the interest!
It doesn’t make a difference.
Lol, Thats like saying you need to be on it (have it loaded) to tune the carb. No you dnt all you need to do is hold it wide open and adjust the high speed needle then check your plug after. The low speed needle you adjust at idle. 👍🏼👍🏼🏁
Seen you on goped nation sikk video bruv !
Hell yea thanks man!!!
So I thought the same way about head set center lock notch but I saw a video if electric 80 mpb scooter and it purposely done.. but still feels weird
Would you consider selling??
You in Florida fam?
Nashville Tennessee.
Im in florida!
GREAT CONTENT!! How do you get all the views and subscribers? Trying to expand on what i am doing too!
Thanks man, honestly I have no idea what I am doing. I watch other videos of how to grow the channel and the main thing is thumbnails. I also try to plan a video by writing out everything I want to cover then I try to cover it in a decent order. It’s obvious when I just film off the seat of my ass. I haven’t uploaded in a few months but I keep getting new subscribers. I am in the process of moving and once I am in my next house I’ll be filming again. There are a bunch of videos that have tips to make a good channel. Look for the ones with have free websites for thumbnails and editing software.
Another thing, I’m using cheap editing software. I think it was like $60. As you can see from the video I am loosing quality because of the cheap software and my old ass laptop lol. I’m filming in 2k but my computer can’t handle it lol. I’ll build a computer just for videos once I am in my next house. Be sure to take advantage of the hash tags tooo it helps the videos appear across different searches. Hang in there man!
@@aaronpratt89 Well ill continue to follow along and learn a thing or three about gopeds and videos themselves.
@@JChurchua hell yea man!!
Lookin good bro I’d like to get a G23lh head kit or just put a G290 on it
I highly recomnd the 290. the LH was such a pony engine to begin with. It reminds me of simple low power 23cc engines found on things like weed wackers and small tillers. The RC engines have more transfer ports and better designed intake and exhaust ports. Its worth it in the long run to run the 290. im only building this for fun. the bike will most likey get a RC engine in the future. I am willing to bet money that a properly tuned stock RC290 will blow this LH engine away lol
@@aaronpratt89 I’d put money on it too tbh I wanna get one in the future or put a ported big bore kit on my LH
@@jackallred8228 honestly it’s more cost effective to just buy the 290. Anything you do to a LH you can do to a 290 and get better results.
@@aaronpratt89 true dat
that's funy odity but not quite a small scuter
It’s a sketchy fun little bike
Suprised it ran that long without gas lol
Ha! There was a splash in there
You ever gonna sell one of those? Lol
I don’t plan on it. I love these little things. Lol
I’ve always wanted a dirt bike or some sort of motorised ride on cuz I do nitro and 2stroke gas rc and I love working on them and using em and I can’t image what it would be like to have a dirt bike but then there’s the fact I live in frisco Texas so a really modern area and the bike would have to be street legal, can’t really evade the police over here and the Karen’s on Nextdoor lol
@@slickpads4542 well look into the laws of your area, most motorized machines under 50cc are normally legal in some way. But you have to read the laws to find out what you can ride legally.
@@aaronpratt89 hey bro did u join gopednation on FB??? Hit me back let me know im a subscriber just trying to get u to meet the fam!!
i wan't buy that machine, and i build my own mini goped
Is that a new goped bike,
thats cool a 29/32cc engine?
Unfortunately this bike has been discontinued for at least 20 years. It was not manufactured by Goped but supports the same zenoah engines Goped uses.
@@aaronpratt89 oh thats why it doesnt look familiar, anways thats nice you got there small version of riot goped
@@nevertheless2791 it pretty much is! I still need to edit the riding video. It needs a bead lock badly lol. Thanks for the interest!
@@nevertheless2791 oh the engine is the zenoah G23LH. With a head kit. Only 23cc’s
@@aaronpratt89 i thought 23cc is for rc car only 🤔 do you have any idea whats best carb for a 49cc engine i have rovan engine here yet it has no carb i bought from surplus, thanks btw